02 Grade comparison

Acetate, succinate or oil: choosing a vitamin E grade

Technical document 02 · Reviewed 2026-11-18 · Vitamin E

On this page
  1. Why the grade is a weighing decision
  2. Three families, four potencies
  3. What the powder is made of
  4. Matching the form to the dosage form
  5. What changes when you switch
  6. When not to switch

Vitamin E is supplied as an acetate, a succinate or a tocopherol oil, and the three are different label ingredients rather than three concentrations of one material. This catalogue's standard grade is dl-alpha-tocopheryl acetate as a 50% water-dispersible powder; the oil and a granulated powder are available on request. The choice follows the dosage form and the potency per milligram, not the headline percentage.

In one line

The ester, the isomer and the carrier decide the potency, the label and the dosage form; a grade change is a new ingredient, not a new concentration.

Why the grade is a weighing decision

A vitamin E dose is written in IU or in milligrams, and a capsule fill, a tablet blend or a stick pack is weighed in milligrams. The grade converts one into the other. At 500 IU per gram of powder, a 30 IU serving is 60 mg of powder, a 100 IU serving is 200 mg and a 400 IU serving is 800 mg. The same 400 IU from the undiluted acetate oil is 400 mg.

The grade question comes before the commercial one: a softgel, a gummy and a drink do not want the same material, and the powder that suits a capsule may be wrong for a clear drink.

Three families, four potencies

Vitamin E forms, their potency and the label name each carries
FormIU per mgCommercial gradeMatrixLabel name
DL-alpha-tocopheryl acetate1.0050% water-dispersible powder; oil on requestModified starch and silicon dioxideDL-alpha-tocopheryl acetate
D-alpha-tocopheryl acetate1.36Powder or oilDeclared carrier or oilD-alpha-tocopheryl acetate
D-alpha-tocopheryl acid succinate1.21Crystalline powderNone, or a declared carrierD-alpha-tocopheryl acid succinate
D-alpha-tocopherol1.49OilCarrier oilD-alpha-tocopherol

The IU per milligram is a property of the molecule, not of the supplier. One milligram of dl-alpha-tocopheryl acetate is defined as 1 IU; the natural d form carries more potency per milligram because only one of its stereoisomers is present. A 50% powder therefore reads 500 IU/g as the dl-acetate, about 680 IU/g as the natural acetate and about 605 IU/g as the natural succinate. The percentage on the quotation is not a potency until the form is named.

The catalogue grade is the first row: the synthetic acetate, 50.0–55.0% by HPLC, which converts to 500–550 IU/g. The window is not a formality; dosing by weight at the low end needs about 10% more powder per IU than at the high end.

What the powder is made of

Tocopheryl acetate is a viscous oil at room temperature, practically insoluble in water. To make it dispersible, the oil is carried on modified starch with silicon dioxide as the glidant, and the result is the white to off-white, free-flowing powder described in this catalogue. The carrier is roughly half the mass. It gives the powder its flow, its dispersion and its dilution factor.

The physical limits support the dosage form: 100% through 40 mesh so the powder blends without lumps, loss on drying at or below 5.0% so it does not cake in the pouch, and dispersion in cool water to a milky emulsion rather than a clear solution. The oil on request is the undiluted ester for softgels; the granulated option is a denser, lower-dust powder for a tableting line.

The succinate is a different physical system: a crystalline solid with low water solubility, sold as a powder rather than an oil. It suits a dry tablet or chewable where an oil is unwanted, and it does not suit a beverage that has to be free of sediment. The three forms also fail differently: the powder cakes with moisture, the oil oxidises and migrates, and the crystalline succinate is stable dry but slow to dissolve.

Matching the form to the dosage form

Dosage forms and the grade that usually fits them
Dosage formUsual gradeWhy
SoftgelAcetate oil, or a 50% powder in an oil suspensionThe fill is already an oil; no carrier is needed
Two-piece capsule50% water-dispersible powderFree-flowing, blends with other powders
Tablet50% powder or granulated powder; succinate for an oil-free tabletCompression tolerance and a dry matrix
Stick pack and drink mix50% water-dispersible powderDisperses in cool water without a high-shear step
Gummy and chew50% water-dispersible powder; granulated on requestDisperses in the cook and survives the deposit

The dose weight decides whether the grade is practical. A 30 IU gummy needs 60 mg of the 50% powder; a 400 IU capsule needs 800 mg, which is a softgel fill rather than a tablet. A small high-dose tablet needs a more concentrated oil or a different format, not more of the 50% powder.

What changes when you switch

Five things change together, and a purchase order that names only one of them has not specified the material:

  • The potency per milligram, and therefore the mass weighed per dose.
  • The label name, because the acetate, the succinate and the tocopherol are separate ingredients.
  • The matrix: carrier, oil or crystalline solid, and the excipients that go with it.
  • The stability file, because a powder, an oil and a crystalline solid fail differently.
  • The process route: blending, compression, cooking or filling.

For this catalogue's grade, write: “DL-alpha-tocopheryl acetate 50% water-dispersible powder; tocopheryl acetate 50.0–55.0% by HPLC; 500–550 IU/g; carrier modified starch and silicon dioxide, declared; loss on drying ≤5.0%; 100% through 40 mesh; dispersible in cool water.” For the oil, replace the carrier and the physical lines with the oil specification. For the succinate, change the name, the IU factor and the label entry, and check the permitted list for the market before the formula is fixed.

The label names the form: DL-alpha-tocopheryl acetate, D-alpha-tocopheryl acid succinate or D-alpha-tocopherol. The EU declaration is in mg α-TE and the ingredient list uses the permitted-list name; the US panel declares vitamin E in mg with the source in the ingredient list. A change of form changes both lines, even when the IU dose stays the same.

When not to switch

A grade switch is not a sourcing shortcut. Do not substitute one ester for another when the label already names the first: the ingredient list and the certificate would disagree with the drum. Do not put the succinate into a beverage that has to be free of sediment, and do not replace an oil in a softgel with a 50% powder unless the fill can carry the extra carrier mass.

In the European Union, the permitted list for food supplements names DL-alpha-tocopheryl acetate and D-alpha-tocopheryl acid succinate, but not the synthetic dl-succinate. A switch that is lawful in one market is not automatically lawful in another, and the label wording follows the list. The acetate versus succinate page sets out that difference in detail.

The catalog ranges are on the vitamin E product page. The certificate lines are explained on the COA page, the light and heat limits on the stability page, and the ordering unit on the MOQ page. The assay itself is described in the HPLC method note.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation