02 Grade comparison

Beta-glucan grades: yeast, oat and mushroom are different materials

Technical document 02 · Reviewed 2026-11-19 · Beta-Glucan

On this page
  1. Why beta-glucan is not one grade
  2. The grade families side by side
  3. Dispersion, viscosity and the powder in the mixer
  4. Choosing a grade for the dosage form
  5. What to write into the specification
  6. When the yeast grade is the wrong choice

β-Glucan is a family name, not a specification. Yeast β-1,3/1,6-glucan, oat β-1,3/1,4-glucan and mushroom β-1,3/1,6-glucan share a glucose backbone but differ in linkage, solubility, assay response and the claim that can be made. The catalog grade here is the yeast-derived 1,3/1,6 material at ≥70% by enzymatic assay.

In one line

The source and the linkage are the grade: they decide the assay, the viscosity and the claim before the percentage does.

Why beta-glucan is not one grade

The name describes a polymer of glucose joined by β-glycosidic bonds. It does not describe which carbons carry the bond. A β-1,3 chain with β-1,6 branches, a mixed β-1,3/1,4 chain and a β-1,4 cellulose chain are all β-linked glucans, and they behave differently in water, in an assay and in a regulatory file. The generic CAS number 9041-22-9 and the formula (C6H10O5)n do not narrow the choice.

A purchase order that names “β-glucan 70%” has therefore not specified the material. It has named a family and a number. The source, the linkage and the method have to be written beside that number before the specification is complete.

The grade families side by side

β-Glucan families and what changes between them
SourceMain linkageCommercial formWhat it changes
Yeast, Saccharomyces cerevisiaeβ-1,3 backbone with β-1,6 branchesCell-wall extract; ≥70% by enzymatic assayProtein, ash, colour, dispersion; the catalog grade
OatMixed β-1,3/1,4Soluble fibre concentrateViscosity, water solubility, cereal claim
BarleyMixed β-1,3/1,4Soluble fibre concentrateSame linkage family as oat, separate source record
Mushroomβ-1,3 with β-1,6 branchesFungal extract, often chitin-associatedChitin, protein, insolubles; allergen and source record

The table is a map, not a ranking. Each family has its own specification and its own analytical method. A yeast result and an oat result can both read “70%” and still describe different polymers, different methods and different claims.

Dispersion, viscosity and the powder in the mixer

Yeast β-glucan is dispersible in water and forms a viscous suspension at higher concentrations; it is not a clear soluble fibre. The cell-wall particles swell and settle, so a drink or a stick pack needs a dispersion step and, often, a suspending agent. Oat β-glucan is the soluble, viscous family: a small concentration thickens water noticeably, and that viscosity is part of its functional and regulatory story. Mushroom extracts can carry chitin, which is insoluble and settles hard.

Granulation changes flow, dust and bulk density, not the β-glucan content. Particle size matters for capsule filling and for dispersion in a stick pack, and it belongs in the specification beside the assay. A coarse granule that flows well can be the right choice for a capsule line and the wrong choice for a drink mix that must suspend quickly.

Choosing a grade for the dosage form

Capsules and tablets are filled by weight, so the fill has to be sized from the β-glucan figure. At ≥70% on an as-is basis, a 500 mg fill delivers at least 350 mg of β-glucan; to declare 500 mg of β-glucan, the formulator needs about 715 mg of powder at 70%. The arithmetic is not a dose recommendation; it is the conversion that keeps the label, the fill weight and the assay in agreement.

Check the basis before using the factor. A 70% result on the dried basis is not 70% of the powder as weighed when the moisture is 6.0%; convert with the moisture first, then size the fill. For a stick pack or a drink mix, the grade also has to disperse and stay suspended, so the particle-size line and the viscosity of the finished drink belong in the trial.

The claim follows the source, not the percentage. The EU claim associated with β-glucans is written for oat and barley β-glucan and a defined daily intake; a yeast 1,3/1,6 ingredient does not inherit that wording. The yeast versus oat comparison sets out the linkage and claim consequences in full.

What to write into the specification

  • “Yeast-derived β-1,3/1,6-glucan, CAS 9041-22-9, (C6H10O5)n, from Saccharomyces cerevisiae.”
  • “β-Glucan ≥70% by the named enzymatic method; state as-is or dry basis.”
  • “Moisture ≤6.0%; ash ≤3.0%; protein ≤5.0%.”
  • “Identification by enzymatic and HPLC methods conforming to the reference.”
  • “Heavy metals and microbiology as listed; particle size agreed for the dosage form.”
  • “No added maltodextrin, glucose or other carrier unless declared and quantified.”

The last line is not decoration. A carrier can lift the powder mass and dilute the β-glucan without changing the appearance, and the assay will show it only if the method counts the carrier as glucose or if the sugar profile is read. Name the carrier or exclude it in the specification.

When the yeast grade is the wrong choice

Choose another family when the claim depends on oat or barley β-glucan, when the formula needs a soluble fibre rather than a cell-wall dispersion, or when the market file names a different source. Those are different materials, not alternative packs of the same powder. The reverse is also true: an oat concentrate is not a drop-in for a yeast cell-wall product in a capsule, because the mass, the dispersion and the claim all move.

We supply the yeast-derived 1,3/1,6 grade. Catalog figures are on the beta-glucan hub; the COA page shows how the assay is reported; the compliance page explains the claim framework; the chitosan page offers a parallel for another cell-wall or shell-derived polymer; the methods library describes the assays; the quality page covers the release workflow.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation