02 Grade comparison

Reduced, oxidised, liposomal: choosing a glutathione grade

Technical document 02 · Reviewed 2026-11-19 · Glutathione

On this page
  1. Why the form comes before the grade
  2. Reduced against oxidised
  3. Colour, moisture and handling
  4. Dose arithmetic and the label
  5. What to write into the specification
  6. When another form is the wrong purchase

The catalog grade is reduced L-glutathione, the free-thiol tripeptide, CAS 70-18-8. The material it is most often confused with is oxidised glutathione (GSSG), a dimer with its own CAS number, twice the molecular weight and a different assay. Liposomal and acetylated versions are a delivery format and a chemical derivative, not grades of the same powder. The grade decides the mass on the balance, the number on the certificate and the words on the label.

In one line

The grade is not a purity band but a different molecule, and the assay method, the colour and the label follow from that choice.

Why the form comes before the grade

Glutathione is a tripeptide of glutamic acid, cysteine and glycine, joined through a γ-glutamyl bond that survives ordinary digestion and gives the molecule its shape. The cysteine side chain ends in a thiol group. Two of those thiols can pair in air to form a disulfide bridge, and the product is oxidised glutathione: two tripeptide units joined cystine-style, with no free thiol left.

That single reaction is the whole reason the product has two identities. The reduced form is the one that is bought, sold and weighed in supplement manufacturing. The oxidised form is a degradation product, an analytical standard and, in a few markets, a named ingredient in its own right. An order that names only “glutathione” leaves the oxidation state open, and with it the substance being bought.

The manufacturing route does not settle the question. Glutathione is made by fermentation or by enzymatic synthesis, and either route produces the same tripeptide; what differs between sources is the impurity profile, the moisture and the residual oxidised fraction, and those are the lines a buyer can actually check.

Reduced against oxidised

Reduced L-glutathione and oxidised glutathione
PropertyReduced (GSH)Oxidised (GSSG)
CAS number70-18-827025-41-8
FormulaC10H17N3O6SC20H32N6O12S2
Molecular weight307.32612.63
Free thiol groupsOne per moleculeNone; the bond is a disulfide
Catalog assay98.0–101.0% by HPLCIts own range, on its own method
AppearanceWhite to off-white powderA solid described on its own certificate; an oxidised lot usually reads duller
Water solubilityFreely soluble; the solution is acidicSoluble in water; its own solution specification
Label nameL-glutathione (reduced)Glutathione disulfide, or oxidised glutathione

The mass difference is small in proportion: 612.63 g of the oxidised form carries two glutathione units, 614.64 g of the reduced form, because the bridge costs two hydrogen atoms. That is exactly why a form error survives a weigh-up. A formulator who substitutes one for the other at the same weight will not see a mass-balance problem, only a label that names the wrong substance.

Colour, moisture and handling

The catalog powder is white to off-white, free-flowing, with at least 95% through 40 mesh. It is hygroscopic, and loss on drying is capped at 1.0%, so an open pouch in a humid room will move the moisture line before it moves anything else. The dry powder carries a faint sulfur note from the thiol; that note is part of the material, not a defect. A note that becomes sharp and persistent, with a duller colour and a falling assay, is oxidation.

The 5% solution sits at pH 2.0–3.0 because the peptide still carries free carboxyl groups. That acidity is useful in a beverage, where it lowers the pH and slows the thiol oxidation that alkaline conditions accelerate, and it is a constraint in a capsule fill where an acid-sensitive excipient sits beside it.

Dose arithmetic and the label

The label declares the ingredient, so the weigh-up has to be corrected for assay. A formula that declares 500 mg of reduced L-glutathione per serving needs 500 ÷ 0.99 ≈ 505 mg of a 99.0% powder. The arithmetic is not a recommended intake; it is what keeps the declared quantity and the batch record in agreement.

The oxidation state cannot be corrected by arithmetic. Because the two forms are almost equal per gram of glutathione equivalent, there is no conversion factor that turns an oxidised lot into a reduced one. If a blend is built on the oxidised form and the label says reduced, the number is right and the ingredient is wrong.

Liposomal glutathione is reduced glutathione enclosed in a lipid vesicle. It is a delivery format: the label names the glutathione content, and the assay has to separate the peptide from a lipid matrix before it can measure it. S-acetyl glutathione is a different molecule with its own CAS number and its own specification, and N-acetylcysteine is not glutathione at all despite the shared letters.

What to write into the specification

  • “L-Glutathione, reduced, CAS 70-18-8, C10H17N3O6S, molecular weight 307.32.”
  • “Assay 98.0–101.0% by HPLC, with the method and the basis stated.”
  • “Oxidised glutathione (GSSG) limit agreed and printed on the certificate, with the lot result.”
  • “Identification by HPLC retention and infrared spectrum against the reduced reference.”
  • “Loss on drying ≤1.0%; pH of a 5% solution 2.0–3.0; ≥95% through 40 mesh.”
  • “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology as listed.”
  • “Pack and storage condition named, because both are part of the stability claim.”

When another form is the wrong purchase

An oxidised lot is not a substitute for a reduced one, however close the assay looks, because the substance on the label would be different. A liposomal concentrate is not a substitute for the powder in a capsule line either: the dose is carried in the dispersion, the analysis is different and the pack has its own shelf life.

The reverse also holds. A buyer who wants the disulfide as a reference standard should not accept the reduced powder and oxidise it in-house unless the oxidation is validated, because a partial conversion gives a mixture whose purity is unknown.

The catalog specification is on the product hub. The level-four comparison takes the assay and label questions further; the COA page shows where the GSSG limit sits; the identity page sets out the tests that tell the two apart; the stability page explains why one of them is the other's degradation product.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation