05 Compliance

The regulatory file for D-pantothenic acid

Technical document 05 · Reviewed 2026-11-20 · Pantothenic Acid

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Label and ingredient list
  5. Contaminants and limits
  6. Claims
  7. Documents for the file
  8. Checklist before the first order

D-Pantothenic acid is supplied as the free acid, CAS 79-83-4. The specification and the COA describe the material; the regulatory file has to show that the destination accepts that form, under which name and at what level. The buyer's regulatory team confirms the route; this page lists the framework and the documents that belong in the folder.

In one line

The specification describes the free acid; the market file has to show that the destination accepts that form, under that name and at that level.

What the file contains

A working folder for the free acid has four moving parts: the current specification sheet, the lot certificate, the destination's limits and label rules, and a written trail for any change of manufacturing site, process or pack. The COA is a lot record, the TDS repeats the specification and the SDS addresses handling; none of the three contains the market decision, so keep that decision as its own signed note.

The form is part of that route. Pantothenic acid is the nutrient name, but the market file may be written around a particular salt. The free acid and calcium D-pantothenate are the same vitamin in different chemical forms, with different CAS numbers, assay bases and ingredient-list names. A file that names only “vitamin B5” has not fixed which form it covers.

Keep a versioned document list at the front of the folder. When a specification revision or a pack change arrives, the list is what shows which certificate and which label review were current at the time of shipment.

European Union

For the EU, the food-supplement framework is Directive 2002/46/EC. Annex I lists the vitamins and minerals that may be used, and Annex II lists the permitted substances; as of this review, the pantothenic acid entries in Annex II name calcium D-pantothenate, sodium D-pantothenate, dexpanthenol and pantethine. The free acid is not a separate entry. Whether a free-acid grade can be placed on the market as a pantothenic acid source is therefore a question for the buyer's regulatory team, and it should be resolved before the label is written; check the current consolidated text, because the list can change.

Regulation (EU) No 1169/2011 sets the reference intake for pantothenic acid at 6 mg and uses the name “pantothenic acid” in the nutrition declaration. Contaminants are governed by Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006. The EU regulatory notes collect the framework references.

United States

For a US shipment, the question is its status as a dietary ingredient and whether the intended use sits inside that status. The supplier should write down the legal basis and the document it rests on; the buyer then checks that the same basis reaches the finished product and the Supplement Facts panel. That panel declares pantothenic acid at a daily value of 5 mg, while the ingredient list names the form that was actually weighed.

Manufacture and release sit under the dietary-supplement cGMP rule in 21 CFR 111. A structure/function statement carries its own substantiation file and the DSHEA disclaimer; the certificate does not review either the label or the claim. The US regulatory notes collect the framework references.

Label and ingredient list

The nutrition panel declares pantothenic acid; the ingredient list names D-pantothenic acid. If the formula uses the calcium salt, the list says calcium D-pantothenate, and the salt factor and calcium figure have to be consistent with the declared amount. “Vitamin B5” is a synonym, not the nutrient name on the panel.

Three numbers have to agree: the declared pantothenic acid per serving, the form named in the ingredient list, and the assay basis on the certificate. A label built on the free acid but a market file written around the salt is a mismatch that no certificate can repair. The form comparison sets out the conversion.

Contaminants and limits

Read the contaminant panel as a finished-product sum, not a drum-only result. The table below is a starting reference for a supplement file; the destination's current text and the daily dose settle the number that applies.

Contaminant limits to confirm for the finished product
AnalyteSupplement-level referenceEvidence to hold
Lead (Pb)3.0 mg/kg in the supplementLot result and method, with the limit recalculated for this dose
Cadmium (Cd)1.0 mg/kg in the supplementLot result, plus any category exception for the supplement
Mercury (Hg)0.10 mg/kg in the supplementLot result with the analytical method named
Arsenic (As)Customer or market limitThe agreed limit and its method, both printed on the certificate

The catalog limits — Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg — are release gates for the ingredient. They are not automatically the finished-product limits, because the daily dose and the matrix change the calculation. Microbiology belongs in the same review: the counts and absence statements on the COA are ingredient results, and the finished product has its own specification.

Claims

No disease-related claim is made for this ingredient on this site. In the EU, authorised function claims for pantothenic acid exist and are tied to source conditions, including the 15% reference-intake threshold per portion; the exact wording, the serving and the qualification are the brand's review. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. Energy or metabolism language is mechanism language, not an authorisation, and a claim revision never reopens the specification.

Documents for the file

The buyer's folder needs the COA with the HPLC assay and its basis, the IR identity, loss on drying, pH, heavy metals and microbiology; the TDS with the same specification version; the SDS; the allergen, GMO, origin and residual-solvent statements as applicable; and a written statement that the material is the free acid, not a salt or a blend. Add the destination route and the label review.

The specification must name D-pantothenic acid, CAS 79-83-4 and the assay basis; a certificate that says only “pantothenic acid 99%” has left the form and the moisture basis open. The product page carries the catalog specification, the COA page explains the lot certificate and the quality page describes the release file.

Checklist before the first order

  • Specification version, CAS number and the free-acid form are named.
  • COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements sit in the folder.
  • Contaminant results are recalculated against the finished-product dose.
  • The label declares pantothenic acid and the ingredient list names the free acid.
  • The destination route for the free acid has been confirmed in writing.
  • The quotation, the specification and the certificate refer to the same version.

The vitamin B5 page shows how the calcium salt handles the same framework, and the methods library describes the tests behind the certificate.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation