04 MOQ & ordering

Chitosan: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Chitosan

On this page
  1. Why the minimum is 1 kg
  2. Packs and formats
  3. Lead time and dispatch
  4. What a quotation needs
  5. The sample is a lot, not a demonstration
  6. Terms to settle before the first order

The MOQ for chitosan is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the 80 mesh powder, and flakes are quoted as a separate pack. A firm quotation needs the source, the deacetylation method, the viscosity conditions, the quantity and pack, the destination and the intended use.

In one line

One kilogram is the smallest order because deacetylation and viscosity are lot properties, and a lot has to be sampled, tested and traced before it can be qualified.

Why the minimum is 1 kg

A 1 kg pack covers a bench trial, a retained sample and an independent test. That last part matters more for chitosan than for a crystalline ingredient: a viscosity check consumes a prepared solution, the deacetylation titration consumes another portion, and a referee laboratory may ask for a third. A pack that is too small to be tested twice is not a qualification sample.

Chitosan is also a light powder, so 1 kg fills a pouch of roughly two to three litres and travels as a parcel rather than on a pallet. Below 1 kg, the material is usually split from a larger lot and repacked, which adds handling and breaks the link between the pack, the lot code and the certificate without changing the polymer. The 25 kg drum is the bulk unit for production; it reduces handling per kilogram but commits inventory and a longer storage period.

The minimum is a pack decision, not a volume discount. It exists so that the first delivery can be sampled and traced, not to make a trial expensive.

Packs and formats

Standard chitosan packs
PackNet weightFormTypical useNotes
Foil pouch1 kg80 mesh powderTrial, sample, small batchMoisture barrier; reseal after opening
Foil pouch1 kgFlakesStock solutionsSlower hydration; soak overnight
Fiber drum25 kg80 mesh powderProductionInner liner; lot code on drum and liner
Fiber drum25 kgFlakesProduction solutionsLiner is the moisture barrier
Custom meshOn requestPowderFlow or dispersion controlParticle-size line changes

The catalog form is an 80 mesh powder: ≥95% through 80 mesh. A coarser or finer cut is a different specification, not a packing choice, because it moves the particle-size line and can move the lead time. The same applies to flakes: they are the same polymer at a different physical form, and a customer who needs a specific hydration behaviour should say so before the quotation.

Lead time and dispatch

The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A custom mesh, a flake pack or a non-standard quantity adds time, and the quotation should state it separately.

Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch as a parcel, and the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it, because the certificate and the allergen statement are part of the delivery.

What a quotation needs

Six items make a quotation firm enough to compare:

  1. Material and source. Chitosan, CAS 9012-76-4, with shrimp, crab or fungal source named.
  2. Specification. Deacetylation and its method; viscosity and its conditions; moisture, ash and insoluble matter; mesh; heavy metals and microbiology.
  3. Quantity and pack. 1 kg pouch, 25 kg drum, flakes or a custom mesh.
  4. Destination and Incoterm. The country, the port or address, and the trade term.
  5. Documents. COA, specification, SDS, and the source or allergen statement the importer needs.
  6. Intended use and market. Supplement, food or another use, and the market where it will be sold.

A quotation without the source and the viscosity conditions is incomplete. The same deacetylation figure can describe two powders that behave differently in a mixer, and the allergen statement depends on the source rather than on the certificate.

The sample is a lot, not a demonstration

The 1 kg pack is the qualification sample. Test deacetylation, viscosity, moisture, ash, insoluble matter and microbiology before scaling, and keep a retained sample from the same pack. Run the viscosity test on a freshly prepared solution under the contract conditions, because a solution that has stood for a day gives a lower figure and the difference will be read as a supplier failure.

If the project needs less than a kilogram for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. A bench sample and the production drum need not come from the same lot, and the certificate that travels with each should say which lot it covers.

Terms to settle before the first order

The quotation sets out the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period, the referee laboratory and the change-control route. A source change from shrimp to crab, or from shellfish to fungal, is a change control even when the two certificates look alike, because the allergen statement moves with it.

Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask who pays for the referee test and which laboratory is acceptable to both sides.

The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the source and allergen file; the chondroitin sulfate page shows a companion specialty with its own source documents; the quality page describes the release workflow.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation