01 COA & batch testing

What the COA for mixed tocopherols has to report

Technical document 01 · Reviewed 2026-11-20 · Mixed Tocopherols

On this page
  1. Reading the certificate as measurements
  2. The total is a sum; the profile is the breakdown
  3. The limit and the measured result
  4. Lot-to-lot variation
  5. When an independent test is warranted
  6. Comparing two offers

The lot certificate for mixed tocopherols lists seven things a buyer can check: the appearance, the HPLC identification, the total tocopherols, the four individual homologues, the peroxide value, the metals and the microbiology. A useful certificate pairs each figure with its method and with the limit the lot had to meet. The values below are catalog limits; the certificate is the only document that speaks for a specific bottle.

In one line

The certificate has to report the total tocopherols and the alpha, gamma and delta figures separately, because the total alone does not describe the mixture.

Reading the certificate as measurements

Read a certificate as a set of measurements, not as a badge. For every parameter, the reader needs to know what the laboratory measured, how it measured it, and what boundary the lot was released against. “Conforms” is a verdict; the chromatogram and the numbers are the evidence.

The identity test and the profile test are not the same. Retention time and ultraviolet spectrum answer “is this a tocopherol?”; the four quantified peaks answer “which tocopherols, and in what ratio?”. A total with no breakdown describes a category.

Release lines for a mixed tocopherols lot
ParameterTestLimit
IdentificationHPLC retention and UV spectrumMatches the reference
AppearanceVisualYellow to amber oil
Total tocopherolsHPLC with UV detection≥90.0%
Alpha-tocopherolHPLC10.0–20.0%
Beta-tocopherolHPLCNot set in the catalog; report the value
Gamma-tocopherolHPLC50.0–70.0%
Delta-tocopherolHPLC10.0–20.0%
Peroxide valueIodometric titration≤10.0 meq O₂/kg
Heavy metals and microbiologyICP-MS; plate count and absence testsPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent

The total is a sum; the profile is the breakdown

HPLC separates the homologues and quantifies each one; the total is what remains when the peaks are added. The catalog sets alpha at 10.0–20.0%, gamma at 50.0–70.0% and delta at 10.0–20.0%, with at least 90.0% total. Add the three windows and the possible sum runs from 70% to 110%, which is why the total cannot be reconstructed from the published ranges alone: beta and the minor part of the concentrate fill the gap.

Two lots can share a 91% total and still be different oils. One might run 10% alpha, 55% gamma and 15% delta; another 20% alpha, 50% gamma and 20% delta. Both pass the catalog. The first has half the alpha of the second, and alpha is the fraction the vitamin E arithmetic starts from. That is the practical reason the certificate reports each homologue.

No drying step applies: the oil is weighed as it is, and the assay is as-is. An anhydrous figure would describe a different material. The peroxide value, in milliequivalents of oxygen per kilogram, reports the oil's oxidation condition rather than its composition, and it is usually the first line to move in storage.

Beta deserves its own line. The catalog leaves it unset; the EU vitamin E entry for mixed tocopherols, as of this review, caps beta at 10% while also requiring alpha below 20%, gamma 50–70% and delta 10–30%. Three passing figures do not prove the fourth, so a certificate without beta cannot close the EU check.

The limit and the measured result

A release limit is a boundary; a result is a measurement. Keep them apart. If the result column repeats the specification range, the certificate has told the reader where the gate is, not whether the lot passed it.

Result entries for the release tests
ParameterLimitWhat the result must report
Total tocopherols≥90.0%The measured sum, with the four homologue values
Alpha, gamma, deltaPer windowOne measured value per homologue
BetaReported; EU entry below 10.0%A measured value, not a conformity statement
Peroxide value≤10.0 meq O₂/kgThe measured figure and the method used
Heavy metals and microbiologyPer element; counts and absenceEach element in mg/kg; the count and the absence statement

Peroxide value is worth a number, not a tick. A lot released at 9.5 meq O₂/kg has little room before the specification is breached, and the oil may cross it while the total tocopherols still look normal. Each metal also needs its own figure; a combined heavy-metals number can conceal the element that is out of line.

Lot-to-lot variation

Feedstock and processing explain most lot-to-lot movement. Mixed tocopherols are recovered from a vegetable-oil deodorizer distillate, commonly soy, sunflower or rapeseed, and the starting distillate sets the homologue pattern. The concentration step then fixes how much total tocopherol remains and where the individual figures land inside the catalog windows.

The peroxide value is the most variable line. Its level reflects the age and heat history of the distillate, the headspace in the holding tank and the interval before filling. Colour tends to follow: a darker, less bright oil usually signals storage or oxidation before it signals a different identity.

A gradual drift and a step change mean different things. Slow movement inside the windows is normal; a sudden shift in the alpha-to-gamma relationship, with a steady total, can point to a new feedstock or a blend. Keep the trend file and match the certificate lot code to the bottle, the carton and the retained sample.

When an independent test is warranted

Use an outside laboratory for a new source, a first import into a regulated market, a profile the supplier will not itemise, or a result you dispute. Do not order a duplicate of the whole certificate. Ask for HPLC with the chromatogram and UV spectrum, quantified alpha, beta, gamma and delta, peroxide value, p-anisidine value for secondary oxidation, the metal panel, microbiology, and a residual-solvent screen if the extraction or concentration step uses one.

Where synthetic alpha is a possibility, add a chiral separation; a standard achiral HPLC method cannot distinguish d-alpha from the racemic material. For every “not detected” result, ask for the limit of quantification. Without that limit the entry describes the sensitivity of the method, not the absence of the substance. Retain the sample that was tested, and require the report to identify the lot and pack.

Comparing two offers

Compare six lines before anything else: the form and CAS number; the total plus each homologue; beta; peroxide value at release; feedstock and concentration record; and pack plus lot code. A quotation that matches on the total but not on alpha or beta is offering a different oil.

The paper trail is the second layer. The manufacturer, feedstock and lot should be named, and the quoted specification should carry a revision number. The catalog limits are listed on the mixed tocopherols product page. The grade question is handled on the grades page; the analytical separation of a genuine profile from a blend is on the identity page; the HPLC method is explained in the HPLC note; the release sequence is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation