How we prove a riboflavin 5-phosphate lot is the phosphate
Four lines have to agree before a lot can be called riboflavin 5-phosphate: the documents name the form and CAS number, HPLC retention and the UV spectrum match a flavin reference, phosphorus sits near the theoretical 6.8% on the dried basis, and moisture plus assay close the mass balance. An assay figure by itself cannot distinguish the phosphate from plain riboflavin, or the free acid from the sodium salt; the phosphorus and sodium results do that.
Identity is the agreement of four measurements: the document, the flavin by HPLC and UV, the phosphorus that proves the phosphate, and the mass balance that proves there is no dilution.
The four identity layers
A certificate can carry the correct name and CAS number and still leave the powder unproven. Each row in the table below tests a separate claim — what the document says, which flavin the column detects, whether phosphate is present, which counter-ion sits with it, and whether the numbers balance — so each row needs its own result. A supplier who stops at the first row has sent paperwork, not evidence about the drum.
| Layer | Question | Test | What it proves |
|---|---|---|---|
| Document | Is the form named? | Name, CAS number, formula | Paperwork only |
| Chromatography | Is the flavin the right one? | HPLC retention and UV spectrum | The flavin, not the phosphate |
| Phosphate | Is the phosphate present? | Phosphorus by ICP-OES | The phosphate ester |
| Counter-ion | Free acid or sodium salt? | Sodium by ICP-OES | The salt form |
| Mass balance | Is it diluted? | Assay, loss on drying, impurities | Consistency of the numbers |
The mass-balance layer is the one buyers skip. An assay of 95.0% with 8.0% moisture and a high impurity load leaves less room for the active than the percentage suggests. The numbers have to add up to a plausible powder.
HPLC and UV: proving the flavin
A usable HPLC method for this material states the column, mobile phase, detection wavelength and reference standard, not just “HPLC”. Retention time alone is one coordinate; the UV spectrum is the other, and a peak at the expected minute can belong to riboflavin, to the diphosphate or to a degraded standard. The method should also resolve riboflavin 5-phosphate from plain riboflavin, because the two are different molecules with different retention behaviour.
Ask for the chromatogram, not only the percentage. The phosphate profile matters: free riboflavin and riboflavin diphosphate are process-related forms, and a lot can meet the total assay while carrying more of one of them. The EU additive specification for the sodium salt (Regulation (EU) No 231/2012) sets limits on both; check the current text. A buyer who needs that profile should see the peaks.
UV detection is standard for flavins. The certificate's “HPLC and UV conform” is a conclusion; the chromatogram and the spectrum are the evidence behind it.
Phosphorus and sodium: proving the form
The free acid has one phosphorus per molecule. The theoretical phosphorus content is 30.97 ÷ 456.34 = 6.79% on a dry basis. A result near that figure, with a 95% assay, is consistent with the mono-phosphate. A low phosphorus result points to plain riboflavin or a dilution; a high result points to riboflavin diphosphate or a different phosphate.
The sodium salt has one sodium per molecule: 22.99 ÷ 478.33 = 4.81% on an anhydrous basis, or 4.47% for the dihydrate. The free acid should show no sodium beyond the method's limit. A sodium result near 4.8% points to the sodium salt, not the free acid, whatever the label says.
The molecular-weight ratio is the third number: 376.37 ÷ 456.34 = 0.8248 for the free acid, and 376.37 ÷ 478.33 = 0.7868 for the anhydrous sodium salt. The ratio connects the assay to the label. It does not prove identity on its own, but a ratio that does not close is a signal.
X-ray diffraction: the solid-state check
X-ray diffraction looks at the solid, not the solution: it asks whether the powder is crystalline and whether the diffraction pattern matches a reference material. That makes it useful for spotting an amorphous dilution or comparing a new source with an established lot. It says nothing about how much phosphate or sodium the molecule carries, so it supports identity rather than replacing the wet tests.
Request the reference pattern and the limit of detection before accepting a “match” statement. XRD is not a routine release test for this product. For a disputed lot, XRD plus phosphorus plus HPLC/UV is stronger than any one of them.
What adulteration looks like
A common substitution is plain riboflavin, because it shares the colour and the flavin chromophore. Another is a phosphate blend with more diphosphate, which raises the phosphorus figure while the total assay still passes. A third is the sodium salt sold as the free acid.
| Adulterant | What it does | Signal | Test |
|---|---|---|---|
| Plain riboflavin | No phosphate; shares the colour and spectrum | Phosphorus near zero; separate HPLC peak | Phosphorus by ICP-OES; HPLC/UV |
| Riboflavin diphosphate | More phosphate per flavin | Phosphorus above 6.8%; extra peak | Phosphorus; HPLC |
| Sodium salt sold as free acid | Sodium present; the label names the free acid | Sodium near 4.8% | Sodium by ICP-OES |
| Dilution | Lowers assay and phosphorus | Assay low; loss on drying high | Mass balance; phosphorus |
| Dye | Matches colour, not the spectrum | Colour without a UV match | UV spectrum; HPLC |
Colour is the weakest signal. Yellow to orange-yellow covers a wide range, and a dye can reproduce it. The stronger signals are phosphorus, sodium and the chromatogram. A certificate that reports appearance and assay but not identity has left a likely substitution untested.
How to write the identity into the specification
- “Riboflavin 5-phosphate free acid, CAS 146-17-8, C17H21N4O9P.”
- “Assay ≥95.0% by HPLC; the basis and the molecule are stated.”
- “Loss on drying ≤8.0%; pH 5.0–6.5 at 1% in water.”
- “Identification by HPLC retention and UV spectrum; report free riboflavin and diphosphate.”
- “Phosphorus 6.8% within a stated range, on the dried basis.”
- “Sodium not more than the stated limit for the free acid; report the result.”
- “Particle size ≥95% through 80 mesh; metals and microbiology as listed.”
- “Destination market and form confirmed before the order.”
Five questions for the supplier
- What form is this lot, and what CAS number appears on the certificate?
- Will you send the HPLC chromatogram and the UV spectrum alongside the assay result?
- What phosphorus result was obtained, and on what basis?
- What sodium figure was measured, and by which method?
- What are the lot's free riboflavin and diphosphate figures?
Taken together, the five answers form an identity file that a single assay figure cannot replace. The product hub holds the catalog specification, while the COA page maps each figure onto the certificate. Form differences are set out on the grades page, and the riboflavin page covers the parent nutrient. Label consequences are handled in the level-four comparison, the separation is explained in the methods library, and the quality page covers release.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation