03 Stability

PQQ disodium is light- and moisture-sensitive; the pack decides the shelf life

Technical document 03 · Reviewed 2026-11-19 · PQQ

On this page
  1. The powder: moisture, light and colour
  2. The solution: the least stable format
  3. What drives degradation
  4. The pack is the barrier
  5. A stability protocol for the ingredient
  6. The finished formula changes the answer
  7. How the shelf life is set

PQQ disodium is sensitive to light and moisture, and heat accelerates both. The powder is most stable in a sealed, light-resistant pack at controlled humidity; an aqueous solution is the least stable format. Shelf life is assigned from stability data for the exact pack and storage condition, not from the certificate.

In one line

Light and moisture are the two variables the pack controls; the shelf life is only as good as the seal, the liner and the storage condition behind it.

The powder: moisture, light and colour

The catalog sets loss on drying at ≤5.0%. That limit is a release gate, not a storage allowance. Once the foil pouch is opened, the powder can pick up moisture from the air; the loss on drying rises, the as-is assay falls, and the colour can shift. A tight seal and a dry store are part of the specification in practice, even when they are not printed on the certificate.

Light is the second driver. PQQ is photolabile, and a clear container on a windowsill or a bench is an exposure. The powder should stay in its original light-resistant pouch, or in an opaque container that closes properly. A transparent jar is not a storage container for this material, however convenient it looks.

Heat raises the rate of both moisture and light damage. Ambient warehouse temperatures are usually acceptable for the sealed pack; a hot loading bay, a car boot or a greenhouse is not. The pack should be allowed to equilibrate before opening after cold storage, so that condensation does not form on the powder.

The solution: the least stable format

The disodium salt dissolves in water to give a reddish-brown solution. In solution, light, oxygen, heat and pH act at the same time. A ready-to-drink process adds a heat load through pasteurisation or hot fill; a powder stick avoids that step because the consumer adds water at the point of use.

If a liquid is unavoidable, protect it from light, control the pH, keep dissolved oxygen low, and validate the hold time before filling. A bulk-powder stability result does not transfer to a beverage. The matrix, the process and the pack each change the rate, and the drink's shelf life has to be measured in the drink.

What drives degradation

Factors that move PQQ disodium during storage
FactorWhat it doesControl
LightPhotodegradation; colour and assay changeOpaque or foil pack; dark store
MoistureRaises loss on drying; dilutes the as-is assaySealed pouch; desiccant where needed
HeatAccelerates light and moisture damageControlled store; cool process
OxygenOxidation in solution and at exposed surfacesLow headspace; sealed pack; process control
pHChanges solution stability and colourValidate the matrix pH; buffer if needed
Metal ionsColour and complexation in solutionAvoid iron and copper contact

These factors are not independent. A warm, bright, humid store is worse than the sum of three separate effects, and a solution at neutral pH in clear glass combines all of them. The useful stability question is not “is PQQ stable?” but “stable in which pack, at which condition, for how long?”

The pack is the barrier

The standard pack is a 1 kg foil pouch. The foil is the light and moisture barrier; the seal is the weak point. A pouch that has been opened and folded over is not resealed in the same sense as a heat-sealed pack, and the headspace now contains humid air. For a long storage period, transfer the remainder to a smaller opaque container or use the pouch within the stated in-use period.

The 25 kg fiber drum is the bulk pack. A fiber drum relies on its inner liner for the moisture barrier; keep the liner closed, keep the drum off a concrete floor in a humid store, and record the date of opening. The lot code on the drum, the liner and the certificate should match.

For repacking, use a light-resistant, moisture-barrier container and keep the lot identity. A desiccant can help in a humid environment, but it is not a substitute for a seal. If the application needs a modified atmosphere, specify it; nitrogen flushing is not implied by the standard pack.

A stability protocol for the ingredient

A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm, following the standard photostability design, covers the failure mode that a dark incubator misses.

Test assay, loss on drying, appearance, UV identity and microbiology at each point. For a beverage or a stick pack, repeat the work in the matrix and at the process pH and heat load. The report should show the individual results, not only a pass statement, and it should identify the pack and the lot family.

Ask for the stability summary for the pack you will buy, not for a different pack from the same product family. A 25 kg drum and a 1 kg pouch have different surface-to-volume ratios, different headspace and different opening histories; the data belongs to the pack.

The finished formula changes the answer

A PQQ capsule or tablet starts with low water activity, yet the shell and the excipients can still move moisture into the fill, so loss on drying is checked at release and again after storage, alongside the appearance of the powder. A stick pack fails at the seal: a pinhole in the foil is enough, and the strip is inspected as well as the powder. Neither format inherits the shelf life of the bulk pouch.

A beverage combines light, pH, heat and oxygen. The ingredient's bulk stability is the starting point, not the answer. The formulator decides whether an overage is needed; that is a label and stability decision, and it does not repair a pack that lets moisture in.

How the shelf life is set

We do not publish a single shelf-life number for PQQ disodium, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim.

After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the HPLC note describes the assay; the quality page describes the release workflow.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation