Mixed tocopherol grades: the oil, the powder and the single homologue
The catalog form is a mixed tocopherols oil carrying at least 90.0% total tocopherols, with alpha at 10.0–20.0%, gamma at 50.0–70.0% and delta at 10.0–20.0%; a powder on a carrier can be quoted on request. Total and profile together define the grade, because either figure alone leaves the vitamin E contribution and the antioxidant role undetermined. The single alpha concentrate is a separate product, not a stronger version of this oil.
The grade is the total and the profile together: a 90% mixed oil with 15% alpha is not a 90% alpha concentrate, and a powder adds a carrier the label must name.
Why “mixed” is a grade question
A percentage can hide a product. An oil described as 90% tocopherols might be almost all alpha, or it might be a gamma-rich mixture with only a sixth of its mass as alpha. The first is built for vitamin E potency; the second is built for the whole tocopherol pattern. Both can carry the same headline number and still be wrong for each other's application.
Two choices in the plant create the grade. The distillate feedstock decides which homologues are available, and the concentration step decides how much of each survives. If the purchase order fixes only the total, the supplier still controls the profile, and with it the label arithmetic.
The catalog grade and its neighbours
| Grade | Total and profile | Form | What it is for |
|---|---|---|---|
| This grade, oil | ≥90.0% total; alpha 10–20%, gamma 50–70%, delta 10–20% | Oil | Antioxidant use and mixed-profile supplements |
| Powder on carrier, on request | Total set by the oil load; the same profile, diluted | Powder | Tablets and dry blends |
| Alpha concentrate | ≥90.0% d-alpha-tocopherol | Oil | Vitamin E potency and a d-alpha label |
| Tocopherol-rich extract | Lower total, diluted in oil | Oil | Antioxidant use where a lower total is enough |
The table separates the catalog grade from the products next to it. The powder is the same oil on a carrier, not a different concentration; the alpha concentrate is a one-homologue product; the tocopherol-rich extract is a lower-total oil used for antioxidant duty. Each has its own specification and label.
Because the powder carries a carrier, its tocopherol content per gram falls and the carrier must be declared. The alpha concentrate has CAS 59-02-9 and a d-alpha label. The extract is defined by its own total and carrier oil, not by this catalog.
Viscosity, colour and the carrier
Mixed tocopherols are a viscous, fat-soluble oil. They do not dissolve in water; they dissolve in edible oils, ethanol and common organic solvents. Density is roughly 0.95 g/mL, so volume and weight diverge in a fill calculation. The oil pours slowly at room temperature and may thicken in a cold store; bring it back to room temperature and mix before drawing a sample. Gentle warming is enough — prolonged heat is an oxidation risk.
The colour range is yellow to amber. Oxidation darkens the oil, so a darker bottle should prompt a peroxide check before it prompts a grade complaint. Amber glass is functional: it reduces the light that accelerates oxidation, and a clear container is a poor substitute.
In the powder grade the oil is spread over silica, maltodextrin, starch or another carrier. Flow and dispersibility improve, but the tocopherol load per gram drops and the carrier becomes part of the label. Carrier identity, source and loading rate all belong in the specification.
From alpha percentage to fill weight
The vitamin E figure is calculated from alpha, not from the total. With 1.49 IU per milligram of d-alpha-tocopherol, an oil at 10–20% alpha works out at roughly 149–298 IU per gram. Gamma and delta are tocopherols, but they are not the alpha molecule behind the IU conversion. The IU value is an arithmetic result from the batch assay; the certificate does not certify it as a separate measurement.
Mass per dose follows the same route. To declare 15 mg alpha-tocopherol, a 15% oil needs about 100 mg, a 10% oil about 150 mg and a 20% oil about 75 mg; a 90% alpha concentrate needs about 16.7 mg. These are different fill weights, and the gap is a property of the grade.
The dose form narrows the choice further. Softgels take the oil and are limited by fill volume. Tablets and two-piece capsules can take the powder, spreading the dose over more mass. A clear beverage needs an emulsion, since the neat oil will not disperse. When the tocopherol is used as an antioxidant, the dose is a percentage of the fat or oil being protected, not a milligram figure of vitamin E.
Specification clauses for this grade
- “Mixed tocopherols, alpha/beta/gamma/delta, CAS 1406-66-2, oil.”
- “Total ≥90.0% by HPLC; alpha 10.0–20.0%, gamma 50.0–70.0%, delta 10.0–20.0%.”
- “Beta reported; the EU vitamin E entry caps it at 10.0%.”
- “HPLC retention and UV identification; chromatogram supplied with the lot.”
- “Peroxide value ≤10.0 meq O₂/kg; yellow to amber oil.”
- “Metals and microbiology as listed; feedstock source named.”
- “If powder: carrier, source and loading rate.”
- “Pack, headspace, storage condition and specification revision.”
Where another grade fits better
A d-alpha label rules this oil out, no matter how close the total appears. A small fill that must carry a large vitamin E dose rules it out too: the mixed oil needs roughly four to nine times the mass of a 90% alpha concentrate for the same alpha figure. A dry powder with a long warehouse life may be better served by the acetate, whose ester group protects the phenol.
The opposite case is equally clear. If the formula needs gamma and delta beside alpha, an alpha concentrate cannot supply them, even at a higher assay. The grade table settles potency; the matrix settles form. The product hub has the catalog limits; the level-four comparison follows the label question; the COA page shows the profile reporting; the vitamin E page covers the synthetic acetate powder; the HPLC note describes the separation.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation