02 Grade comparison

Adenosylcobalamin grades: crystal, granulation and the fill

Technical document 02 · Reviewed 2026-11-20 · Adenosylcobalamin

On this page
  1. Why adenosylcobalamin is sold in more than one grade
  2. The grades side by side
  3. The physical facts that decide handling
  4. Dose arithmetic and the fill
  5. What to write into the specification
  6. When the crystalline grade is the wrong buy

The catalog supplies adenosylcobalamin as an 80 mesh crystalline powder; a granulated version is available on request, and a carrier dilution is a separate project. The grade question is really a filling question. A 1,000 µg dose is one milligram of active, so the crystal can be weighed for a premix, but a 100 µg dose in a 400 mg capsule usually needs a dilution to distribute it evenly.

In one line

The grade is a handling decision: the crystal suits a milligram weigh-up, a granulation suits flow on the line, and a microgram dose needs a dilution whose carrier is declared.

Why adenosylcobalamin is sold in more than one grade

There is no purity ladder here. Crystal, granulated crystal and dilution contain the same molecule; they differ in particle size and in what else is in the scoop. The crystal is the reference grade, granulation is a flow fix, and a dilution is a dosing aid with a declared carrier.

Handling pushes the choice as much as dose does. Adenosylcobalamin is hygroscopic and loses its upper ligand under light, so a grade that reduces openings and transfers has value beyond its certificate. Granules flow better and raise less dust; a dilution removes many tiny weigh-ups from the line.

The grades side by side

Adenosylcobalamin grades and the adjacent methylcobalamin product
GradeWhat it isAssayTypical useLabel effect
Crystal, 80 meshPure crystalline powder≥95.0% by HPLCMilligram weigh-up or premixIngredient named as adenosylcobalamin
Granulated crystalCoarser particle, no carrier≥95.0% by HPLCFlow and dust controlSame name; particle size changes
Carrier dilutionActive on a food-grade carrierDeclared per gramMicrogram doses and small fillsCarrier is an ingredient
MethylcobalaminA different coenzyme form98.0–101.0% by HPLCSeparate productDifferent ingredient name

The last row is not a grade. Methylcobalamin is a different cobalamin with a different CAS number, standard and label name, and its assay range is not a higher setting of the same gauge. The catalog itself covers the crystal and the granulated form; a dilution is quoted as its own brief.

The physical facts that decide handling

The crystal is red-orange to dark red and ≥95% passes 80 mesh. Water solubility is slight, and a red solution forms at low concentration; a more concentrated stock may need warming or pH adjustment. Moisture is capped at 10.0% at release, and the powder belongs in a foil or opaque pack between uses.

Assay says nothing about flow. If the line is sensitive to bulk density or dust, request the lot figures and discuss granulation; the 80 mesh line describes the standard powder, not a guarantee for every filling machine.

Dose arithmetic and the fill

At 100% assay, 1,000 µg is 1.0 mg; at 95.0% it is about 1.05 mg. A 500 µg serving is half that, and 100 µg is about 0.1 mg. These weights are small against the fill, so the active normally enters through a premix or a dilution. The label declares the vitamin B12 figure, not the powder weight.

A dilution has its own specification: carrier identity, active content per gram, uniformity at the low dose and a link to the crystal lot. The carrier appears in the ingredient list. A clean-label product may keep the crystal and make the premix in-house, provided the uniformity is validated.

What to write into the specification

  • “Name: adenosylcobalamin; CAS 13870-90-1; formula C72H100CoN18O17P.”
  • “Purity: ≥95.0% by HPLC, run against an adenosylcobalamin reference standard; state as-is or dried.”
  • “Identity: HPLC retention plus UV-Vis; record the maxima and the absorbance ratios.”
  • “Water: loss on drying ≤10.0%; metals and microbiology per the catalog panel.”
  • “Size: ≥95% through 80 mesh; granulation is quoted separately.”
  • “Pack: foil or drum with a light and moisture barrier; storage condition in the contract.”
  • “Market: confirm the permitted-form route before the purchase order.”

When the crystalline grade is the wrong buy

Do not start with the crystal when the serving is a few hundred micrograms in a direct-compression capsule: the weigh-up is too small to spread evenly. Do not use it in a clear aqueous drink without a light and solution study. Do not offer it for a market whose file names another B12 form.

Conversely, do not accept a dilution when the label must carry no carrier, and granulation is not a packing note. Each is a specification change with its own carrier or particle-size line.

The hub holds the catalog specification. Assay reporting is explained on the COA page; the light and moisture margin is on the stability page; the level-four comparison goes further on form; the methylcobalamin page covers the adjacent product; the methods library covers HPLC; release and change control are on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation