05 Compliance

The regulatory file for pyridoxal 5-phosphate

Technical document 05 · Reviewed 2026-11-20 · Pyridoxal 5-Phosphate

On this page
  1. What the file has to answer
  2. European Union and the form entry
  3. United States: a different route
  4. Contaminants and the finished-product calculation
  5. Claims and the label boundary
  6. Documents for the file
  7. Checklist before the first order

Pyridoxal 5-phosphate is a vitamin B6 source, and the regulatory file is built around the exact form, the destination and the finished product. The catalog specification and the COA describe the material; they do not establish the route for a market. This page names the framework, the limits and the documents that belong in the file, and it leaves the route decision where it belongs: with the buyer's regulatory team.

In one line

The specification describes the material; the regulatory file has to show the entry, the limits and the label for the destination, and the buyer's team confirms the route.

What the file has to answer

Three questions sit under every market. What is the exact substance, and which entry names it? Do the contaminants meet the destination's limits on the product as sold? Does the label use the source name the entry gives, the right nutrient declaration and claim wording? A COA, a TDS and an SDS answer none of those on their own; they support the answer, and the file records it.

The file should also show how the source, the hydrate form and the pack are kept under change control. A switch from the free acid to the monohydrate, or from one manufacturing site to another, changes the material behind the certificate even when the specification range is unchanged.

European Union and the form entry

Directive 2002/46/EC sets the framework for food supplements in the EU, and Annex II lists the vitamin forms. For vitamin B6, the current list has three entries: 9(a) pyridoxine hydrochloride, 9(b) pyridoxine 5′-phosphate and 9(c) pyridoxal 5′-phosphate. The 9(b) entry is a different phosphate ester; the 9(c) entry matches this material by name. Whether the monohydrate and the finished product fall within that entry for the destination is a question for the buyer's regulatory team, and the current consolidated text is the reference as of this review.

The label has to name the source as the entry names it, so the ingredient list should say pyridoxal 5′-phosphate rather than “vitamin B6” or “P5P”. The nutrition declaration gives vitamin B6 in milligrams and as a percentage of the nutrient reference value, which is 1.4 mg under Regulation (EU) No 1169/2011. The EU has not harmonised maximum levels for vitamins in supplements; several member states set their own, so a multi-market product has to be checked market by market.

Great Britain applies the Food Supplements (England) Regulations 2003, as amended and mirrored in the devolved nations, with its own retained lists; Northern Ireland follows the EU framework. The delivery address decides which file applies, and the decision should be recorded with the order.

United States: a different route

In the US, a dietary supplement is regulated under DSHEA, with current good manufacturing practice under 21 CFR 111 and the Supplement Facts panel under 21 CFR 101.36. The panel declares vitamin B6 in milligrams and as a percentage of the daily value, which is 1.7 mg, while the ingredient list names the form. The name used in the ingredient list is pyridoxal 5′-phosphate.

There is no federal maximum level for lead, cadmium or mercury in dietary supplements. California's Proposition 65 sets a maximum allowable dose level of 0.5 µg per day for lead and requires a warning above it, and state rules or a customer specification can be tighter. The supplier's basis for the ingredient is recorded in the file; the buyer's regulatory team confirms that it extends to the finished product.

Contaminants and the finished-product calculation

The heavy-metal limits apply to the product as sold, not to the raw material in isolation. The table is the usual starting point for a food-supplement file; the destination text and the daily portion decide the final figure.

Contaminant limits to confirm for the finished product
ContaminantEU and UKUS
Lead (Pb)3.0 mg/kg in food supplementsNo federal limit; California Prop 65 applies
Cadmium (Cd)1.0 mg/kg in food supplementsNo federal limit
Mercury (Hg)0.10 mg/kg in food supplementsNo federal limit
Arsenic (As)No harmonised EU limit; national rules may applyNo federal limit

The catalog sets Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. The three EU figures sit at the regulatory maxima, so a lot released at the limit leaves no room for the rest of the formula. Do the arithmetic on the portion: at a 0.1 g portion, a raw material at 3.0 mg/kg lead contributes 0.3 µg of lead, before any other ingredient is counted. The file should carry that calculation and the method behind each result.

Claims and the label boundary

In the EU and the UK, nutrition and health claims are governed by Regulation (EC) No 1924/2006, and only claims on the authorised list may be used, with their conditions of use. A vitamin B6 claim belongs to the nutrient, not to the phosphate form, and the wording on the register is the only wording that can be used. Disease claims are not available for a food supplement.

In the US, a structure/function statement needs substantiation and the DSHEA disclaimer, and a disease claim is not permitted. The raw material carries no claim of its own: the claim belongs to the finished product and to the nutrient. This page describes the material and makes no health claim.

Documents for the file

  • Certificate of analysis with the lot code, the HPLC assay and its basis, loss on drying, pH, identity and the heavy-metal and microbiological results.
  • Specification and technical data sheet naming the hydrate form, the CAS number, the assay basis and the 80 mesh grade.
  • Safety data sheet in the current format, with the dust, light and moisture precautions.
  • Allergen, GMO, irradiation and residual-solvent statements for the lot.
  • Origin and process flow chart, including the drying and milling steps that affect water and particle size.
  • Food-contact declaration for the pouch and the drum liner.
  • The destination route and label review, held by the buyer's regulatory team.

The product hub carries the catalog specification; the COA page shows where each result sits; the identity page covers the analytical evidence; the vitamin B6 product page shows the hydrochloride file for comparison; the quality page describes the release workflow.

Checklist before the first order

  • The form, the hydrate and the CAS number are named in the specification.
  • The EU entry and the US ingredient name have been checked against the current text.
  • The label source name matches the entry for the destination.
  • The assay basis and the loss on drying are printed on the certificate.
  • The contaminant results are converted to the finished-product portion.
  • The claim wording comes from the authorised list or the notification, with its condition of use.
  • COA, TDS, SDS, allergen, GMO, origin and food-contact documents are on file.
  • Source, hydrate form and pack are under change control.
  • The quotation, specification and certificate refer to the same revision.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation