Cyanocobalamin 1% or 0.1%: choosing a B12 grade
The grade follows the label dose and the fill weight. A 1% cyanocobalamin powder carries 10 mg of vitamin B12 per gram, so a 100 µg claim takes 10 mg of powder and a 2.4 µg claim takes 0.24 mg; a 0.1% grade carries 1 mg per gram and multiplies both masses by ten. The carrier changes the mass and the flow, not the molecule, so the switch is a formulation and labelling decision rather than a potency upgrade.
The microgram dose and the milligram fill choose the grade; the percentage on the drum only sets how much carrier enters the capsule.
Why a dilution is the starting point
Cyanocobalamin is dosed in micrograms. At 2.4 µg a portion, the pure crystal would be a fraction of a milligram, which is neither weighable at production speed nor dispersible through a tonne of blend. The dilution answers the handling problem: the vitamin is fixed onto a food-grade carrier at a known ratio, so the operator weighs a visible mass and the mixer receives a powder it can distribute.
The 1% grade is the catalog default and the 0.1% grade is supplied on request. Both are spray-dried powders on starch or maltodextrin; neither is the crystalline vitamin. That distinction matters on the label and in the purchase specification, because “cyanocobalamin” describes the molecule and “1%” describes the mixture.
1%, 0.1% and granulated
| Grade | Content | Mass for 2.4 µg | Mass for 100 µg | Mass for 500 µg |
|---|---|---|---|---|
| 1% spray-dried, 80 mesh | 10 mg/g | 0.24 mg | 10 mg | 50 mg |
| 0.1% on request | 1 mg/g | 2.4 mg | 100 mg | 500 mg |
| Granulated on request | 1% or 0.1% base | As the base grade | As the base grade | As the base grade |
Put the conversion in the batch record. A 1% powder is 10,000 µg/g, so the powder mass in milligrams equals the label claim in micrograms divided by ten. A 0.1% powder is 1,000 µg/g, so the mass in milligrams equals the claim. At 1,000 µg the same arithmetic gives 100 mg of the 1% grade and 1,000 mg of the 0.1% grade, which is already a stick pack rather than a capsule.
What the powder does in the plant
The standard grade passes 80 mesh, which is about 177 µm. That fineness helps distribute a small inclusion through a blend and gives a smooth mouthfeel in a stick, but it also carries static and dust. A granulated version on the same 1% base flows better and generates less dust; it is the grade to discuss when the filling line struggles with a fine powder, not a different vitamin content.
The carrier is the majority of the powder, so its behaviour is the powder's behaviour. Maltodextrin dissolves readily and suits sticks and gummies; starch gives a different bulk density and a matt dispersion. A carrier with a coarse fraction or a different moisture will segregate against other excipients even when the cyanocobalamin is evenly sprayed onto it.
Colour is not a content check. A 1% powder is pale red to pink because the vitamin is intensely coloured; a 0.1% powder is only faintly pink and can look almost white. Two powders of the same shade can differ twofold in assay, so the certificate and not the eye decides the grade.
Fitting the grade to the dosage form
For a 500 mg capsule, 10 mg of the 1% grade at a 100 µg claim is 2% of the fill; 50 mg at 500 µg is 10%. Both are workable inclusions if the premix is made properly. The 0.1% grade at 500 µg fills the whole capsule, so it belongs to smaller claims or larger fills, not to a high-dose capsule.
Tablets follow the same arithmetic against the tablet weight. A 100 µg claim in an 800 mg tablet is 10 mg of the 1% grade, or 1.25% of the tablet, which direct compression can handle if the blend is uniform. The 0.1% grade is the better fit when the dose is 25 µg or less and the tablet is small, because it turns a sub-milligram inclusion into one the feeder can control.
Powder sticks are where the 0.1% grade earns its place. At 2.4 µg in a 5 g stick, the 1% grade is 0.24 mg, or 48 mg per kilogram of finished powder; the 0.1% grade is 2.4 mg, or 480 mg per kilogram, a far easier target for a ribbon blender. Gummies and chews need the carrier checked against the cook: maltodextrin and starch behave differently in a hot, acidic mass, and the grade has to be chosen with the process in view.
What the switch changes
The content specification changes first. A 1% grade is released at ≥1.0% by HPLC, and a 0.1% grade needs its own limit in mg/g rather than a percentage borrowed from the stronger grade. The loss-on-drying window may also need review: at 0.1% the carrier is a larger share of the powder, so the same ≤12.0% ceiling describes more water per gram of vitamin.
Heavy-metal limits are written on the powder, not on the vitamin. The same absolute metal load in the cyanocobalamin is diluted tenfold in the 0.1% grade, so a supplier may meet a tighter customer limit by moving to the weaker grade without improving the vitamin at all. That is a legitimate use of the specification and a reason to compare results per gram of vitamin as well as per gram of powder.
The label changes with the grade. The nutrition declaration states vitamin B12 in micrograms and as a percentage of the reference value — 2.5 µg in the EU and 2.4 µg in the US — never the weight of the dilution. The carrier is listed among the ingredients, and a switch from starch to maltodextrin is an ingredient change even though the nutrient figure is identical. The grade has to be visible in three documents — purchase specification, certificate and technical data sheet — so an auditor can trace it.
When the grade is the wrong answer
No grade fixes a blend that cannot be mixed. If a 2.4 µg claim goes into a 100 mg capsule, the 0.1% grade supplies 2.4 mg of the fill and the uniformity question stays at the capsule filler; a larger fill or a premix step is the real solution. Conversely, a 1,000 µg claim cannot use the 0.1% grade in a capsule, because the powder mass would be the whole fill.
Granulation is a flow decision, not a content decision. It helps when dust, static or segregation is the complaint, and it changes the particle-size specification and the sampling plan. The catalog options are on the vitamin B12 product page; the COA page shows the certificate lines, the stability page covers light and moisture, and the MOQ page lists the packs. The reference values are defined in the NRV entry and the daily-value entry.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation