How we prove a β-NAD lot is the named dinucleotide
A β-NAD lot is only identified when four independent observations agree. The document must name β-nicotinamide adenine dinucleotide, CAS 53-84-9, C21H27N7O14P2 and molecular weight 663.43. HPLC retention and the UV spectrum must show the dinucleotide, the 340 nm region must exclude NADH, and Karl Fischer water must close the mass balance. The assay percentage alone cannot separate β-NAD from NADH, NMN or a diluted powder.
Four independent observations have to agree before a lot is β-NAD: the document, the chromatogram, the 340 nm region and the water result.
Four questions, four kinds of evidence
Identity is easier to audit when it is split into separate questions.
| Evidence | What it establishes | Test | What it cannot show |
|---|---|---|---|
| Document | The name, form and CAS number | Name, CAS, formula, molecular weight | The powder itself |
| Chromatogram | The dinucleotide at a retention time | HPLC retention and UV spectrum | The oxidation state |
| 340 nm region | Oxidised or reduced form | Absorbance, or dual-wavelength HPLC | Purity |
| Mass balance | Water and dilution | Assay, Karl Fischer, impurity peaks | Identity |
A retention time without a spectrum is half an identification. An assay without water cannot be converted between bases. Water without assay cannot show what the rest of the powder consists of.
The 340/260 ratio and the oxidation state
NAD+ absorbs near 259 nm and has no 340 nm band. NADH has the 259 nm band and a 340 nm band from the reduced ring. The 340/260 ratio is therefore an oxidation-state measurement.
A β-NAD lot should sit near zero. A distinct 340 nm band means NADH is present. In HPLC, a 340 nm detector sees only the reduced form; a 260 nm detector sees both. If the method does not separate them, the 260 nm result is a sum.
The ratio is not a purity test. A 340-absorbing impurity adds to it, and dilution can preserve it. Use it with the chromatogram, assay and water.
What XRD can and cannot show
XRD asks whether the solid is crystalline and whether the pattern matches a reference. A freeze-dried or spray-dried nucleotide may be amorphous or partly crystalline, depending on isolation and drying. The pattern is therefore a process fingerprint and a way to spot a crystalline diluent, not a stand-alone identity test.
Request the reference pattern, the preparation and the detection limit. XRD says nothing about water content or the salt form, and it cannot distinguish two amorphous solids. In a dispute, the chromatogram, the 340/260 ratio and the mass balance carry more weight.
How substitution shows up
| Adulterant | Effect | Signal | Test |
|---|---|---|---|
| NADH | Adds the reduced form | 340 nm band; different retention | UV, dual-wavelength HPLC |
| NMN or nicotinamide riboside | Adds another nicotinamide form | Extra or shifted peak; different UV | HPLC, mass spectrometry |
| Niacinamide | Adds a small, early-eluting molecule | Early peak; lower assay | HPLC |
| AMP or ADP | Adds related nucleotides | Extra peaks near the main peak | HPLC, mass spectrometry |
| Diluent | Lowers the assay | Low assay; balance mismatch | Assay, Karl Fischer, impurity profile |
Appearance is the weakest evidence: white to off-white covers a wide range, and a blend can be coloured to match. The 340/260 ratio, the chromatographic profile and the mass balance are harder to fake. A certificate that stops at appearance and assay has skipped the tests that would catch the likely substitution.
Identity clauses for the specification
- “β-Nicotinamide adenine dinucleotide (NAD+), CAS 53-84-9, C21H27N7O14P2, molecular weight 663.43.”
- “Assay ≥95.0% by HPLC, with the basis and the detection wavelength stated.”
- “Identification by HPLC retention and UV spectrum; report the spectrum, not only the retention time.”
- “Report absorbance at 340 nm; a clear 340 nm band is a deviation to investigate.”
- “Water ≤5.0% by Karl Fischer; pH 2.0–4.0 in a 1% solution.”
- “No unspecified impurity above the agreed limit; report the chromatogram.”
- “Form, destination market and pack confirmed before the order.”
Questions that produce evidence
- Which CAS number appears on the certificate, and is the ingredient named as β-NAD rather than NADH?
- Will the chromatogram and UV spectrum accompany the assay figure?
- What absorbance does the lot give at 340 nm, and how was the 340/260 ratio derived?
- What is the Karl Fischer water for this lot, and on which basis is the assay reported?
- If a result is contested, will you re-test the retained sample jointly?
Answers to those five questions are an identity file; a lone assay percentage is not. Catalog values are on the product hub. The COA page shows where each result appears on a lot certificate, and the grades page compares powder with granulate. The level-four comparison covers the oxidation states, and the HPLC method note explains the separation.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation