03 Stability

β-NAD stability: hygroscopic powder, degrading solution

Technical document 03 · Reviewed 2026-11-19 · NAD+

On this page
  1. The solid: water uptake before chemistry
  2. The solution: hydrolysis with a pH dependence
  3. Six drivers of loss
  4. Designing the study
  5. How the dosage form changes exposure
  6. Assigning a retest period

β-NAD presents two separate keeping problems. The solid is hygroscopic: it takes water from the air, and the as-is assay falls before any bond breaks. The dissolved molecule is hydrolytically unstable: water, heat and pH shorten its life, and a drink is the least forgiving format. The powder in a sealed foil pack therefore has the longest working life, and shelf life has to be assigned to that pack and its storage condition.

In one line

The solid fails by taking up water; the solution fails by hydrolysing; the pack and the storage condition decide how much time you get.

The solid: water uptake before chemistry

The Karl Fischer figure is the first thing to watch. The catalog allows ≤5.0%, but that is a release limit, not permission to keep the pouch open. A pouch that has been opened and folded shut is not sealed; its headspace exchanges with the room, and the next water test will show the result. Caking and loss of flow follow.

Heat accelerates the same decline. Ordinary warehouse temperatures are usually tolerable in a sealed pack; a hot loading bay, a parked car or a shelf above a heater is not. If a pack has been cold, let it reach room temperature before opening, or condensation will form on the powder.

Colour is a weak but useful indicator. White to off-white is the catalog description. A yellow tint or dark specks after storage is a reason to re-test, not a reason to argue from a photograph.

The solution: hydrolysis with a pH dependence

Dissolved NAD+ hydrolyses, and the rate rises with temperature. pH is the second lever: the catalog's 1% solution is acidic at 2.0–4.0, and moving a formula toward neutral or alkaline usually shortens the hold time. A pasteurisation or hot-fill step adds a stress that a powder stick never sees.

NADH in solution has the opposite problem: oxygen oxidises it back to NAD+. Trace metals and light accelerate that oxidation, so a reduced-form liquid needs a deoxygenated, protected process and its own hold-time data.

If a liquid is the only option, manage light, pH and dissolved oxygen, then measure the hold time in the real matrix. Powder data cannot be borrowed for a beverage.

Six drivers of loss

Factors that move β-NAD during storage
DriverFailure modeControl
WaterHygroscopic gain; as-is assay falls; cakingSealed foil; desiccant if needed
HeatFaster hydrolysis; faster moisture damageCool storage; no hot hold
pHHydrolysis rate in solutionValidate the matrix pH
OxygenNADH oxidised to NAD+Low headspace; deoxygenation
LightDegradation at exposed surfacesOpaque pack; dark store
Trace metalsCatalysis of NADH oxidationAvoid iron and copper contact

These drivers reinforce one another. A warm, wet, brightly lit store compounds the damage rather than adding three separate penalties; a neutral solution in clear glass exposes the material to most of them at once. Stability is a property of a pack, a condition and a time, not of the molecule alone.

Designing the study

Build the study around the pack and the matrix that will be sold. For bulk powder, use 25 °C/60% relative humidity and 30 °C/65% relative humidity for the long-term and intermediate points, and 40 °C/75% relative humidity for the accelerated arm. Add a light-exposure arm; a dark incubator cannot see a photolytic pathway.

At each point measure assay, Karl Fischer water, pH, appearance, UV identity and microbiology. For NADH, add a 340 nm reading so that the oxidation state is measured rather than assumed. For a stick or a drink, repeat the panel in the matrix and at the process heat load.

Give the individual results rather than a single verdict, and name the pack and the lots covered. A study on a different pack does not answer the question for the pack being purchased.

How the dosage form changes exposure

Capsules and tablets limit water activity but do not stop moisture transfer from the shell or the excipients. Test water and appearance at release and again after storage. A stick pack adds a seal to the problem: inspect the strip for pinholes, because the foil is the barrier.

A beverage exposes the molecule to water, pH, oxygen, heat and light at once. Bulk data cannot answer the beverage question on its own. An overage is a formulation choice; it does not fix a leaking pack.

Assigning a retest period

There is no universal shelf-life figure for β-NAD. The retest period is a property of the pack, the storage condition and the test panel, and it should be written into the specification with that support behind it.

At the end of the retest period, test the retained sample again before extending use. Do not extend by default, and do not apply a drum figure to a repacked pouch.

Pack sizes are set out on the product hub. Release testing is explained on the COA page, ordering on the MOQ page, the assay itself in the HPLC method note, and the release file on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation