05 Compliance

The regulatory file for policosanol

Technical document 05 · Reviewed 2026-11-19 · Policosanol

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and limits
  5. Claims and the label
  6. The document set
  7. Checklist before the first order

Policosanol is supplied as a mixture of long-chain primary alcohols, with the source named on the specification. The catalog specification is where the file starts; the route is then built around the source, the profile, the destination and the finished product. The buyer's regulatory team confirms that route. The page lists the documents and checks the file needs; it makes no claim that the material is authorised in any market.

In one line

The specification describes the mixture; the regulatory file shows the route, the limits and the label for the destination, and the lipid story is reviewed by the buyer's regulatory team.

What the file contains

Four practical questions sit behind a complete file. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? What limits and label rules govern the finished product? And what changes if the source, the process or the pack changes? The COA covers the lot, the TDS covers the specification, and the SDS covers handling. No single one of them settles the route.

The file should also contain the source statement, the allergen and GMO statements, the origin record, the residual-solvent statement and any customer-specific declaration. If a statement is missing for the lot, say so before the order rather than at the port. A versioned document list beats a folder of undated PDFs.

European Union

The EU framework is general food law (Regulation (EC) No 178/2002), food information to consumers (Regulation (EU) No 1169/2011), contaminants (Regulation (EU) 2023/915) and food supplements (Directive 2002/46/EC). Those instruments sit alongside any product-specific route. Whether policosanol needs such a route depends on the source, the process and the market history of the exact material, and the position may not be the same for a sugarcane concentrate, a rice bran concentrate and a beeswax-derived alcohol mixture.

Some markets have a product-specific entry for this form; confirm the current text and conditions rather than assuming that an entry exists or that it covers the source in hand. The file should name the source and the specification version, because a route that covers one profile does not automatically cover another. As of this review, the current consolidated text is the reference, not a summary.

United States

For the US, the file turns on what the dietary ingredient or food substance is and how it will be used. The supplier should identify the basis and the document behind it; the buyer checks that it covers the finished product and the claim. The Supplement Facts panel, the ingredient name and the claim are reviewed apart from the certificate; a compliant lot can still fail the label review.

Current good manufacturing practice for dietary supplements (21 CFR 111) applies to the finished product, not to the drum alone. The buyer's quality team should confirm that the supplier's certificate, the identity test and the label all describe the same material. The US route is not asserted here; the buyer's regulatory team confirms it for the destination and the finished product.

Contaminants and limits

Contaminants are calculated on the finished product, not only measured in the drum. The table below gives the catalog limits for the ingredient and the evidence the file should carry. The destination text and the daily dose set the final limit; a lot that passes the ingredient gate can still exceed the finished-product limit once the dose is applied.

Catalog limits and the evidence the file should carry
ParameterCatalog limit (ingredient)What the file should show
Lead (Pb)≤3 mg/kgMeasured value, method and the calculation at the finished dose
Arsenic (As)≤2 mg/kgMeasured value, method and the destination limit
Cadmium (Cd)≤1 mg/kgMeasured value and any category exception
Mercury (Hg)≤0.1 mg/kgMeasured value and method
Moisture≤1.0%Measured percentage on the lot COA
MicrobiologyAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absentCounts and absence statement

Each heavy metal needs its own line. A single “heavy metals” total hides the element that matters, and a “not detected” line without a detection limit is evidence about the method, not about the sample. The moisture figure should be read with the total policosanol result: a high moisture lot can pass the alcohol sum on a dry basis and still deliver less material per gram.

Claims and the label

The lipid story is claim-sensitive. Policosanol has been discussed in connection with lipid-related health claims, and that is exactly the area where a label wording can move from a permitted statement to a disease claim with a small change of language. No lipid-related health claim is made on this page, in the specification or on the certificate. The buyer's regulatory team reviews the wording for the destination, the dose and the finished product.

In the EU, nutrition and health claims are governed by Regulation (EC) No 1924/2006 and the associated lists; a claim that is not on the permitted list is not made permissible by the ingredient's history. Under DSHEA, structure-function wording and disease wording are treated differently; the label and the claim are reviewed apart from the certificate. The supplier can provide the specification and the lot data; the claim decision belongs to the brand and its reviewer.

The label also has to name the material correctly. “Policosanol” and “octacosanol” are different ingredient names, and the declared quantity has to match the material and the profile. If the label names the single alcohol and the drum holds the mixture, the label is wrong even when the octacosanol figure matches.

The document set

Documents in a policosanol regulatory file
DocumentWhat it showsWhen needed
Specification / TDSSource, alcohol profile and release limitsEvery quotation and every market file
COALot results against the specificationEvery lot
SDSHandling, storage and transport informationEvery shipment
Source statementSugarcane, rice bran or beeswaxEvery market file
Allergen and GMO statementStatus of the source and the processWhere the destination or the customer requires it
Residual-solvent statementSolvents used in refiningWhere ethanol, hexane or another solvent is used
Change-control recordSource, process or pack changesBefore the first affected shipment

Checklist before the first order

  • Specification version, source and the exact alcohol profile are named.
  • COA, TDS, SDS, source, allergen, GMO, origin and residual-solvent statements are on file.
  • Contaminant figures are recalculated at the finished-product dose.
  • Label and claim have been checked for the destination.
  • The source, process and pack are under change control.
  • Quotation, specification and certificate carry the same version.

The catalog values are on the policosanol product page; the COA page explains the lot certificate; the identity page covers the analytical evidence. The quality page describes the release file, and the EU regulatory note sets out the framework.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation