05 Compliance

The regulatory file for vitamin K1 1% powder

Technical document 05 · Reviewed 2026-11-20 · Vitamin K1 1% Powder

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and limits
  5. Label and claims
  6. Documents for the file
  7. Checklist before the first order

Vitamin K1 1% powder is phytonadione, CAS 84-80-0, dispersed on a carrier. Four things shape the file: the form, the carrier, the destination and the finished-product route. Vitamin K is an established vitamin, but a 1% powder puts a second ingredient into the product, and the carrier has its own permissions, statements and label entry. The buyer's regulatory team confirms the route for each market; this page lists the framework and the evidence to hold.

In one line

Vitamin K is an established vitamin, but a 1% powder puts a second ingredient on the label: the file has to cover the carrier as well as the phytonadione.

What the file contains

The file answers four questions: what material and revision is being bought; which lot is released and on what certificate; which limits and label rules apply to the finished product; and what is re-checked when the source, process or pack changes. The certificate covers the lot, the technical data sheet the specification and the safety data sheet the handling; the destination route stays with the operator.

The powder adds a fifth document set: the carrier. Its identity, food-use status for the category, allergen and GMO statements and specification belong in the file; a certificate that names only phytonadione has left the larger ingredient undocumented.

The isomer statement belongs here too: phytonadione is made by synthesis, and the cis isomer and epoxide are part of the related-substances picture. Ask for the figures on the oil before blending, or a validated method on the powder.

European Union

For food supplements, Directive 2002/46/EC provides the positive lists: Annex I names the vitamins and minerals, and Annex II the permitted forms. The vitamin K entry is form-specific, and phylloquinone is the name to check against the current consolidated text. Labelling follows Regulation (EU) No 1169/2011, including the amount per portion and the percentage of the nutrient reference value; the reference value for vitamin K is 75 µg a day, as of this review.

The carrier is a food ingredient in its own right and has to be acceptable for the category and declared in the ingredient list. National maximum levels and notification procedures for vitamins are not harmonised, so the member state matters as much as the union. Contaminants fall under Regulation (EU) 2023/915, and the general food law duties sit with the operator placing the product on the market.

United States

For a supplement, the file turns on the dietary ingredient and the Supplement Facts panel. Vitamin K is declared under that name with its form in brackets, for example “Vitamin K (as phytonadione)”, and the percentage is calculated against a Daily Value of 120 µg, as of this review. The supplier should name the basis on which it regards the ingredient as a dietary ingredient; the buyer confirms that the basis covers the finished product and the claim.

The carrier is declared in the ingredient list and has to be suitable for the intended use; a carrier that is acceptable in a supplement may not be acceptable in a conventional food. Adding the vitamin to a conventional food is a different exercise with a different label, and the intended use should be settled before documents are collected.

Contaminants and limits

Contaminant limits apply to the finished product. The powder is used in small amounts per serving, but it is about a hundred times the mass of the oil at the same vitamin dose, so the carrier enters the calculation. The table is a starting point; the destination text and the daily dose settle the final limit.

Contaminant limits to check against the finished product
ParameterTypical supplement referenceEvidence the file should hold
Lead (Pb)3.0 mg/kg in the supplementThe lot figure, the method, the limit and the dose calculation
Cadmium (Cd)1.0 mg/kg in the supplementThe lot figure plus any category exception
Mercury (Hg)0.10 mg/kg in the supplementThe lot figure and the method
Arsenic (As)Customer or market limitThe agreed limit, the method and the lot figure

One calculation shows the scale. A 10 mg portion of the 1% powder delivers 100 µg of vitamin K; at the 3.0 mg/kg lead limit the powder would contribute about 0.03 µg of lead. The same dose from the oil uses about 0.1 mg and would contribute about 0.0003 µg. Both figures are small, but the powder's contribution is a hundred times larger, and the carrier's own metals result belongs in the sum.

A 100 mg portion, which a 1 mg claim needs, contributes 0.3 µg. The absolute numbers are still low against a supplement's daily intake, but the arithmetic shows why a carrier certificate is part of the contaminant file.

Label and claims

Claims are governed by Regulation (EC) No 1924/2006 and the authorised list in Regulation (EU) No 432/2012. Vitamin K has entries in that list, each conditional on the amount in the product; for a “source of” claim the threshold is 15% of 75 µg, or 11.25 µg in the daily portion, as of this review. The wording is fixed, and the claim is reviewed apart from the certificate.

In the US, “good source” needs 10% of the Daily Value and “high” needs 20%; against 120 µg those thresholds are 12 µg and 24 µg. A 1% powder can meet either threshold with a small mass of powder, so the claim is easy to trigger and the label arithmetic should be checked.

No disease-related claim is open in either market. The carrier does not carry a claim, and a “natural” statement about the vitamin needs evidence, because phytonadione is made by synthesis. The brand's reviewer signs off the final words.

Documents for the file

  • Specification naming phytonadione, the CAS number and the declared content with its basis.
  • Carrier identity, specification and food-use statement for the destination category.
  • Lot COA with assay, loss on drying, metals, microbiology, particle size and the carrier line.
  • Technical data sheet and safety data sheet.
  • Allergen, GMO, irradiation and animal-derived input statements for the vitamin and the carrier.
  • Residual-solvent and isomer statements for the phytonadione.
  • Nutrition worksheet with vitamin K per portion and the % NRV or % DV.

Checklist before the first order

  • Phytonadione is named, with the declared content and its basis.
  • The carrier is named and acceptable for the destination and the category.
  • The form is checked against the current permitted list for the destination.
  • The contaminant figures are converted to the finished-product dose.
  • The label declares the vitamin form and the carrier.
  • The claim wording and the % NRV or % DV are checked.
  • Source, carrier, process and pack sit under change control.

The product hub carries the catalog specification, the COA page explains the lot certificate and the identity page covers the analytical evidence. The vitamin K1 page covers the parent oil, the methods library describes the HPLC assay, the quality page describes the release file, and the EU regulatory notes carry the framework references.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation