Specialty Nutrients · Specialty
Chitosan
(C₆H₁₁NO₄)ₙ · CAS 9012-76-4 · Deacetylated chitin, powder or flakes
Chitosan specified by degree of deacetylation and viscosity, with moisture, ash and insoluble matter; the source and the food-grade route are part of the specification.
- Degree of deacetylation
- ≥85%
- Minimum order
- 1 kg
- Indicative lead time
- 1–7 days
- Standard packing
- 1 kg foil pouch25 kg fiber drum
Specification
What the certificate will report
| Degree of deacetylation | ≥85% (titration) |
|---|---|
| Viscosity (1% in 1% acetic acid) | 50–200 mPa·s |
| Appearance | Off-white to pale yellow powder or flakes |
| Moisture | ≤10.0% |
| Ash | ≤1.0% |
| Insoluble matter | ≤1.0% |
| Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Particle size | ≥95% through 80 mesh |
| Chemical formula | (C₆H₁₁NO₄)ₙ |
| CAS | 9012-76-4 |
| Marker set | Chitosan ≥85% deacetylated |
| Appearance | Off-white to pale yellow powder or flakes |
| Solubility | Soluble in dilute acetic acid; insoluble in water and in neutral or alkaline solutions. |
Primary method Titration and viscometry — the method behind each figure matters as much as the figure. How the COA is built →
Technical documentation
Six documents, one standard.
Quality, procurement and regulatory pages for Chitosan. Each card opens the full document; a sample COA and the technical data sheet are available on request.






What to confirm before ordering
- Degree of deacetylation and viscosity are the two figures that decide the application; a single 'chitosan' name does not.
- Confirm the source (shrimp, crab or fungal) and the food-grade route; the allergen statement follows the source.
- Check the destination market's status before quoting; chitosan is not authorized as a novel food in every market.
- Do not use the page as a label or a claim.
Buyer questions
Practical answers
What is Chitosan specified to?
Degree of deacetylation: ≥85% (titration). The full specification adds Viscosity (1% in 1% acetic acid), Appearance, Moisture, Ash, Insoluble matter and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which form of Chitosan is this?
The catalog grade is Deacetylated chitin, powder or flakes. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.
Which dosage forms does this grade fit?
Capsules and tablets, Powder blends. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the crystallisation system
- Specification comparison against the specification you sent
What this page does not claim
Chitosan is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.
Next step
Send the spec. We will confirm the form.
A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.