02.1 Mannose vs mannitol

D-Mannose vs mannitol: two similar names, two materials

Technical document 02.1 · Reviewed 2026-11-19 · D-Mannose

On this page
  1. Two names that share six letters
  2. The structure: an aldohexose against a sugar alcohol
  3. Rotation: the number that separates them
  4. Sweetness is not an identity test
  5. Moisture: hygroscopic against low-hygroscopicity
  6. The label and the market file
  7. When to choose which

D-Mannose and mannitol are not two grades of one material. D-Mannose is an aldohexose, CAS 3458-28-4, C6H12O6, molecular weight 180.16; mannitol is a sugar alcohol, CAS 69-65-8, C6H14O6, molecular weight 182.17. Both are white, crystalline and sweet, which is exactly why the names get confused. The formula, the specific rotation, the moisture behaviour and the label name all separate them.

In one line

D-Mannose is a reducing sugar and mannitol is a sugar alcohol: the names differ by a suffix, but the formula, the rotation, the moisture behaviour and the label are all different.

Two names that share six letters

The names are easily misread on a purchase order, a label proof or a certificate. “Mannose” ends in -ose, the suffix of a sugar; “mannitol” ends in -itol, the suffix of a sugar alcohol. The ending is the first clue to the class, and the class is the first clue to the behaviour.

A specification written for D-mannose does not describe mannitol, and a certificate that says “mannitol” is not evidence for a D-mannose lot. The CAS number is the shortest unambiguous identifier: 3458-28-4 for D-mannose, 69-65-8 for mannitol. A purchase order that names only “mannose” without a CAS number leaves the door open.

The structure: an aldohexose against a sugar alcohol

D-Mannose is the C2 epimer of D-glucose: the two sugars differ only in the configuration at carbon 2. It has a carbonyl group in its open-chain form and exists in solution as a mixture of ring and open forms, which is what makes it a reducing sugar. Mannitol is the reduced form of mannose: the carbonyl is gone, replaced by a second alcohol group, so the molecule is a polyol.

That single reduction changes the formula by two hydrogen atoms (C6H14O6 against C6H12O6) and the molecular weight by about two units (182.17 against 180.16). It also changes the chemistry: a reducing sugar participates in Maillard browning and in oxidation reactions that a sugar alcohol does not.

D-Mannose and mannitol side by side
PropertyD-MannoseMannitol
CAS number3458-28-469-65-8
FormulaC6H12O6C6H14O6
Molecular weight180.16182.17
ClassAldohexose; reducing sugarSugar alcohol; non-reducing
Specific rotation+14.0° to +16.0° dry basisAbout +23° to +24° dry basis
Moisture behaviourHygroscopic; cakes in humid airLow hygroscopicity; chosen for moisture-sensitive formulas
SweetnessSweetSweet, with a cooling mouthfeel
Label nameD-MannoseMannitol

Rotation: the number that separates them

Specific rotation is the practical discriminator on a certificate. The D-mannose specification is +14.0° to +16.0° on the dry basis. Mannitol sits in a higher range, about +23° to +24° on the dry basis. The two windows do not overlap, so a polarimeter reading is a quick check on which material is in the bottle, provided the solvent, concentration, temperature and wavelength are stated.

Rotation is also a purity signal. A D-mannose lot blended with mannitol moves upward toward the mannitol range; a blend with glucose, which rotates at about +52.5° at equilibrium in water, moves upward more steeply. A figure outside +14.0° to +16.0° does not prove which adulterant is present, but it means the lot does not match the expected identity and purity.

Assay alone is weaker. An HPLC method that does not resolve mannose from mannitol can return a combined peak inside the 98.0–101.0% range while the rotation exposes the blend. The rotation should sit beside the assay on the certificate, with the detector and conditions named.

Sweetness is not an identity test

Both materials are sweet, so taste cannot tell them apart. Mannitol adds a cooling sensation and is often used in chewables and tablets for that reason; D-mannose tastes simply sweet in water. A sensory difference is not a specification, and a formulator should not use it to accept or reject a lot.

The sweetness matters in the dosage form. D-Mannose contributes to the taste of a stick pack or a drink mix, and its solubility makes it easy to incorporate. Mannitol contributes bulk and a cooling mouthfeel in a tablet, where it often acts as a diluent rather than the active ingredient. The role in the formula is different even when both are described as sweet powders.

Moisture: hygroscopic against low-hygroscopicity

D-Mannose picks up water from the air and cakes. The catalog loss on drying is ≤0.5%, and that is a release gate, not a storage allowance; an opened pouch can gain moisture until the powder forms lumps and the as-is assay falls. The pack, the liner and the closing method are part of the material's practical specification.

Mannitol is chosen for moisture-sensitive tablets because it picks up little water under normal storage. A humid warehouse still matters, but the difference in pickup is real. The reducing/non-reducing split matters too: D-mannose can brown with an amine source under heat, while mannitol does not carry that carbonyl.

If a formula needs a non-reducing, low-hygroscopicity powder, mannitol may be the right excipient. If the label claims D-mannose, mannitol is not a substitute, because the label and the balance would name different materials. The stability page covers the caking and browning routes in more detail.

The label and the market file

The label names the material, and the two names are not interchangeable. A Supplement Facts panel or an ingredient list that says “mannitol” is declaring a sugar alcohol; one that says “D-mannose” is declaring a monosaccharide. A formula that uses mannitol as a diluent must declare it as mannitol, separately from any D-mannose content.

The regulatory route follows the material, not the name family. A file built for mannitol as an excipient or additive does not cover D-mannose as an ingredient, and a D-mannose specification is not an authorisation for any market. The buyer's regulatory team confirms the route for the destination, the permitted use and the claim wording, against the current text as of this review.

This page makes no health claim for either material. Any wording that links D-mannose to a body system or a condition is a claim, and claims are restricted; the brand's regulatory reviewer clears the wording for the market where the finished product will be sold.

When to choose which

Choose D-mannose when the label calls for D-mannose and the dosage form can carry a hygroscopic, reducing sugar. Capsules, tablets, stick packs and drink mixes are the usual formats, and the crystalline powder is the catalog grade. Choose the granulated form only when flow or dust control matters more than fast dissolution.

Choose mannitol when the formula needs a non-reducing, low-hygroscopicity diluent, a cooling taste or a compendial excipient with its own monograph. Do not choose it as a more free-flowing substitute for D-mannose; it is a different material. A switch either way needs a new specification, label and route check.

The D-mannose product page publishes the catalog specification; the grades page describes the powder forms; the identity page sets out the tests that distinguish the two materials; the compliance page sets out the market file; the HPLC method note explains how the separation works.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation