Bovine, porcine or shark chondroitin: choosing a source
The three commercial sources are bovine cartilage, porcine cartilage and shark cartilage, and they are not interchangeable on a label or in a supplier file. All three can meet the same 90.0–105.0% assay window, but they differ in tissue, average molecular weight, BSE/TSE documentation, allergen assessment and the ingredient name the label carries. This catalog grade is bovine cartilage; the other sources are compared because a source switch changes the file. Choose the source first, then write the specification around it.
The species on the label and in the file decides the grade before the assay does; bovine, porcine and shark material carry different documentation even when the powder looks the same.
Why the source is a grade decision
Chondroitin sulfate is a family of sulfated glycosaminoglycan chains rather than one fixed molecule. The chains are extracted from cartilage, and the species and tissue determine the mix of chain lengths and sulfation patterns that end up in the powder. Two suppliers can report the same assay and still ship materials with different molecular-weight profiles, different residual protein and different colour.
The source is also a document decision. A bovine lot needs a BSE/TSE declaration tied to the species, tissue and country of origin. A porcine lot needs a species declaration and, for many buyers, religious certification. A shark lot needs species identification and an allergen assessment because shark is a fish. None of those documents can be replaced by an assay result, and a source change is a new ingredient file even when the CAS number is unchanged.
Finally, the source is what the customer reads. A brand that has positioned a product around a bovine ingredient cannot switch to porcine material without changing the label, the specification and possibly the customer's approval. The grade decision therefore starts with the label and the market, not with the lowest assay figure.
Bovine, porcine and shark side by side
Commercial chondroitin sulfate sodium is typically specified to the same 90.0–105.0% window on the dried basis across the three sources. What changes is the starting tissue, the molecular-weight profile and the file that travels with the lot.
| Attribute | Bovine | Porcine | Shark |
|---|---|---|---|
| Starting tissue | Tracheal or nasal cartilage | Trachea or nasal septum | Cartilage from fin or back |
| Average molecular weight | About 20–25 kDa for tracheal material | Reported ranges overlap bovine; ask for the measured value | About 50–80 kDa in reported ranges |
| Purified assay | 90.0–105.0% dried basis | 90.0–105.0% dried basis | 90.0–105.0% dried basis |
| BSE/TSE file | Species, tissue, origin and SRM-free declaration | Species declaration; pigs are not a TSE-relevant species | No BSE/TSE file; species and CITES check where listed |
| Allergen and religious note | Animal-derived; halal or kosher certificate where required | Animal-derived; religious certificate often decisive | Fish-derived; assess the fish allergen entry |
| Label name | Bovine chondroitin sulfate sodium | Porcine chondroitin sulfate sodium | Shark chondroitin sulfate sodium |
The molecular-weight figures are reported ranges for cartilage-derived material, not constants. Extraction, purification and drying shift the average, and a supplier that claims a molecular weight should report the method and the value on the certificate. A number copied from a source table is not a lot result.
What the powder looks and handles like
All three sources are sold as a white to off-white powder, typically with ≥95% through 80 mesh. The powder is soluble in water and the solution is viscous, which matters at the filling and blending stage more than at the label stage. Bulk density and flow vary with milling, granulation and moisture, so the same source can arrive as a free-flowing powder or as a compacting solid depending on the process.
Colour and odour are useful source and purification signals. A dark or fishy lot is not a premium variant; it usually points to residual protein, incomplete washing or a drying step that ran hot. Bovine and porcine material should be low in odour, and shark material needs a tighter odour specification if the capsule shell is not sealed. A source change should trigger a fresh sensory check, not only a new assay.
Capsules, tablets and powder sticks
The dosage form decides the particle size and flow requirement. A capsule filling line wants a free-flowing 80 mesh powder with a consistent bulk density; a tablet line wants a powder that compacts without sticking, which may mean granulation rather than a finer milling cut. A powder stick or drink mix needs a powder that disperses without lumps, and the source's residual protein can affect foaming at that stage.
The label decides how much powder has to fit into each unit. Chondroitin sulfate is dosed in grams, not milligrams, so the capsule count or the stick weight is a formulation constraint. That is a reason to settle the source and the mesh before the capsule size is fixed, not after the first stability batch.
Writing the source into the specification
A source-specific specification needs more than the word chondroitin. It should name the species and tissue, the salt form, the assay method and standard, the drying basis, the electrophoretic identity test, protein and moisture limits, particle size, the contaminant panel and the TSE or species declaration. If a molecular-weight range is claimed, the method and the range belong on the same line.
A workable line reads: chondroitin sulfate sodium from bovine cartilage, assay 90.0–105.0% on the dried basis by CPC titration against a declared standard, identification by infrared and electrophoresis, protein ≤6.0%, loss on drying ≤10.0%, pH 5.5–7.5, ≥95% through 80 mesh, with a BSE/TSE declaration naming species, tissue and origin. The same structure works for porcine and shark material with the source line and the file changed.
When not to switch the source
Do not switch when the label, the notified formula or the customer's approval names a species. Do not switch when the destination market requires a document the new source cannot supply, or when the allergen assessment for a fish-derived material has not been completed. Do not switch on an assay certificate alone: the electrophoresis, protein and moisture results belong in the comparison.
A source switch is a new ingredient file. It needs a new specification, a new COA review, a new TSE or species declaration and, where the label changes, a new artwork approval. The bovine versus porcine page narrows the comparison to the two terrestrial sources. The assay method is explained on the COA page, the identity tests on the identity page, and the market files on the compliance page. The catalog specification is on the product page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation