01 COA & batch testing

What a pyridoxal 5-phosphate certificate has to show

Technical document 01 · Reviewed 2026-11-20 · Pyridoxal 5-Phosphate

On this page
  1. Reading the sheet from the top
  2. Water, hydrate and the assay basis
  3. The gate and the measurement
  4. Where lots differ
  5. Bringing in an outside laboratory
  6. Comparing two offers

A P5P certificate is read for three things: which solid was released, how much pyridoxal 5-phosphate it contains on a stated basis, and what the water and impurity figures say about the rest of the mass. The catalog specification is the window; the lot certificate is the measurement. The two are comparable only when the hydrate and the assay basis are named.

In one line

The assay is only meaningful with its basis and its hydrate: a P5P figure by HPLC, the water beside it, and an identity that the hydrochloride cannot produce.

Reading the sheet from the top

A laboratory record is auditable when each parameter appears with its method and its release limit. “Conforms” on its own is a verdict without a basis, and a buyer cannot check a verdict. Two rows deserve particular attention on this product: the identity row, which says whether the phosphate is present, and the water row, which decides how the assay should be read.

Release tests for pyridoxal 5-phosphate powder
ParameterMethodRelease limit
AppearanceVisualWhite to off-white powder
IdentificationHPLC retention and UV spectrumConforms to the reference
AssayHPLC with external standard98.0–101.0%
Loss on dryingGravimetric≤8.0%
pH (1% solution)Potentiometry3.0–4.5
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent
Particle sizeSieve analysis≥95% through 80 mesh

The assay comes from a separation, not a titration. The method should specify the stationary phase and mobile phase, the detection wavelength and the reference standard, and it should separate P5P from pyridoxal, pyridoxine and pyridoxamine. A peak at the right retention time is one axis of identity; the UV spectrum is the other.

Water, hydrate and the assay basis

The molecule exists as the free acid (247.14 g/mol) and as the monohydrate (265.16 g/mol). The monohydrate is 6.8% water, and the catalog permits loss on drying up to 8.0%, so the water line cannot be treated as a trace figure. A 99.0% result on the dried solid, with 6.8% water, is about 92.3% as received. The same 99.0% read as-is becomes about 106.2% on the dried basis. Both may be written as “99%”, yet they describe different powders.

The certificate should put the basis in the assay row and print the measured water beside it. The catalog window is 98.0–101.0% by HPLC; the specification has to say whether that window applies to the material as weighed or to the dried solid. An 8.0% water allowance is large enough to move the result by several points, and a purchase order that does not settle the basis cannot be checked at goods-in.

The UV identity carries its own condition: pH. In acidic solution the absorption maximum is near 295–299 nm; above pH 4 it moves to about 388–390 nm, and the solution turns from colourless to yellow. A 1% solution inside the 3.0–4.5 window can therefore show either spectrum. Unless the method fixes the diluent and its pH, the UV result is not reproducible, and “UV conforms” without the preparation says little.

The gate and the measurement

The release limit and the batch result are different numbers and belong in different columns. The gate is what was agreed; the measurement is what the laboratory found in that lot. A sheet that repeats the window in both columns has told the reader nothing about the drum.

How the result column should be filled
ParameterRelease limitResult column
Assay98.0–101.0% by HPLCA measured percentage with the basis and the standard
Loss on drying≤8.0%A measured percentage, with the method
pH3.0–4.5A measured pH with the concentration and the solvent
Heavy metalsPer elementA figure in mg/kg for each element
Particle size≥95% through 80 meshThe measured percentage through the sieve

A pass statement summarises; the rows should let the reader reproduce it. Metals require one figure per element rather than a total. Microbiology requires a count and an absence statement. The assay requires a number, a basis and a method, and without all three it cannot be compared with the next lot.

Where lots differ

Water is the first number to watch between lots. Drying conditions and the pack set it, and the as-is assay follows it down even when the dried-basis figure is stable. pH tracks residual acid and the crystallisation step. Particle size depends on the mill: the catalog grade is 80 mesh, and a granulated or coarser grade is a different finishing specification.

Hydrolysis shows in the related-substance profile. The phosphate ester can split off to pyridoxal, and heat and time are the usual causes. A growing peak beside the main one, or a rising total, is a warning even while the assay remains inside its window. The hydrate form can also shift with drying, which is another reason to read the water row with the assay.

Trends across several lots are more informative than a single result near a limit: water creeping up, pH drifting, the as-is assay falling, or the pyridoxal peak growing. The lot code on the sheet should be the same code on the pouch, the drum and the retained sample.

Bringing in an outside laboratory

Independent testing is worth commissioning when the supplier's sheet cannot settle the question: a new source, a first shipment into a regulated market, a disputed hydrate, or a label that depends on the phosphate figure. The panel should be built around that question rather than repeat the whole certificate. HPLC with a diode array and a pH-controlled diluent covers identity and assay; loss on drying or Karl Fischer covers water; phosphorus by ICP-OES covers the phosphate; chloride by ion chromatography rules out the hydrochloride; the metal panel and microbiology complete the picture.

Detection limits belong in the report. A “none found” entry without a limit describes the sensitivity of the method, not the cleanliness of the lot. Chain of custody also matters: the test should run on the retained sample, the report should carry the lot code, and any referee should receive the sample, the supplier's sheet and the agreed specification. If the form is in dispute, the referee needs the tests that separate the forms, not a second run of the same assay.

Comparing two offers

Six lines expose most of the difference: form and CAS; assay with its basis; water; pH; phosphorus, or chloride where a hydrochloride is suspected; and mesh plus pack. Two offers that both say “98%” but disagree on the hydrate or the basis are not the same material.

Then check traceability. The sheet should identify the manufacturing site, the drying and milling steps, and the hydrate that was released. The catalog window is on the P5P product page; the phosphate tests are on the identity page; the hydrate comparison is on the grades page; the assay separation is described in the methods library; the release sequence is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation