Melatonin 99% vs 1% dilution: dose, blend and the label
A 99% crystalline powder and a 1% dilution contain the same molecule at different concentrations, so the choice is arithmetic and mechanical: how many milligrams of melatonin a unit needs, how much powder the unit can hold, and how uniformly the plant can disperse it. The label, the carrier declaration and the blend validation follow from that choice. Neither grade is a stronger version of the other.
The 1% dilution is not a weaker grade; it is the same melatonin spread over a carrier so a small amount can be weighed and blended accurately.
Two concentrations, one substance
The crystalline grade is 98.5–101.5% melatonin on the dried basis, which is 985–1,015 mg per gram. The 1% dilution is a pre-blend of one part melatonin with 99 parts carrier by mass, nominally 10 mg per gram. The word “dilution” describes the concentration; it does not describe a lower quality band, a different molecule or a different regulatory status.
| Grade | Per gram | Per 100 g | Per 1 kg |
|---|---|---|---|
| Crystalline, 99% | 985–1,015 mg | 98.5–101.5 g | 985–1,015 g |
| 1% dilution | 10 mg nominal | 1 g nominal | 10 g nominal |
The 1% figure is nominal because the dilution has its own assay and its own release limit. It is not exactly 10.000 mg per gram, and a formulator should use the dilution's certificate, not the name, for the conversion. The same rule applies to the crystalline grade: 99% is a trade shorthand for a window.
The arithmetic of a switch
Mass of powder = target melatonin ÷ concentration. At 99%, a 1 mg target needs about 1.01 mg of powder; at 1%, it needs about 100 mg. At 3 mg, the pure powder needs about 3.03 mg at 99% and the dilution needs about 300 mg. At 5 mg, the pure powder needs about 5.05 mg at 99% and the dilution needs about 500 mg. The dilution buys weighability by adding carrier mass in proportion.
Use the as-is assay for weighing, not the dried-basis figure. If the lot assays 99.0% on the dried basis and loses 0.4% on drying, the as-is content is 98.6%, so the divisor is 0.986, not 0.990. The difference is small at a 0.5% moisture limit, but it is a real difference at a milligram target.
An overage is a separate decision. The finished-product manufacturer sets the label amount, the assay window and any manufacturing overage; the grade choice only sets the powder mass. A dilution does not correct a label that is wrong, and a pure grade does not correct a blend that is not uniform.
Uniformity is the real constraint
A 1% dilution is not automatically uniform. The melatonin and the carrier must be mixed so that every sample of the blend carries the same ratio, and the blend must stay uniform through storage, conveying and filling. A coarse carrier and a fine melatonin can segregate; a fine carrier and a static-prone melatonin can dust; a short mix can leave islands of concentrate.
| Risk | Crystalline 99% | 1% dilution |
|---|---|---|
| Weighing error at a low target | High; the mass is near the balance limit | Lower; the mass is about 100 times larger |
| Segregation | Local high-concentration pockets | Carrier and melatonin can separate if mismatched |
| Dust and static | High; fine crystalline powder | Lower, but carrier-dependent |
| Carrier load | None | About 99% of the powder mass |
Validate the blend rather than assume it. Take samples across the blender and from the filled units, assay them for melatonin, and set an acceptance criterion before the run. A relative standard deviation of 5% or less across samples is a common internal target, but the criterion belongs to the product and the manufacturer, not to this page. A single assay of a grabbed sample is not a uniformity study.
Geometric dilution, a carrier matched to the melatonin's particle size, a defined mixing time and a controlled fill are the usual controls. Granulation can improve flow and reduce dust, but it adds a process step and its own validation.
What the label must say
The label declares the amount of melatonin, not the mass of the pre-blend. A unit made from 300 mg of a 1% dilution carries about 3 mg of melatonin; the Supplement Facts panel or the nutrition declaration states the 3 mg, and the ingredient list states the carrier. A label that declares “300 mg melatonin” because 300 mg of blend was used is wrong by a factor of 100.
In the US, the Supplement Facts panel carries the quantity and the ingredient must be declared by its common name. In the EU, the ingredient list and the nutrition declaration carry the declaration, and the carrier is an ingredient in its own right. The carrier must be permitted in the destination and must be declared; a carrier that is acceptable in one market may not be acceptable in another.
The regulatory route does not change with the concentration. A 1% dilution is still melatonin for the purpose of the destination's rules, and the finished product's classification still turns on the market, the dose per unit and the presentation. The label claims are governed by the same claim rules as the pure grade: no disease claim, and only authorised claims where the market requires authorisation.
When to choose which
| Situation | Choice | Why |
|---|---|---|
| Low-dose unit, below 1–2 mg | 1% dilution | The powder mass is large enough to weigh accurately |
| Higher-dose capsule or tablet | Crystalline 99% | The mass fits the unit without a carrier |
| Large-fill stick pack | 1% dilution or granule | Dispersion and flow across a large fill |
| Bench or pilot batch | Crystalline 99% | Flexible weighing and no carrier to qualify |
| Dust-sensitive plant | Granule | Granulation controls dust and flow |
Choose the pure grade when the unit can carry the mass and the plant can weigh it. Choose the dilution when the target is too small for the balance or too small to disperse in the fill. Choose a granule when the problem is flow or dust rather than concentration. If the unit cannot carry the carrier mass, the dilution is the wrong answer even when the target is small.
What to ask for
Ask for the dilution's own COA: melatonin content, carrier identity and specification, loss on drying, microbiology and the blend-uniformity result. Ask for the pure lot's COA behind the dilution, so the input is traceable. Ask how the dilution is made, how the blend is validated and how the carrier is declared in the destination.
The grade comparison is on the grade page; the certificate lines are on the COA page; the pack sizes are on the ordering page; the catalog values are on the melatonin product page. The assay term is defined in the assay glossary entry.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation