Riboflavin 5-phosphate: MOQ, packs and ordering
The minimum order for riboflavin 5-phosphate is 1 kg, packed as a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum. Standard packs leave within 1–7 days. To turn that into a firm quotation, we need the form and CAS number, the assay basis, quantity and pack, destination and Incoterm, documents, and the intended market.
One kilogram is the minimum because it is the smallest pack that can be sampled, tested and traced as a lot.
Why the minimum is 1 kg
One kilogram is enough for a bench trial, a retained sample and an independent identity check. It also ships as a parcel, which helps when a formulator needs material before the production plan is fixed. Each pack carries a lot code; it is not a scoop from a drum.
Ordering under a kilogram means someone opens a larger lot and repacks a portion. The chemistry does not change, but the pack identity does: extra handling, a new container and a traceability chain that no longer runs back to the original drum. The 25 kg fiber drum spreads handling over more material and ties up more inventory for longer. The minimum is set by what can be packed, labelled and traced as one lot, not by a volume target.
Packs and formats
| Pack | Net weight | Typical use | Notes |
|---|---|---|---|
| Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening |
| Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner |
| Granulated powder | On request | Flow and dust control | Particle profile changes |
| Dilution | On request | Lower assay per gram | Carrier and label change |
The catalog material is milled to 80 mesh, with at least 95% passing that sieve. A granulated or diluted grade is a new specification with its own particle profile or assay, not another way to fill the same pouch. Tell us before the quotation if the tablet press or blender needs a coarser or more free-flowing powder: the sieve line, the bulk density and sometimes the lead time all move with that request.
Lead time and dispatch
A standard pack is dispatched within 1–7 days of order confirmation. That clock covers picking, paperwork and handover to the carrier, not transit, customs or the buyer's own release. A custom granulation, a dilution or an unusual pack size takes longer, and the quotation should show that extra time as a separate line.
Confirm the dispatch date rather than accepting the range. A single pouch normally goes as a parcel, while a drum moves on a pallet. The Incoterm assigns freight booking and entry clearance to one side, so name it early. Lot documents should be in the same shipment as the material, not sent afterwards.
What a quotation needs
Six items make a quotation firm enough to compare:
- Product and form. Riboflavin 5-phosphate, CAS 146-17-8, with the free acid or the sodium salt written out.
- Specification. Assay and basis, loss on drying, pH, particle size, metals, microbiology, phosphorus and sodium where the form is to be confirmed.
- Quantity and pack. A 1 kg pouch or a 25 kg drum; granulated or diluted variants are quoted separately.
- Destination and Incoterm. Country plus port or delivery address, and the trade term that applies.
- Documents. Lot COA, TDS, SDS, allergen and GMO declarations, origin record and any statement the importer requires.
- Intended use and market. Whether the material goes into a supplement, a food or another application, and where it will be sold.
A quotation without the form and the market is incomplete. The same powder can fit one destination and sit outside the file for another. Commercial terms are stated on the quotation, not on this page.
The sample is a lot, not a demonstration
Use the 1 kg pouch as the qualification lot. Before scale-up, run identity, assay, loss on drying, pH, microbiology and phosphorus on it, and keep a portion of the same pack as the retained sample. Sample, COA and quotation should all show one lot code. Material that cannot be tied back to a lot is a demonstration, not a qualification.
A sub-kilogram bench trial is a repack, whatever the label on the bag says. The material comes out of a bulk lot, is handled again and gets a handling record of its own, so it is not the 1 kg foil pack from the catalog. Get the split documented and keep the resulting lot code beside the trial data. The trial powder and the powder in the production drum need not come from the same lot, even when both meet one specification.
Terms to settle before the first order
Commercial and quality terms belong on one quotation: Incoterm, pack, dispatch window, specification revision, a COA for each lot, retained sample, retest period and the change-control route. Put them into a quality agreement before the first production order; reopening the same points after a dispute costs more for both sides.
When a lot falls outside the agreed specification, the evidence starts with the retained sample and a joint re-test using the method named in the specification; a photograph of the drum settles nothing. The quality agreement should name the referee laboratory both sides will accept and who carries its cost. A return argued from appearance alone is difficult to defend on either side.
Catalog specifications sit on the product hub; the COA page sets out release tests; packing and storage are on the stability page; the assay is described in the methods library; release is covered by the quality page; shipping and documents are on the logistics page; the Vitamin B2 page covers the parent form.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation