Methylcobalamin grades: crystal, granulation and the fill
Methylcobalamin is supplied as a crystalline powder at 98.0–101.0% by HPLC; the other options are a granulated form of the same powder, a dilution on a carrier for a low-dose fill, and the separate cyanocobalamin product. The grade is set by the dose per unit, the fill weight and the label, not by the assay number alone. A high assay on a powder that cannot be weighed accurately is not a better grade for a 100 µg capsule.
The grade is a dose decision: a crystalline methylcobalamin suits a milligram weigh-up, while a microgram dose needs a dilution whose carrier and uniformity are part of the specification.
Why methylcobalamin is sold in more than one grade
The catalog grade is the crystalline powder, and “grade” here does not mean a ladder of purities; it means the physical form and the dilution that the dosage form needs. Two facts drive the choice. First, the vitamins are dosed in micrograms: a 1,000 µg serving is one milligram of the active, and a 100 µg serving is a tenth of a milligram. Second, the powder is light-sensitive and hygroscopic, so every extra handling step is a chance to expose it. A formulator who can weigh a milligram accurately may use the crystal; one filling a 300 mg capsule with a 500 µg dose needs a dilution to carry the active evenly through the fill.
A granulated methylcobalamin is the same molecule with a coarser, freer-flowing particle. It answers dust, static and flow problems on a high-speed line. It does not change the assay, the label or the light sensitivity, but it does change the particle-size line and may change the lead time.
The grades side by side
| Grade | Assay expression | Carrier | Typical use | Label effect |
|---|---|---|---|---|
| Crystalline powder, 80 mesh | 98.0–101.0% by HPLC | None | Milligram weigh-up, stock blends, capsules with a premix | Methylcobalamin named as the ingredient |
| Granulated powder | 98.0–101.0% by HPLC | None | Flow and dust control on a filling line | Same ingredient name; particle size changes |
| Dilution on a carrier | Declared as the nutrient per gram | Declared, food-grade | Microgram doses and small fill weights | Carrier becomes an ingredient |
| Cyanocobalamin 1% powder | ≥1.0% by HPLC | Starch or maltodextrin | The separate, more stable B12 grade | Different ingredient name |
The last row is a different product, not a grade of this one. It appears here because a buyer comparing B12 forms will meet it, and because its assay is expressed as a dilution percentage rather than as the purity of a crystal. A 98.0–101.0% methylcobalamin figure and a ≥1.0% cyanocobalamin figure describe different materials on different bases. The catalog covers the crystalline powder and the granulated form; a dilution is a separate brief, built by the customer or specified as its own project.
The physical facts that decide handling
The catalog powder is dark red and crystalline, with ≥95% through 80 mesh. It is only slightly soluble in water and gives a red solution at low concentration; a concentrated stock may need warming or a pH adjustment. The solid picks up moisture, and the loss-on-drying gate is ≤10.0%, which is wide enough that the packing and storage conditions do real work. Light is the other handling fact: the powder belongs in an opaque or foil pack, and a clear jar on a bench is an exposure, not storage.
Bulk density and flow are not in the catalog specification. If the filling line is sensitive to either, ask for the figures on the lot rather than assuming them from the mesh size. Granulation changes the flow and the dust, and it can change the bulk density; it is a separate specification, not a packing note.
Dose arithmetic and the fill
A 1,000 µg label claim needs about 1.0 mg of methylcobalamin at 100% assay, or 1.02 mg at 98.0%. A 100 µg claim needs about 0.10 mg. Those masses are small against a capsule fill of several hundred milligrams, so the active is almost always carried into the fill as part of a premix or a dilution. The label declares vitamin B12 in micrograms, while the certificate describes the methylcobalamin powder; the two figures are linked by the assay and the serving weight, and they should be calculated together.
A dilution is a formula, not a favour. Its carrier is declared, its assay is expressed per gram of the dilution, and its uniformity has to be demonstrated at the low dose. The crystalline grade remains the reference material behind that dilution, which is why the lot code on the crystal should be traceable through the blend. If the label names methylcobalamin, the dilution must be made from methylcobalamin and not from cyanocobalamin, however similar the two look.
What to write into the specification
- “Methylcobalamin, CAS 13422-55-4, C63H91CoN13O14P.”
- “Assay 98.0–101.0% by HPLC against a methylcobalamin reference standard, with the basis stated.”
- “Identification by HPLC retention and UV-Vis spectrum; report the maxima and the absorbance ratios.”
- “Loss on drying ≤10.0%; heavy metals and microbiology as listed.”
- “Particle size ≥95% through 80 mesh; granulated on request.”
- “Pack in a light-resistant, moisture-barrier pouch or drum; state the storage condition.”
- “Destination market and permitted-form route confirmed before the order.”
When the crystalline grade is the wrong buy
If the serving is a few hundred micrograms and the fill is a direct-compression capsule, the crystal is the wrong starting point: the weigh-up is too small to distribute evenly, and a dilution or a premix is the practical route. If the market file names the cyano form, the methyl crystal is outside that file even when the assay is higher. If the formula is an aqueous drink, the light and solution stability of the methyl form has to be validated before the grade question is settled.
The reverse is also true. A buyer who needs a clean label with no carrier should not accept a dilution as “the same material” and adjust the number afterwards. The carrier is an ingredient, and the label has to say so.
The product hub carries the catalog specification. The COA page shows how the assay is reported; the stability page covers the light and moisture margin; the level-four comparison takes the form question further; the cyanocobalamin product page describes the adjacent grade; the HPLC method note describes the assay; the quality page covers release and change control.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation