04 MOQ & ordering

Chondroitin sulfate: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Chondroitin Sulfate

On this page
  1. Why the minimum is 1 kg
  2. Packaging and pack labels
  3. Lead time and what starts the clock
  4. The six details a quotation needs
  5. Samples and qualification
  6. Terms that belong in the order

The minimum order is 1 kg, drawn from a released lot and packed in a foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is typically 1–7 days for a catalog grade, and a quotation depends on the source, the mesh, the quantity, the destination and the document pack. The 1 kg unit exists so a buyer can qualify the material before committing to a drum.

In one line

One kilogram is the qualification unit, not a retail pack: it is drawn from a released lot so the sample, the COA and the scale-up drum describe the same material.

Why the minimum is 1 kg

Chondroitin sulfate is sold as a powder in two pack sizes, and the smaller one is the qualification unit. A buyer needs enough material to run the identity and assay tests, make a trial capsule or tablet batch, and keep a retained sample. One kilogram covers those steps for a typical trial and leaves a record that can be compared with the production drum.

The unit also keeps the lot chain intact. A 1 kg pouch filled from a released lot carries the same lot code as the 25 kg drums from that lot, so the sample result and the production COA describe the same material. A sample repacked from a different lot, or a hand-filled bag with no lot code, breaks that chain and cannot be used to qualify the drum.

The minimum is not a retail pack and it is not a free sample. It is a commercial unit with a COA, a pack label and a retained sample behind it. Buyers who need a smaller quantity for a feasibility study should ask whether a sample can be drawn from the same lot; buyers who need a larger quantity should move to the 25 kg drum rather than order multiple pouches, because the drum is the production pack and the stability file should cover it.

Packaging and pack labels

Standard packs for chondroitin sulfate sodium
PackConstructionNet weightTypical use
Foil pouchFoil laminate, heat-sealed1 kgQualification, trial batch, retained sample
Fiber drumFiber drum with inner liner25 kgProduction, scale-up, repeat ordering

The liner is the moisture barrier, not the fiber wall. A drum with a torn or poorly sealed liner is an open pack in slow motion, and the powder will pick up water through it. The pack label should carry the product name, the source, the lot code, the net weight and the storage condition; the certificate and the drum label should show the same lot code.

If a desiccant, a nitrogen flush or a specific liner is required, write it into the order. Those are pack options, not assumptions, and they change the stability file. The same applies to a customer-specific label or a pallet configuration: agree it before the lot is packed, because re-packing a drum is a new pack and a new risk.

Lead time and what starts the clock

The catalog lead time is 1–7 days for a released lot in the standard pack. The clock starts when the order, the specification and the document pack are agreed, not when the first email arrives. A query that names the source, the mesh and the destination can be quoted and scheduled in one step; a query that leaves those open has to wait for the answers.

A source change, a new mesh, a granulated grade or a customer-specific pack adds time because the lot has to be produced or re-packed and the COA has to be issued against the new specification. Shipping time is separate from lead time, and the Incoterm decides where the supplier's responsibility ends. Ask for the dispatch date and the estimated arrival date as two different lines.

The six details a quotation needs

A quotation is only comparable when it describes the same material. These six details turn an inquiry into a quotation that can be checked against another supplier's.

Six details to include in a chondroitin sulfate inquiry
DetailWhat to stateWhy it matters
Product and sourceChondroitin sulfate sodium; this catalog grade is bovine cartilageSource changes the file, the label and the molecular weight
Grade and meshPowder at 80 mesh, granulated or milled to a finer cutFlow, compaction and capsule fill depend on it
Quantity and pack1 kg pouch or 25 kg drum; number of unitsThe pack is part of the stability file
Destination and IncotermCountry, port or door, and the agreed trade termDocuments and shipping responsibility follow the destination
DocumentsCOA, TDS, BSE/TSE or species declaration, allergen statementThe file has to match the market and the customer's audit
HandlingDesiccant, nitrogen, liner or customer labelPack options change the specification and the lead time

A quotation that does not ask these questions is a quotation for an unspecified material. The COA page shows which results should come with the lot, and the compliance page lists the documents a regulated market may ask for.

Samples and qualification

A sample should be drawn from a released lot and accompanied by that lot's COA. Test it for identity, assay, loss on drying and protein at minimum, and compare the results with the certificate. If the sample passes, the production drum from the same lot is the scale-up material; if it fails, the failure is information about the lot, not a reason to request a different sample until one passes.

Keep a portion of the sample under the same storage condition as the production pack. A sample kept in a desk drawer is not a retained sample, and a result from it cannot be compared with a drum that was stored correctly. The 1 kg pouch is large enough to split into a test portion and a retention portion, which is one reason it is the minimum unit.

Terms that belong in the order

The quotation and the order confirmation should name the product, source, grade, pack, quantity, Incoterm, payment terms, document pack and delivery window. They should also state the retention period for the lot sample and the window for a quality claim after receipt. A technical file that is promised in an email but not listed in the order is easy to lose when the shipment is arranged.

Storage and handling terms belong in the same document. The buyer should confirm who is responsible for the pack after arrival, how a partially used drum is closed, and what happens if the liner is damaged in transit. Those are commercial and quality terms, not technical footnotes. The stability page explains why the pack matters; the product page carries the catalog specification; the MOQ glossary entry and the lead-time entry define the two terms most often used loosely.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation