01 COA & batch testing

What the COA for nicotinamide riboside chloride actually contains

Technical document 01 · Reviewed 2026-11-19 · Nicotinamide Riboside

On this page
  1. Reading the certificate as a report
  2. Assay, chloride and the salt basis
  3. Limit and result are different columns
  4. Batch-to-batch drift
  5. When an outside laboratory is needed
  6. A supplier comparison

A nicotinamide riboside chloride certificate is a test report for one lot: appearance, two identification tests, an HPLC assay, chloride, water and the contaminant panels. The catalog limits below are the gates; the batch COA records what the laboratory measured against them. Read the form line before the assay, because a high percentage on the wrong salt is still the wrong material.

In one line

The certificate has to prove the salt as well as the nucleoside: an HPLC assay beside the chloride figure, the NMR identity and the water result.

Reading the certificate as a report

A COA row should be readable without a phone call. It needs the parameter, the technique that produced the number, the limit the lot had to meet and the result itself. When a supplier prints only “conforms”, the buyer has been handed a verdict with no working.

The HPLC row places the nucleoside at the reference retention time and supplies a UV spectrum; the NMR row shows the nicotinamide ring and the ribose anomeric signal. Neither is a purity test, and a certificate that merges them has collapsed two separate questions into a single line.

Identity, assay, chloride and moisture · nicotinamide riboside chloride
ParameterMethodRelease limit
AppearanceVisualWhite to off-white powder
IdentificationHPLC retention and UV spectrumConforms to the reference
Identification1H NMRConforms to the nicotinamide riboside structure
AssayHPLC with UV detection98.0–102.0%
ChlorideIon chromatography or potentiometric titration12.0–13.0%
WaterKarl Fischer≤2.0%
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent

Assay, chloride and the salt basis

Nicotinamide riboside chloride has the formula C11H15ClN2O5 and a molecular weight of 290.70. The chloride accounts for 35.45 of those mass units, or 12.19% at full stoichiometry, which is why the catalog window of 12.0–13.0% can be predicted before a sample is weighed. By the same arithmetic, about 87.5% of the salt is the nicotinamide riboside moiety; a 98.0–102.0% HPLC assay describes the salt, not the free base and not the nucleoside alone.

That makes chloride the most direct evidence of the counter-ion. A result inside the window agrees with the chloride form. A figure below it suggests free base, a carrier or a different anion; a figure above it suggests residual chloride from the process. The technique belongs beside the number: ion chromatography and titration see different interferences.

Water is capped at ≤2.0% by Karl Fischer, a tight gate for a solid that pulls moisture from the air. The COA should say whether the assay was calculated as-is or on the dried basis. With water held under 2.0% the gap is small, but a lot close to the cap has little room left for a humid warehouse.

NMR carries the structural identity: the nicotinamide ring and the ribose anomeric proton. A retention time can be matched by a related nicotinamide, so the spectrum is the second dimension. Ask for the spectrum and the chromatogram rather than accepting a conformity statement.

Limit and result are different columns

Two columns are doing different jobs. The release limit tells the laboratory where to draw the line; the result tells the buyer what the powder actually was. A range in both columns yields a document that can neither fail nor inform.

What the result column should contain
ParameterRelease limitResult column
Assay98.0–102.0% by HPLCA measured percentage, with the basis and the method
Chloride12.0–13.0%A measured percentage and the technique used
Water≤2.0% by Karl FischerA measured percentage
Heavy metalsPer elementA measured figure in mg/kg for each element
MicrobiologyCounts and absenceThe count and the absence statement for the lot
AppearanceWhite to off-whiteA description of the lot as received

Pass or fail is a summary, not the evidence. The evidence for metals is one figure per element; a total hides the element that matters. For microbiology it is a plate count plus an absence statement. The lot code, the pack and the test date should also appear, so the result can be tied to a drum.

Batch-to-batch drift

Water and chloride are the two numbers most likely to drift. Drying and packing set the water; salt stoichiometry and isolation set the chloride. A value at the edge of either window deserves a look at the batch record before it becomes a rejection.

Colour is a coarse line but a useful one. White to off-white leaves space for normal variation, yet a yellow or brown tint can follow heat exposure or a rising related-substance peak while the assay still passes. Three or four consecutive lots are more informative than one: water climbing across deliveries, or a new shoulder on the main peak, warrants a check.

Assay itself is method-dependent. A one-point shift between two laboratories can come from the standard, the integration or the sample preparation rather than the lot. The certificate should name the column, the mobile phase, the wavelength and the reference standard so the number can be reproduced.

When an outside laboratory is needed

Independent testing earns its cost in four situations: a new source, a first shipment into a regulated market, a salt claim the supplier's paperwork does not support, or a contested result. The panel should not simply repeat the supplier's COA. It should combine HPLC with a diode array for identity and assay, 1H NMR for structure, chloride by ion chromatography, Karl Fischer for water, ICP-MS for the metals and a plate count for microbiology, all on one sample.

Ask the laboratory for its detection and quantification limits. A “not detected” entry without a limit says more about the method than about the sample. Confirm ISO/IEC 17025 accreditation for each test, and keep the chromatogram and spectrum with the report.

Chain of custody is part of the evidence. The material tested should be the material retained, and the report should name the lot. If a result is disputed, hand the referee the retained sample, the supplier's certificate and the specification, and ask for the tests that distinguish the salt from the free base rather than another run of the same assay.

A supplier comparison

A side-by-side review should cover six items: form and CAS number; assay result and basis; chloride result; water by Karl Fischer; heavy metals and microbiology; pack size and lot code. Two offers that match on assay but differ on chloride or water are not the same powder.

Traceability is the second layer: who made the lot, by which process, and with which drying and packing steps. The catalog ranges sit on the nicotinamide riboside product page. The tests that separate the salt from the free base are on the identity page; the chromatographic method is described in the HPLC method note. NMN is a different molecule with its own certificate requirements, covered on the NMN product page, and the dinucleotide form is on the NAD page. The release workflow is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation