How to prove a mixed tocopherol lot by its profile
Identity for mixed tocopherols is established by the document and the chromatogram together: the name and CAS 1406-66-2, HPLC retention and UV spectrum, the four quantified homologues, and a mass balance that includes peroxide value. A total percentage by itself cannot distinguish a genuine mixed profile from a diluted oil, a gamma-rich substitute or an alpha-spiked blend.
A mixed tocopherol lot is identified by its four-homologue HPLC profile, not by the total: the total says how much tocopherol is present, the profile says which ones and in what proportion.
The four checks, and what each proves
Each line answers a different question. An answer to the first alone proves only that the paperwork is consistent; the profile is the line that separates one mixed tocopherol product from another.
| Check | What it asks | Evidence | What it shows |
|---|---|---|---|
| Document | Is the material named? | Name, CAS 1406-66-2, feedstock record | Paperwork only |
| Chromatography | Is it a tocopherol? | HPLC retention and UV spectrum | The molecular family |
| Profile | Which homologues, and how much? | Quantified alpha, beta, gamma and delta | The mixture itself |
| Balance | Diluted, oxidised or spiked? | Total, peroxide value, colour, carrier | Whether the numbers agree |
The homologue ratio is the identity
The homologues are built on the same chromanol ring and phytyl tail; they differ in methylation. Alpha carries three methyl groups, beta and gamma two, delta one. The catalog places alpha at 10.0–20.0%, gamma at 50.0–70.0% and delta at 10.0–20.0%, with at least 90.0% total. Beta is not specified; the EU vitamin E entry, as of this review, requires it below 10%.
The published windows do not fix a ratio. Gamma divided by alpha can range from 2.5 to 7 within the catalog, and delta divided by alpha from 0.5 to 2. A figure outside those ranges is a reason to ask for the individual results, not an automatic rejection; natural variation can sit anywhere inside the windows. Near the edges, the individual figures matter more than the ratio.
Alpha also has a boundary the catalog does not express. The catalog permits 20.0%, while the EU footnote requires less than 20%. A lot at the top of the window therefore needs its measured value to decide the EU position. And two lots with the same 92% total can differ twofold in alpha, which changes the vitamin E arithmetic even though the headline agrees.
X-ray diffraction: a solid-state tool
An oil is amorphous, so X-ray diffraction has little to say about the neat product; there is no sharp pattern to compare. The technique measures neither homologue composition nor oxidation, and it cannot tell alpha from gamma.
For the powder on carrier, diffraction becomes useful. It can identify a crystalline carrier, detect the substitution of an amorphous carrier such as maltodextrin, and show whether a crystalline diluent has been added. In a disputed powder lot, combine XRD with the HPLC profile and peroxide value, and ask for the reference pattern rather than a statement that the result “matches”.
Substitution patterns and their signals
| Route | What changes | Signal | Test |
|---|---|---|---|
| Carrier oil dilution | Lowers total and alpha per gram | Total below 90%; paler oil; its own peroxide value | Total, profile, balance |
| Gamma-rich cut | More gamma, less alpha | Gamma above 70%; alpha below 10% | HPLC profile |
| Alpha spiking | Raises alpha and the vitamin E figure | Alpha above 20%; a pattern unlike the source | Profile plus feedstock record |
| Synthetic dl-alpha | Alpha without the natural configuration | Rotation or chiral ratio inconsistent with the profile | Chiral separation, polarimetry |
| Tocopheryl acetate | An ester, not a tocopherol | Ester carbonyl; the result changes on hydrolysis | FTIR, HPLC after hydrolysis |
| Oxidised oil | Total falls, peroxide value rises | Peroxide value high; dark colour | Peroxide value, p-anisidine, appearance |
Colour is the least specific indicator: yellow to amber spans a wide range, and a fresh concentrate may be darker than a diluted one. The profile, peroxide value and mass balance are stronger evidence. A certificate that shows total and appearance but omits the individual homologues leaves the most probable substitution untested.
What the specification should say about identity
- “Mixed tocopherols, alpha/beta/gamma/delta, CAS 1406-66-2, oil; feedstock named.”
- “Total ≥90.0% by HPLC; alpha 10.0–20.0%, gamma 50.0–70.0%, delta 10.0–20.0%.”
- “Beta reported; the EU vitamin E entry caps it at 10.0%.”
- “HPLC retention and UV identification; chromatogram and spectrum with each lot.”
- “Peroxide value ≤10.0 meq O₂/kg; yellow to amber oil.”
- “No carrier oil or other tocopherol source above the agreed limit.”
- “Pack, storage condition and retest period stated.”
Five answers to request in writing
- Which homologues are present, and what are the alpha, beta, gamma and delta values?
- Can you supply the chromatogram and UV spectrum, not just the total?
- What is the beta value, and does the lot meet the EU composition footnote?
- What is the feedstock, and what was the peroxide value at release?
- If the profile is challenged, will you retest the retained sample with our laboratory?
Written answers to those five make an identity file; a total percentage does not. Catalog limits are listed on the product hub, and the COA page maps each value to its certificate line. The grades page compares oil, powder and alpha concentrate; the level-four page follows the label consequences; the HPLC note explains the separation; the quality page covers release.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation