05 Compliance

Where lactoferrin is permitted, and what the file must show

Technical document 05 · Reviewed 2026-11-19 · Lactoferrin

On this page
  1. The three frameworks
  2. The European Union
  3. The United States
  4. The contaminant limits
  5. Where the claims stop
  6. The documents a file needs
  7. The release checklist

Bovine lactoferrin reaches the EU, the US and the UK as a food supplement ingredient, and the permission itself is usually settled well before a purchase order. What decides a launch is the file that travels with the lot: the milk allergen, the contaminant panel, the label and claim wording, and the documents that name the bovine source.

In one line

Bovine lactoferrin is sold in the EU, the US and the UK as a food supplement ingredient; what decides the launch is the milk allergen, the contaminant panel and the documents that name the bovine source.

The three frameworks

The three markets do not ask the same question. In the EU, a lactoferrin for food supplements sits under Directive 2002/46/EC and the general food law around it, and the practical question is whether the material is authorised or has a history of use. In the US, it is a dietary supplement ingredient under DSHEA, and the question is whether it was marketed before 1994, whether it is covered by a GRAS conclusion for the intended use, or whether it has a new dietary ingredient notification. In the UK, retained food supplements legislation applies with its own amendments, and the EU-derived allergen and contaminant rules still shape the file.

For a specific isolate, check the current EU novel food catalogue and the supplier's regulatory basis rather than assuming that a protein with a long history in milk is outside the novel food regulation. The isolate, the production process and the intended use are what the assessment looks at, and the position can change. This page describes the framework as of this review; the current text of each instrument decides.

The European Union

Lactoferrin is not a vitamin or a mineral, so the Annex I list of permitted nutrient sources in Directive 2002/46/EC does not decide whether it can be used. The food ingredient route does, together with the novel food status of the specific material. The supplier should be able to state which route the material is sold under and which documents support it.

Milk is in Annex II of Regulation 1169/2011, so the word milk has to appear in the ingredient list, emphasised, and a “may contain” statement is not a substitute for declaring an ingredient that is present. Regulation 2023/915 sets the contaminant limits, and Regulation 1924/2006 governs any claim made for the finished product. The EU regulatory note carries the current references.

The United States

A dietary supplement containing lactoferrin is made under 21 CFR 111 and labelled with a Supplement Facts panel, and it carries the milk allergen declaration required by FALCPA. Milk is a major food allergen, so the “Contains” statement or the ingredient-list emphasis has to name it; a supplier's allergen statement should match the label wording the customer will use.

The ingredient basis is the part buyers miss. A pre-1994 dietary ingredient, a GRAS conclusion for the intended use and an NDI notification are three different routes, and the customer's own filing depends on which one applies. The supplier should say which, in writing. Proposition 65 is a separate exposure warning that can apply to lead even where the federal rules do not set a limit. The US regulatory note sets out the route in more detail.

The contaminant limits

Contaminant and microbiology limits · catalogue values against the market reference
ParameterCatalogue limitReference
Lead≤3 mg/kgEU 3.0 mg/kg for food supplements; US Prop 65
Arsenic≤2 mg/kgNo harmonised EU supplement limit; member-state rules
Cadmium≤1 mg/kgEU 1.0 mg/kg for food supplements
Mercury≤0.1 mg/kgEU 0.10 mg/kg for food supplements
Total aerobic count≤1,000 cfu/gContractual; no harmonised EU supplement limit
Yeast and mould≤100 cfu/gContractual release criterion
E. coliAbsentContractual release criterion
SalmonellaAbsentContractual release criterion

The catalogue limits are the values the certificate is written against. The heavy-metal limits sit at the EU maximum levels for food supplements, which means a lot that meets the catalogue limit is at the line rather than below it; a customer who wants margin should specify a tighter internal limit. Microbiology for food supplements is not harmonised in the same way, so the counts are contractual and belong in the specification. The heavy metals glossary entry explains how the panel is reported.

Where the claims stop

In the EU, a health claim may be used only if it is in the authorised register under Regulation 1924/2006, and the wording and the conditions of use have to match the entry. A structure or function claim that is not authorised is not made permissible by adding a disclaimer. In the US, structure or function claims are allowed with the DSHEA disclaimer, and disease claims are not allowed at all. The UK applies retained equivalents.

This site makes no physiological claim for lactoferrin. The pages describe identity, composition, process behaviour and documents, and a finished product that carries a claim needs its own substantiation and its own review. The label term “iron saturation” is a specification term rather than an authorised claim, and it should be defined on the specification so that the number on the pack and the number on the certificate mean the same thing.

The documents a file needs

  • The specification, with protein, iron saturation, moisture, ash, pH, mesh, metals and microbiology, each with its method.
  • The batch COA for the lot, with the same parameter set and the lot number.
  • The technical data sheet and the storage and shelf-life statement for the pack.
  • The milk allergen statement, matching the label wording used in the destination market.
  • The origin and species declaration: bovine, and the milk source.
  • A TSE/BSE statement covering the bovine source, even though milk is not a specified risk material.
  • The contaminant and microbiology reports, and a stability summary for the grade and pack sold.
  • A third-party report where the customer's market or own procedure requires one.

The release checklist

  1. Does the COA name the lot, the grade and the iron saturation band?
  2. Is the protein figure accompanied by its factor and basis?
  3. Is the iron saturation accompanied by the iron method and the capacity assumption?
  4. Does the allergen statement name milk in the wording the label will use?
  5. Do the heavy metals sit inside the catalogue limits, and does the customer want a tighter internal limit?
  6. Is the ingredient basis for the destination market stated in writing?
  7. Do the pack, the COA and the retained sample carry the same lot number?

The MOQ and ordering page shows how these documents attach to an order, and the identity page shows which tests support the source statement. The UK position is summarised in the UK regulatory note, and the catalogue is on the product page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation