Riboflavin 5-phosphate: free acid, sodium salt or plain riboflavin
Riboflavin 5-phosphate is supplied as the free acid (CAS 146-17-8) or as the sodium salt (CAS 130-40-5), and both differ from plain riboflavin (CAS 83-88-5). The phosphate forms dissolve far more readily in water; the sodium salt carries about 4.8% sodium on a dry basis, and the free acid carries none. The grade decides the assay basis, the label name and the market file, not only the catalogue name.
The grade question is a form question first: riboflavin, the phosphate free acid and the phosphate sodium salt have different CAS numbers, solubility and label arithmetic.
Why the phosphate form exists
Plain riboflavin dissolves only sparingly, about 0.07 g/L at room temperature. Phosphorylation adds a phosphate group to the ribitol side chain and gives a molecule that dissolves readily. That is the practical reason the phosphate form appears in supplements and beverages: it can be dissolved at a concentration plain riboflavin cannot reach.
The phosphate is not a different vitamin. The nutrient declared on the label is riboflavin; the phosphate is the source. The label arithmetic converts it back to riboflavin, and that conversion is where much of the confusion sits.
Two phosphate forms are sold. The free acid is the parent phosphate; the sodium salt is the neutralised form. They have different CAS numbers, different molecular weights and different market entries. A purchase order that says “R5P” has named neither.
The three forms side by side
| Property | Riboflavin | R5P free acid | R5P sodium salt |
|---|---|---|---|
| CAS number | 83-88-5 | 146-17-8 | 130-40-5 |
| Formula | C17H20N4O6 | C17H21N4O9P | C17H20N4NaO9P |
| Molecular weight | 376.37 | 456.34 | 478.33, anhydrous |
| Water solubility | Slightly soluble; about 0.07 g/L | Soluble in water | Soluble; about 1 g in 30 mL |
| Sodium content | None | None | About 4.8%, anhydrous |
| Riboflavin factor | 1.000 | 0.825 | 0.787, anhydrous |
| Label name | Riboflavin | Riboflavin 5-phosphate | Riboflavin 5-phosphate sodium |
The last row is the one that decides the paperwork. As of this review, the EU food-supplement Annex I (Directive 2002/46/EC) names riboflavin and riboflavin-5'-phosphate, sodium; the free acid is a different form. The USP and FCC monographs are written for the sodium salt. A free-acid lot can be a good material and still not be the grade that a pharmacopoeial or EU supplement file expects.
Solubility numbers are approximate and depend on temperature and pH. The useful comparison is the order of magnitude: plain riboflavin is sparingly soluble, and both phosphate forms are much more soluble. The sodium salt is the more soluble of the two.
Solubility, colour and handling
The free acid is a yellow to orange-yellow powder, soluble in water, and the solution is yellow and slightly acidic; the catalog pH is 5.0–6.5 for a 1% solution. The sodium salt is also orange-yellow and more soluble. Both phosphate forms are hygroscopic; this catalog allows up to 8.0% loss on drying for the free acid.
Light sensitivity is shared. The dry powder is more forgiving than the solution; in solution, light causes rapid deterioration. The pack has to be light-resistant and moisture-barrier for either form. A clear jar on a bench is not a storage container for this material.
Particle size is a handling property. The catalog is ≥95% through 80 mesh. A granulated grade flows better and generates less dust; it is a different specification, not a different molecule. If the dosage form needs a coarser powder, say so before the order, because the sieve line changes.
Dose arithmetic and the label
The conversion factor from the free acid to riboflavin is 376.37 ÷ 456.34 = 0.8248. One milligram of riboflavin 5-phosphate free acid delivers 0.825 mg of riboflavin. The anhydrous sodium salt has a factor of 376.37 ÷ 478.33 = 0.7868; the dihydrate, which is the form in the EU additive specification, has 376.37 ÷ 514.36 = 0.7317.
A label that declares 1.4 mg riboflavin, the EU NRV, needs 1.4 ÷ 0.8248 = 1.70 mg of the free acid, or 1.4 ÷ 0.7868 = 1.78 mg of the anhydrous sodium salt. A 10 mg free-acid dose delivers 8.25 mg riboflavin. The US Daily Value is 1.3 mg, so the same arithmetic applies with 1.3 in place of 1.4. None of these figures is a recommendation; they keep the label and the weigh-up consistent.
The assay basis is a second conversion. A 95.0% assay on the dried basis is 87.4% of the powder as-is at 8.0% moisture. Apply the moisture first, then the molecular-weight factor, then the label. Missing a step is the usual error.
What to write into the specification
- “Riboflavin 5-phosphate free acid, CAS 146-17-8, C17H21N4O9P.”
- “Assay ≥95.0% by HPLC, with the basis fixed and the molecule named.”
- “Loss on drying ≤8.0%; pH 5.0–6.5 at 1% in water.”
- “Identification by HPLC retention and UV spectrum; report free riboflavin and diphosphate.”
- “Phosphorus about 6.8% on the dried basis, where the phosphate is to be confirmed.”
- “Heavy metals, microbiology and particle size as listed; ≥95% through 80 mesh.”
- “Destination market and form confirmed before the order.”
If the order is for the sodium salt, the CAS number, formula, sodium line, assay and label all change. Do not carry this specification across. A written change control and a new certificate are the minimum.
When the free acid is the wrong choice
The free acid is the wrong choice when the destination file names the sodium salt, when the label declares the sodium salt, or when the formula needs the highest dissolved concentration. It is also the wrong choice when the buyer expects a USP or FCC monograph, because those monographs are written around the sodium salt.
The sodium salt is the wrong choice when the sodium load matters or when the label names the free acid. The two are not interchangeable at the balance; a switch needs a new specification, a new certificate and a label check. The product hub carries the catalog specification; the riboflavin page covers the parent form; the level-four comparison takes the solubility and label questions further; the compliance page covers the market route; the methods library describes the HPLC work; the quality page covers release.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation