04 MOQ & ordering

Vitamin B12: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Vitamin B12

On this page
  1. Why the floor is 1 kg
  2. Packs and what they protect
  3. Lead time and what sets it
  4. Six details a quotation needs
  5. Samples and qualification
  6. Terms worth fixing before the first order

The minimum order for cyanocobalamin 1% spray-dried powder is 1 kg, supplied as a 1 kg foil pouch drawn from a released lot, with a 25 kg fiber drum for larger quantities. The standard grade ships in 1–7 days; the 0.1% and granulated versions are supplied on request, and the date is confirmed with the quotation. One kilogram is not only a commercial floor: it is enough material for a trial batch, a uniformity check and a retained sample, and small enough to come from a single lot.

In one line

One kilogram is the qualification unit: enough for a trial batch, a uniformity check and a retained sample, and small enough to come from a single released lot.

Why the floor is 1 kg

At 1% and a 100 µg label claim, one kilogram of powder carries 10 g of cyanocobalamin and covers 100,000 portions. The same kilogram covers about 20,000 portions at 500 µg, 10,000 at 1,000 µg, and over four million at 2.4 µg. The quantity is therefore a pilot-scale unit for most formulas, not a token sample, and it is the smallest pack that still lets a customer run a real batch and keep a reserve.

There is a second reason. A 1 kg pouch can be filled from one released lot, so the trial, the retained sample and the first production run can share a lot code. Traceability is the point: if a customer qualifies a grade on a sample from lot A and buys production from lot B, the qualification covers a different powder. The minimum is sized to keep those three uses on one certificate.

Above 1 kg, the 25 kg drum is the production pack. Twenty-five kilograms is the natural multiple for a factory that consumes the powder weekly, and it reduces the number of lot changes and the amount of packaging handled in the dispensary. The two pack sizes are not interchangeable in a stability file: each has its own headspace, liner and opening history.

Packs and what they protect

The 1 kg pouch is a foil laminate, heat-sealed, and the foil is the light barrier as well as the moisture barrier for a photolabile powder. The 25 kg fiber drum carries an inner liner; the liner is the primary barrier and the drum is the handling unit. Neither pack is decorative: a clear bag inside a drum, or a pouch left open between weighings, defeats the protection the specification assumes.

The pack label should carry the product name with the form and dilution, the lot code, the net weight, the carrier, the storage condition and the date of manufacture. The lot code must match the certificate and the retained sample; a repacked pouch without a lot code is no longer traceable to the release. For a customer who repacks into single-use sachets, the repacking room's light and humidity belong in the process risk assessment.

Lead time and what sets it

The standard 1% grade, 80 mesh, ships in 1–7 days. The 0.1% dilution and the granulated grade are supplied on request, so the date depends on the spray-drying or granulation schedule and is confirmed with the quotation rather than assumed from the standard-grade figure. Neither date includes transit, customs clearance or the customer's own incoming inspection.

Documents travel with the lot, not after it. The COA, technical data sheet and safety data sheet should be issued with the shipment, and any additional statement — allergen, non-GMO, halal or kosher — should be requested early enough to be prepared with the same lot. A shipment that arrives without its certificate is a shipment that cannot be released by the customer's quality team.

Six details a quotation needs

A quotation is only comparable when it is built on the same six inputs. Ask for all six in the first message; a reply that quotes a figure without them is quoting a different product.

The six details that change a cyanocobalamin quotation
DetailWhy it matters
Grade and form1% standard, 0.1% on request or granulated; each has its own content, carrier and pack
Quantity and pack mix1 kg pouches or 25 kg drums, and how the total is split between them
Destination and IncotermSets the documents, the freight mode and the point at which risk passes
Document setCOA, TDS, SDS, allergen, non-GMO, halal or kosher, and any customer-specific statement
Additional testsCarrier identity, cobalt by ICP-MS, dye screen, uniformity or a customer method
Market and labelEU, US or UK supply, pack marking and any label text the customer applies

Samples and qualification

A sample is drawn from a released lot and ships with that lot's certificate. The useful sample size covers the assay, the identity scan and a small trial, and the exact quantity is agreed per request rather than fixed on the page. What matters is the link: the sample's lot code should be the lot code quoted for the order.

Qualification usually runs in three steps — document review, a laboratory check on the sample, and a trial batch. The laboratory check should include the HPLC assay, the UV maxima at 361 nm and 550 nm, loss on drying and the carrier identity, because those are the lines that separate one supplier's 1% powder from another's. A sample without a lot code is a data point, not a qualification.

Terms worth fixing before the first order

Five commercial terms decide whether a repeat order runs smoothly: the Incoterm and named place, the payment term, the validity of the quotation, the quantity tolerance on the pack, and the minimum remaining shelf life at delivery. The last one is easy to overlook and hard to fix later, because a lot released months earlier can still be within its retest period while leaving the customer too little time to use it.

Add the non-conformance route: who pays for a repeat test, what happens to a lot that fails the customer's incoming assay, and how a retained sample is used in the discussion. Those clauses belong in the supply agreement, not in an email after the shipment. The packing list, certificate and label should all carry the same lot code and net weight.

The catalog specification is on the vitamin B12 product page. The COA page shows the certificate, the stability page covers the pack and light, and the grade page sets out the dilutions. The commercial terms are defined in the MOQ entry and the lead-time entry.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation