Creatine HCl vs creatine monohydrate: solubility, creatine content and fill
Creatine hydrochloride and creatine monohydrate are different solids: the hydrochloride is the 1:1 salt, CAS 17050-09-8, 167.59 g/mol, with about 78% creatine; the monohydrate is the hydrate, CAS 6020-87-7, 149.15 g/mol, with about 88% creatine. The hydrochloride is freely soluble and acidic; the monohydrate is sparingly soluble and closer to neutral. For the same creatine dose, the hydrochloride needs more powder, so the fill and the capsule count change.
The hydrochloride carries about 78% creatine and dissolves freely; the monohydrate carries about 88% and dissolves sparingly, so the same creatine dose is a different weight and a different fill.
Two names, two identities
The hydrochloride is creatine with one equivalent of hydrogen chloride; the monohydrate is creatine with one molecule of water in the crystal. Neither is a diluted or “purer” version of the other: they are different solids with different molecular weights, counter-ions and label names.
| Property | Creatine hydrochloride | Creatine monohydrate |
|---|---|---|
| CAS number | 17050-09-8 | 6020-87-7 |
| Formula | C4H9N3O2·HCl | C4H9N3O2·H2O |
| Molecular weight | 167.59 g/mol | 149.15 g/mol |
| Creatine content | About 78.2% theoretical; catalog 74.0–78.0% | About 87.9% theoretical |
| Counter-ion or water | Chloride, about 21.2% | Water of crystallisation, about 12.1% |
| Water solubility | Freely soluble | Sparingly soluble, about 13 g/L at room temperature |
| Solution pH | Acidic | Closer to neutral |
| Loss on drying | ≤1.0% | ≤12.0% |
| Label name | Creatine hydrochloride | Creatine monohydrate |
The loss-on-drying row is not a purity ranking: the monohydrate's water is part of its identity, while the hydrochloride's low LOD reflects the absence of water of crystallisation.
Solubility: the real separation
The hydrochloride dissolves readily in water. The monohydrate is sparingly soluble, roughly 13 g/L at room temperature, a limit that shapes the dosage form: a 5 g creatine dose as monohydrate is about 5.7 g, a large fraction of what a litre can dissolve, let alone a 300 mL bottle. The hydrochloride reaches the same dose in a much smaller volume.
Solubility is not absorption. A salt that dissolves faster in a beaker does not automatically deliver more creatine to muscle, and a claim of better absorption needs its own evidence. What the difference does establish is a formulation choice: a clear, concentrated drink is easier with the hydrochloride, while a capsule or tablet can use either form.
The acid is the trade-off. The hydrochloride solution is acidic, which affects flavour, acid-sensitive ingredients and the rate at which creatine cyclises to creatinine. The monohydrate is closer to neutral but cannot reach the same concentration. The choice is between a solubility constraint and an acid constraint, not between a good and a bad powder.
Creatine content and the dose arithmetic
The label dose is usually written as creatine, not as the salt, so the conversion is part of the formulation. At 78% creatine, 1 g of hydrochloride carries 780 mg; at 74%, 740 mg. The monohydrate at about 88% carries 880 mg per gram. The 99.0–101.0% catalog assay is a salt figure and must not be used as the creatine content.
For a 5 g creatine dose, the hydrochloride needs about 6.4 g at 78% or 6.8 g at 74%; the monohydrate needs about 5.7 g. The same label dose means a different powder mass, scoop volume and capsule count.
| Creatine dose | Creatine HCl at 78% | Creatine HCl at 74% | Creatine monohydrate at 88% |
|---|---|---|---|
| 3 g | 3.85 g | 4.05 g | 3.41 g |
| 5 g | 6.41 g | 6.76 g | 5.68 g |
The range across the hydrochloride window is real: a lot at 74.0% needs about 5% more powder than one at 78.0% for the same dose. That is why the certificate's creatine line matters to the fill, and why a supplier's “99%” assay does not answer the question.
What changes in the capsule, tablet or stick
Because a capsule fills by volume, both bulk density and creatine content set how much creatine fits. A 500 mg fill of hydrochloride at 78% delivers about 390 mg of creatine; the same fill of monohydrate delivers about 440 mg. For 1 g of creatine, the hydrochloride needs roughly 1.28 g at 78%, or 1.35 g at 74%, against about 1.14 g of monohydrate.
That can change the capsule size or how many capsules make a serving. It also makes flow and bulk density more important: a fine hydrochloride powder may need a larger capsule or a granulated grade for a consistent fill. The monohydrate's higher creatine fraction gives it more room in a small capsule, despite its lower solubility.
For a stick pack or drink mix, the hydrochloride's solubility usually outweighs its lower creatine fraction: the powder dissolves in a smaller volume and the drink can be clear. The cost is the acid and the need to validate the matrix: measure creatine and creatinine in the finished drink at the target pH and heat load, because a bulk-powder result does not transfer. In a tablet, either form can work, but the hydrochloride's acidity and hygroscopicity belong in the excipient and coating check. The grades page covers the powder and granulated options within the hydrochloride.
What the label has to say
The label must name the form. “Creatine” alone is ambiguous when the powder is a salt; the ingredient list should say creatine hydrochloride, and the declared mass should tie to the creatine content the form carries. A 6.4 g hydrochloride dose at 78% delivers 5 g of creatine, and the label arithmetic should show which number is declared.
The regulatory route is form-specific. The EU novel-food consultation that records creatine monohydrate as consumed before 1997 is attached to the monohydrate; the hydrochloride has its own CAS and counter-ion, and its status must be confirmed. In the US, the monohydrate's history and any GRAS conclusion do not automatically cover the hydrochloride, and a new form can raise an NDI question. The compliance page sets out the file.
Claims are separate. “More soluble” is a physical property; “absorbs better” is a claim and needs evidence. No disease claim is available in either market. This page describes the specification and the arithmetic, not a health claim.
When to choose which
Choose the hydrochloride for a concentrated solution, a clear drink or a small volume where the formula can tolerate acidity. Choose the monohydrate for a capsule, tablet or dry blend, a neutral solution, or the higher creatine fraction.
Do not switch forms on a certificate alone. A change moves the molecular weight, creatine content, solubility, pH, label name and regulatory file. Run the fill or dispersion trial, check finished-product stability, and update the specification and label together.
The catalog specification is on the creatine HCl product page; the monohydrate is on the creatine monohydrate page. The COA page shows the salt and creatine figures, and the identity page gives the separating tests. The methods section explains the HPLC and titration, and the quality page describes release.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation