02.1 Reduced vs oxidised

Reduced vs oxidised glutathione: GSH, GSSG and the assay

Technical document 02.1 · Reviewed 2026-11-19 · Glutathione

On this page
  1. One reaction, two identities
  2. Reduced against oxidised, property by property
  3. What the assay measures, and why the GSSG limit is a separate line
  4. Solubility, pH and the solution
  5. Which one is more stable, and why the question is backwards
  6. What the label has to say
  7. When each form is the right purchase

Reduced glutathione (GSH) and oxidised glutathione (GSSG) are the same tripeptide in two oxidation states. GSH carries a free cysteine thiol; two GSH molecules joined through a disulfide bridge become GSSG. They differ by CAS number, 70-18-8 against 27025-41-8, by molecular weight, 307.32 against 612.63, by the number of free thiol groups, by assay and by label name. The mass per glutathione equivalent is almost identical, which is why a form error survives a weigh-up and only fails at the label.

In one line

The two forms are one oxidation reaction apart, and the difference that matters commercially is not the weight but the free thiol.

One reaction, two identities

Glutathione is γ-L-glutamyl-L-cysteinylglycine. The glutamyl bond is unusual: it runs through the side-chain carboxyl group rather than the α-carboxyl, which is what lets the peptide survive ordinary digestion. The cysteine residue supplies a thiol, and that thiol is the only part of the molecule that changes in the reaction that concerns a buyer.

In air, and faster with heat, trace metals or an alkaline pH, two thiols lose their hydrogen and pair into a disulfide bond. The product is a dimer of two intact tripeptide units. Nothing else changes: the peptide bonds, carboxyl groups and amino groups are still there, which is why the forms behave similarly in water and differently in everything that matters.

In a biological system the reaction runs both ways, through enzymes a supplement does not contain. In a drum it runs one way, and that asymmetry is the commercial difference between the products.

Reduced against oxidised, property by property

Reduced glutathione and oxidised glutathione
PropertyReduced (GSH)Oxidised (GSSG)
CAS number70-18-827025-41-8
FormulaC10H17N3O6SC20H32N6O12S2
Molecular weight307.32612.63
Free thiol groupsOneNone
Assay98.0–101.0% by HPLCIts own range on its own method
ColourWhite to off-whiteDescribed on its own certificate; an oxidised lot usually reads duller
SolubilityFreely soluble in water; acidic solutionWater-soluble; its own solution specification
Label nameL-Glutathione (reduced)Glutathione disulfide, or oxidised glutathione

The molecular weights are not a conversion factor. One mole of the oxidised form, 612.63 g, contains two moles of glutathione units, 614.64 g, because the bridge costs two hydrogen atoms. The mass ratio is 1.003, so there is no salt factor and no arithmetic that repairs a form error.

What the assay measures, and why the GSSG limit is a separate line

The catalog assay for the reduced grade is 98.0–101.0% by HPLC, a band three percentage points wide. A band that narrow only means something when the method is fixed and the oxidised fraction is measured. A non-specific method that counts everything with a thiol or a peptide bond can report a total near 100% while the reduced content sits at the bottom of the band: a lot with 1.5% of the oxidised form and 98.5% of the reduced form sums to 100% as “total glutathione” and to 98.5% as the substance the label declares.

That is why the GSSG limit belongs on the certificate as its own line, with its own standard. The limit is agreed in the specification rather than printed in the catalog summary, because the right ceiling depends on the dose and on the storage the finished product will see.

The mass balance closes the picture. Assay plus loss on drying plus the oxidised fraction plus ash should approach 100%. A lot at 99% assay, 0.4% moisture and 2% oxidised form does not add up, and the missing mass is something the certificate has not named.

Solubility, pH and the solution

The reduced form is freely soluble in water, and a 5% solution reads pH 2.0–3.0 because the peptide still carries free carboxyl groups. That acidity suits a beverage, where a low pH also slows thiol oxidation. The oxidised form is also water-soluble and has its own solution specification; the two solutions are not interchangeable, and the pH of a solution is not a redox test. A lot can read pH 2.5 and be half oxidised.

Neither solution is a storage format: in water the reaction that made the dimer has oxygen, heat and time on its side, and a clear bottle standing in daylight is the last container to choose. A stick dissolved at the point of use avoids most of that exposure.

Which one is more stable, and why the question is backwards

The oxidised form is the product of the degradation, so in air it is the more stable: it has nowhere further to go by that route. The reduced form moves towards it and never moves back. That is why the shelf-life question for a reduced lot is really a question about the ratio, and why a specification without a GSSG limit and a retest period is incomplete.

The conditions that speed the move are the ones described on the stability page: oxygen, heat, moisture, alkaline pH and trace metals. A drum stored warm for a year arrives with a different ratio from the one on its certificate, and the change may not be visible.

What the label has to say

The label names the substance that was weighed. For the reduced grade that means L-glutathione, with the reduction state written out; for the oxidised material it means glutathione disulfide or oxidised glutathione. A label that says only “glutathione” leaves the form open, and a reviewer may ask which substance the panel declares.

Glutathione carries no nutrient reference value, so the panel states an amount per portion rather than a percentage of an NRV. In the EU the name and the quantity are mandatory particulars; in the US the Supplement Facts panel carries the dietary ingredient and its amount. A blend built on a glutathione-rich yeast is a different declaration from a defined amount of the peptide, and the panel has to match the assay behind it.

When each form is the right purchase

The reduced form is the commercial supplement grade and the one this catalog carries. It suits capsules, tablets and powder sticks, where the powder is weighed, blended and packed dry. It is the form named in most specifications and the one a formulator means by “glutathione”.

The oxidised form is bought as a reference standard, for laboratory work, and occasionally as a named ingredient where the market file covers it. It cannot simply replace the reduced powder, and it does not carry the same label. Liposomal glutathione is a delivery format of the reduced form, and S-acetyl glutathione is a different molecule with its own CAS number.

The catalog specification is on the product hub; the grades page sets this comparison in the wider range; the COA page shows how the ratio is reported; the identity page shows the tests that tell them apart; the HPLC note describes the separation.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation