Policosanol vs octacosanol: the mixture against the single alcohol
Policosanol and octacosanol are not two grades of the same specification. Policosanol is a mixture of long-chain primary alcohols, usually C24–C34, in which octacosanol is the largest single alcohol in the catalog grade; octacosanol is a single C28 alcohol with CAS 557-61-9, formula C28H58O and molecular weight 410.76. The catalog carries the octacosanol CAS because that is the alcohol the specification names; the mixture itself is registered as 142583-61-7, and the two numbers identify different things.
Policosanol is a mixture specified by its alcohol profile; octacosanol is one molecule specified by its own CAS, formula and purity, and the two are not interchangeable on a label.
What policosanol is
Policosanol is a family of primary aliphatic alcohols, mostly even-numbered, recovered from a wax. The catalog specification is a total of at least 90% by GC, with octacosanol at a share of at least 60%. Those two numbers describe a concentrate: the alcohol fraction is the majority of the powder, and octacosanol is the majority of that fraction. They do not describe a single substance, and they do not make the powder a diluted octacosanol.
The source decides the rest of the profile. Sugarcane wax, rice bran wax and beeswax give different proportions of C26, C28, C30 and the C32–C34 tail, and the refining sequence decides how much wax ester, hydrocarbon and soap remains. A certificate that names only octacosanol has described one peak of a mixture and has left the specification incomplete.
The two materials side by side
| Property | Policosanol | Octacosanol |
|---|---|---|
| CAS number | 142583-61-7 (mixture); certificates often also carry 557-61-9 for the octacosanol component | 557-61-9 |
| Formula | No single formula; C28H58O is the octacosanol component | C28H58O |
| Molecular weight | No single value; the octacosanol component is 410.76 | 410.76 |
| Composition | C24–C34 alcohols; octacosanol at ≥60% share | One alcohol |
| Assay | Sum of alcohol peaks by GC; ≥90% total | Single peak by GC |
| Melting point | 78–82 °C | Higher and narrower |
| Label name | Policosanol, usually with the source | Octacosanol |
| Source | Sugarcane, rice bran or beeswax | Isolated from an octacosanol-rich wax fraction |
The table is a specification comparison, not a ranking. A higher octacosanol figure is not automatically the right purchase if the label and the formula call for the mixture; a mixture is not automatically the right purchase if the label names the single alcohol.
Two assays, two questions
The policosanol assay sums the alcohol peaks and reports the total. The octacosanol assay measures one peak and reports its purity. Both use GC with flame-ionisation detection and both need reference standards, but the number means something different in each case. A policosanol total of 90% says that the identified alcohols are 90% of the powder. An octacosanol purity of 90% says that the single alcohol is 90% of the powder. The first number includes the second; the second says nothing about the other alcohols.
Read the octacosanol share on a policosanol certificate carefully. A 90% total with a 60% share of the total is 54% octacosanol by mass; a 60% share of the powder is 60%. The certificate should state the basis, and the buyer should compare quotations on the same basis. A policosanol certificate that reports “octacosanol 60%” without the total and the basis has not given a specification.
The methods also differ in what they can detect. A single-peak octacosanol assay is a purity test and will show other alcohols as impurities if the method resolves them. A policosanol total is a composition test, and it will show a missing C26 or C30 peak that a single-peak assay would not look for. The method should match the question being asked.
The melting range tells the mixture apart
The policosanol mixture melts over 78–82 °C. The range is wide because the mixture contains several alcohols with different chain lengths; a pure alcohol melts at a higher, narrower point. That difference is useful in identity work: a lot that melts like a pure compound but is sold as a mixture should be checked for spiking, and a mixture that melts at the lower edge may carry more C26 or C30, or residual esters and soaps.
The melting point is a fingerprint, not a composition assay. It cannot tell a sugarcane profile from a rice bran profile on its own, and it cannot measure the octacosanol share. It can confirm that the solid is consistent with the profile, and it can flag a lot that has been diluted or spiked. For a disputed lot, read it beside the full GC profile, not instead of it.
The melt step in processing follows the same numbers. The mixture softens and melts below 82 °C; the single alcohol needs a higher temperature and gives a narrower window. A formulator switching from one to the other should recheck the heating step, the hold time and the cooling profile, because the physical form of the solidified material will differ.
What the label has to name
“Policosanol” and “octacosanol” are different ingredient names. A product made from the mixture should declare policosanol, with the source where the market or the customer requires it. A product made from the single alcohol should declare octacosanol. If the label names the single alcohol and the drum holds the mixture, the label is wrong even when the octacosanol figure matches, because the declared substance is not the substance being weighed.
The quantity has to follow the same logic. If a formula is built to deliver 20 mg of octacosanol, a policosanol lot at 54% octacosanol by mass needs 37.0 mg of powder, while a lot at 60% needs 33.3 mg. Those are label arithmetic, not a dose recommendation. The certificate's basis, the label's declared ingredient and the weigh-up should all use the same figure.
The lipid story is claim-sensitive, and the ingredient name is part of the claim review. The compliance page sets out the documents and the route question; the label wording is reviewed by the buyer's regulatory team for the destination.
When to choose which
Choose policosanol when the ingredient is the mixture, when the source profile is part of the specification, and when the label names policosanol. It is the material with the natural alcohol distribution and the longer compositional file. Choose octacosanol when the label and the specification name the single alcohol, and when the buyer wants a single-peak purity figure instead of a profile.
Neither is a drop-in for the other. The mass per serving, the label name, the melt step and the regulatory file all change with the switch. A buyer who needs the mixture should not accept the single alcohol as “the same thing at a higher percentage”, and a buyer who needs the single alcohol should not accept the mixture and adjust the number afterwards.
The catalog values are on the policosanol product page; the grades page widens the view to the three sources; the COA page shows how the total and the share are reported. The gamma-oryzanol page covers the rice bran ester stream, a different product; the methods library describes the GC separation.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation