NAD+ vs NADH: oxidation state, assay and stability
NAD+ and NADH are the oxidised and reduced forms of the same coenzyme pair: NAD+ carries an aromatic pyridinium ring, NADH a 1,4-dihydropyridine ring, and the two interconvert by two electrons and a proton. They are separate materials with separate CAS numbers — 53-84-9 and 606-68-8 — and separate assays and specifications. A purchase order or a label that says only “NAD” has not named the ingredient.
NAD+ and NADH are one hydride apart, and that one step changes the CAS number, the wavelength the assay reads and what the powder does in air and water.
The difference is one hydride
The change sits on the nicotinamide ring. In NAD+ the ring is a pyridinium cation; in NADH the same ring is a 1,4-dihydropyridine. The pair interconverts by two electrons and one proton, which is the hydride transfer that dehydrogenase enzymes catalyse. Everything else in the molecule — the adenine, the two riboses and the pyrophosphate bridge — is unchanged.
A two-electron change is enough to create a separate material with its own CAS number and certificate. The oxidised free acid has a molecular weight of 663.43; the reduced free acid is about two mass units heavier. Commercial NADH is usually supplied as a salt, so its CAS number, formula and molecular weight belong to the form named on its own certificate, not to a generic “NADH” label.
NAD+ and NADH side by side
| Property | NAD+ | NADH |
|---|---|---|
| CAS number | 53-84-9 | 606-68-8 |
| Oxidation state | Oxidised | Reduced |
| Nicotinamide ring | Pyridinium | 1,4-Dihydropyridine |
| Ultraviolet bands | About 259 nm; no 340 nm band | About 259 nm and 340 nm |
| Usual assay wavelength | 260 nm | 340 nm, or 260 and 340 nm |
| Catalog assay | ≥95.0% by HPLC | Separate specification |
| Water and pH | ≤5.0% Karl Fischer; pH 2.0–4.0 at 1% | Separate specification |
| Main solution risk | Hydrolysis, driven by heat and pH | Oxidation back to NAD+ |
The table is not a conversion chart. It separates two materials that share a name stem and a biological role, and it shows why a single “NAD” line on a purchase order or a label is incomplete.
The wavelength decides what is counted
NAD+ is read at about 259–260 nm; NADH has the same 259 nm band plus a 340 nm band, where only the reduced ring absorbs. An HPLC method for NAD+ therefore uses 260 nm, and a method for NADH uses 340 nm or a dual-wavelength arrangement. A 260 nm method that does not separate the two forms reports the sum of both, so a lot can pass a ≥95.0% assay while carrying NADH.
A reader needs the column and mobile phase, the detection wavelength and the reference standard; the chromatogram should show the separation. The assay basis — as-is or anhydrous — is a second, independent statement that belongs beside the percentage, because water moves the as-is figure without changing the chemistry.
An enzymatic assay answers a different question: it measures coenzyme activity in a dehydrogenase reaction rather than ultraviolet peak area. It can be useful when the question is activity rather than peak purity, but it does not replace the identity evidence and it does not assign a specification on its own.
Stability follows the oxidation state
NAD+ is hygroscopic and heat-sensitive; in water it hydrolyses, and the rate rises with temperature, while a move toward neutral or alkaline pH usually increases it. The catalog's 1% solution is acidic at pH 2.0–4.0, which is a handling clue rather than a licence to hold a neutral or alkaline solution. The dry powder, sealed and cool, is the format with the longest working life.
NADH has its own failure mode. In solution it is oxidised back to NAD+ by dissolved oxygen, and trace metal ions and light accelerate the reaction. An NADH solution open to air therefore drifts toward the oxidised form; an NAD+ solution does not become NADH without a reductant. Both forms are hygroscopic solids, so the pack matters on both sides.
The two forms should not share a stability conclusion. A study run on the oxidised powder does not cover the reduced form, and a study run in one matrix does not cover another. The stability page describes the study design in more detail.
What the label and the file have to say
The label has to name the form. “β-Nicotinamide adenine dinucleotide (NAD+)” and “reduced β-nicotinamide adenine dinucleotide (NADH)” are different ingredient names; “NAD” alone is ambiguous and leaves the reviewer to guess which oxidation state was weighed. The finished-product dose and the assay basis should be stated in the units the specification uses.
A market file written around one form does not automatically cover the other. The buyer's regulatory team confirms the route for the destination and checks that the form on the label is the form the file covers. This page does not assert an authorisation for either form in any market.
When to choose which form
Choose NAD+ when the specification, the label and the market file name the oxidised form and the format is dry. It is the form in the catalog here: white to off-white powder with an assay of ≥95.0% by HPLC, water ≤5.0% and pH 2.0–4.0. Choose NADH only when the formula and the file name the reduced form, and buy it against its own certificate with its own assay method.
Do not switch forms to chase an assay number, to match a quotation that is already on the table, or to make a label conversion easier. A switch changes the CAS number, the UV method, the stability risks and the regulatory citation at the same time. If a switch is required, write it as a change control with a new specification, a new certificate and a new label review.
NAD+ is also not NMN or nicotinamide riboside. Those are different molecules with different molecular weights and their own specifications; the NMN page and the nicotinamide riboside page describe them. Catalog values sit on the product hub. The grades page puts the two forms in the context of pack choice, the COA page lists what a lot is released against, and the quality page explains the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation