Vitamins & Cofactors · Core range

Vitamin B6

C₈H₁₁NO₃·HCl · CAS 58-56-0 · Pyridoxine hydrochloride, crystalline

Pyridoxine hydrochloride specified at 99.0–101.0% on the dried basis, for capsules, tablets and powder blends where the salt form, the chloride figure and the water content have to be declared.

Assay (dried basis)
99.0–101.0%
Minimum order
1 kg
Indicative lead time
1–7 days
Standard packing
1 kg foil pouch25 kg fiber drum

Specification

What the certificate will report

Assay (dried basis)99.0–101.0% (titration)
AppearanceWhite or almost white crystalline powder
IdentificationIR conforms
pH (5% solution)2.4–3.0
Loss on drying≤0.5%
Residue on ignition≤0.1%
Chloride16.9–17.6%
Heavy metalsPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Particle size≥95% through 40 mesh
Chemical formulaC₈H₁₁NO₃·HCl
CAS58-56-0
Marker setPyridoxine hydrochloride (99.0–101.0%, dried basis)
AppearanceWhite or almost white crystalline powder
SolubilityFreely soluble in water; the 5% solution is acidic (pH 2.4–3.0).

Primary method Titration and HPLC — the method behind each figure matters as much as the figure. How the COA is built →

What to confirm before ordering

  • Name the form: pyridoxine hydrochloride and pyridoxal-5-phosphate are different label ingredients.
  • The chloride figure is an identity check for the hydrochloride; an assay alone does not prove the salt.
  • Pyridoxine is light-sensitive; the pack and the process light exposure belong in the specification.
  • Confirm the assay basis and the water limit; both change the fill weight at a low dose.

Buyer questions

Practical answers

What is Vitamin B6 specified to?

Assay (dried basis): 99.0–101.0% (titration). The full specification adds Appearance, Identification, pH (5% solution), Loss on drying, Residue on ignition and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which form of Vitamin B6 is this?

The catalog grade is Pyridoxine hydrochloride, crystalline. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.

Which dosage forms does this grade fit?

Capsules and tablets, Powder sticks and drink mixes, Gummies and chews. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the crystallisation system
  • Specification comparison against the specification you sent

What this page does not claim

Vitamin B6 is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.

Next step

Send the spec. We will confirm the form.

A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.