01 COA & batch testing

What the COA for chondroitin sulfate actually contains

Technical document 01 · Reviewed 2026-11-19 · Chondroitin Sulfate

On this page
  1. The certificate as a test report
  2. What the assay, protein and moisture figures measure
  3. Release limit versus batch result
  4. What moves between batches
  5. When to order an outside test
  6. What to compare between suppliers

The certificate for a chondroitin sulfate sodium lot reports appearance, identification by infrared and electrophoresis, assay by CPC titration on the dried basis, loss on drying, pH, protein, particle size, heavy metals and microbiology. Each line carries the method and the release limit. The ranges here are the catalog specification; the batch COA confirms the drum you receive.

In one line

A chondroitin assay is a charge measurement, not a purity figure; the certificate has to show the standard, the drying basis and the electrophoretic profile beside the percentage.

The certificate as a test report

A certificate is readable when every row answers three questions: what was measured, which method produced the value, and which limit the lot was released against. A certificate that lists only a parameter and a pass mark cannot be compared with another supplier's document.

Identity, assay and composition · chondroitin sulfate sodium
ParameterMethodRelease limit
AppearanceVisualWhite to off-white powder
IdentificationInfrared spectroscopySpectrum conforms to the reference
IdentificationElectrophoresisPrincipal band matches the reference standard
Assay, dried basisCPC titration90.0–105.0%
Loss on dryingGravimetric≤10.0%
pH (5% solution)Potentiometry5.5–7.5
ProteinColorimetric or nitrogen determination≤6.0%
Physical, contaminant and microbiological limits
ParameterMethodRelease limit
Particle sizeSieve analysis≥95% through 80 mesh
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent

The two identification lines are not redundant. Infrared spectroscopy compares the functional-group fingerprint with a reference; electrophoresis separates the chains by charge and size. The assay then asks how much sulfate-bound material is present. A lot can satisfy one line and fail another.

What the assay, protein and moisture figures measure

Chondroitin sulfate sodium is a mixture of sulfated glycosaminoglycan chains, not a single molecule with one formula weight. Sulfate count and chain length vary with source tissue and extraction. The assay is reported on the dried basis because the powder holds water; an as-is result would fall as moisture rises without any change in chondroitin content.

CPC titration uses cetylpyridinium chloride, a cationic surfactant that binds the anionic sulfate groups and forms an insoluble complex. The CPC consumed is measured by titration and converted to chondroitin sulfate against a standard. The result is a charge-based equivalent, not a mass purity. It depends on sulfation pattern, chain length and the standard, which is why the method line matters as much as the percentage.

The 90.0–105.0% window looks wide until the method is considered. A titration against a reference can report above 100% when the lot's sulfation or chain length differs from the standard; the upper bound allows for that method behaviour rather than signalling a purer material. It is not 105% pure material. The certificate should name the standard and the titration mode so another laboratory can repeat it.

Protein is residual cartilage protein that survived purification, and it is reported separately because it is not chondroitin. A high result can point to incomplete digestion or washing, and it changes colour and foaming. Loss on drying measures moisture, not chondroitin; a lot at the 10.0% ceiling is inside the specification but carries less dry matter and less room for moisture pickup in the customer's store.

Release limit versus batch result

The release limit is the boundary the lot was judged against; the batch result is what the laboratory measured on that lot. Both belong on the certificate, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result.

Infrared and electrophoresis are reported as conforms or does not conform; assay, loss on drying, pH and protein carry a measured value. Heavy metals and microbiology carry individual results or a statement that the lot was tested, with the report available.

An assay of 90.2% is a pass, but three lots at 90.1–90.4% look different from three lots at 98–101%. A loss on drying of 9.8% is a pass, but it leaves little margin for a humid filling room. Read the margin, not only the verdict.

What moves between batches

Source tissue is the first variable. Bovine tracheal cartilage, porcine nasal cartilage and shark cartilage differ in the mix of chondroitin sulfate chains, and one extraction process will not produce an identical molecular-weight profile from each. Assay, electrophoretic pattern, protein level and colour can all move when the source changes, even if the specification window stays the same.

Extraction and drying are the second variable. Alkali extraction, enzymatic digestion, precipitation and washing determine residual protein and low-molecular-weight material; drying determines loss on drying and can affect colour. Milling and sieving determine particle size, so a finer cut changes flow and bulk density without changing assay. One certificate is a snapshot; a drift across five lots says more than a single result near a limit.

When to order an outside test

Order an independent test for a new source, a first shipment into a regulated market, a certificate that cannot be traced to a lot, or a disputed result. The useful panel is not a full repeat: CPC assay against a declared standard, electrophoresis against a reference, protein and loss on drying, ICP-MS for the metals and the microbiological absence tests.

Ask the laboratory to report the detection limit and the reference standard with each result. A “not detected” line without a limit describes the method's sensitivity, not the sample. For electrophoresis, the report should name the gel or membrane, the buffer, the standard and the staining procedure; a band pattern without a method cannot be compared across laboratories. The ICP-MS method note and the microbiology method note describe what those panels do and do not prove.

What to compare between suppliers

Put the six lines that change the number side by side. Two quotations that agree on assay but disagree on method, standard, drying basis, protein limit, electrophoresis and TSE file are not describing the same material.

Six lines to compare before two chondroitin certificates are treated as equivalent
LineWhy it changes the numberWhat to ask for
Source and tissueChain length and sulfation differ by species and tissueSpecies, tissue, country of origin
Assay method and standardCPC response depends on the referenceMethod text, standard, titration mode
Drying basisAs-is and dried-basis results are not comparableThe basis printed on the certificate
Electrophoretic profileShows whether other glycosaminoglycans are presentGel, buffer, standard, pattern
Protein and moistureBoth dilute the dry matter and affect stabilityResults and methods, not only limits
TSE and source fileThe assay cannot show species or BSE/TSE statusDeclaration, origin, establishment

The catalog specification sits on the chondroitin sulfate product page. The source decision is on the source comparison page; the tests that separate chondroitin from other glycosaminoglycans are on the identity page; the release workflow is on the quality page. The certificate is defined in the COA glossary entry.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation