What the COA for β-NAD actually contains
Seven release parameters sit on a β-NAD certificate: appearance, HPLC/UV identification, assay, Karl Fischer water, pH of a 1% solution, the heavy-metal panel and microbiology. Only identification and assay describe the molecule itself; water and pH describe the condition of the powder around it. A buyer who reads only the assay percentage is missing the two numbers that decide what that percentage means.
A β-NAD certificate is only complete when the assay carries its basis and wavelength, and the Karl Fischer water sits beside it.
What each line has to show
Each line should let a reviewer reconstruct the release decision: what was measured, how, against which limit, and what the lot actually gave. “Conforms” alone is a verdict without a record behind it.
Identification and assay are separate claims. Identification says the peak is the β-linked dinucleotide. Assay says how much of it the lot contains. A certificate that reports one and implies the other has left a gap.
| Parameter | Method | Release limit |
|---|---|---|
| Appearance | Visual | White to off-white powder |
| Identification | HPLC retention and UV spectrum | Matches the reference standard |
| Assay | HPLC | ≥95.0% |
| Water | Karl Fischer titration | ≤5.0% |
| pH (1% solution) | pH meter | 2.0–4.0 |
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
The UV spectrum is what turns a retention time into an identification. The assay is a number whose meaning depends on two footnotes: the basis it is reported on and the wavelength that produced it.
As-is, anhydrous and the detection wavelength
The assay percentage needs a denominator. On the anhydrous basis, the laboratory divides the measured amount by the dry matter; as-is, it reports the powder as weighed. Take a lot at 95.0% as-is with 4.0% water: the anhydrous figure is about 99.0%. Take a lot at 95.0% anhydrous with the full 5.0% water: as-is it is about 90.3%.
Karl Fischer is the water-specific test. Loss on drying would also count residual solvent, which matters for a hygroscopic nucleotide that may carry solvent from its isolation. The catalog limit is water ≤5.0% by Karl Fischer, and the measured number should be printed rather than summarised as “pass”.
Detection wavelength is the other footnote. NAD+ has its maximum near 259 nm; NADH adds a band at 340 nm. A 260 nm channel with no separation between the two forms measures both together. The chromatogram should show that the oxidation states elute apart.
Limit, result and the space between them
A limit is a gate; a result is an observation. Put them in different columns and name the method above them. A result column that repeats the specification range tells the reader nothing about the lot.
| Parameter | Release limit | Result column |
|---|---|---|
| Assay | ≥95.0% | A measured percentage, with the basis and the wavelength |
| Water | ≤5.0% | A measured percentage by Karl Fischer |
| pH | 2.0–4.0 at 1% | The measured pH and the solution concentration |
| Heavy metals | Per element | Each element reported separately in mg/kg |
| Microbiology | Counts and absence | Plate count plus the absence statement for the lot |
Reconstruct the decision: assay with basis and wavelength, water beside it, each metal separately, and a count plus an absence statement for micro. A summed heavy-metal figure conceals which element drove the total.
Batch-to-batch movement
Lots move for process reasons. The conversion route and the purification change colour and assay; the drying step changes water; the isolation and neutralisation change pH. White to off-white is a broad window, so a slight shade difference is not automatically a defect. A yellow cast, dark particles or patchy colour deserve the batch record.
Water is the variable most exposed to the warehouse. It rises when a pouch is left open, and the as-is assay falls in step. A pH at the edge of 2.0–4.0 can mean residual acid from the isolation step or a different neutralisation.
One result near a limit is less informative than a trend. Match the certificate lot code to the pouch, the drum and the retained sample before treating the paper as evidence about the pack in front of you.
When the supplier certificate is not enough
Outside testing earns its place at a new source, a first regulated shipment, a disputed oxidation state, or a label statement the supplier's certificate does not support. Ask for a focused panel: HPLC/UV at 260 and 340 nm, Karl Fischer water, pH, ICP-MS metals and the micro set.
The 340 nm channel is the oxidation-state check. A β-NAD lot with a distinct 340 nm band contains NADH. If the structure itself is contested, NMR or high-resolution mass spectrometry comes next. An enzymatic assay measures coenzyme activity, which is a different question from peak area.
Insist on a detection limit for every screen and on a documented chain of custody. “Not detected” without a limit says something about the method, not the lot.
Six lines for a supplier comparison
Ask six questions of every supplier: form and CAS; assay with basis and wavelength; water by Karl Fischer; pH; chromatographic and spectral evidence; and contaminants, micro, pack and lot code. Two offers that both say 95% can still describe different powders.
Traceability is the second layer: who manufactured the lot, which route was used, and how it was dried and milled. The catalog specification is on the NAD+ product page. The oxidation-state tests are on the identity page; market questions are on the compliance page; the separation itself is covered by the HPLC method note, and the quality page shows how a lot is released.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation