01 COA & batch testing

The zinc sulfate heptahydrate COA, read line by line

Technical document 01 · Reviewed 2026-11-19 · Zinc Sulfate

On this page
  1. Reading the certificate as a test report
  2. The basis: as-is, dried, or as the heptahydrate
  3. The limit and the measured result
  4. Batch-to-batch variation
  5. When an outside test is worth ordering
  6. Comparing certificates between suppliers

The certificate for a zinc sulfate heptahydrate lot reports appearance, identification, assay by complexometric titration, elemental zinc, water by Karl Fischer, the heavy-metal panel, microbiology and particle size. Each line needs its method, a release limit and a measured result. On this salt the water is not an impurity: 43–46% is the heptahydrate's crystal water, and it fixes how much zinc a gram of powder actually carries.

In one line

On a heptahydrate the water is part of the molecule, so the assay, the zinc figure and the 43–46% water line have to be read together.

Reading the certificate as a test report

A certificate is auditable when every parameter has three parts: what was measured, the method that produced the number, and the limit the lot was released against. A row that reads only “conforms” gives a verdict without the measurement. For a hydrate, the rows that decide the reading are zinc, water and assay, in that order.

Identity, assay, water and contaminants · zinc sulfate heptahydrate
ParameterMethodRelease limit
AppearanceVisualColourless crystals or white powder
IdentificationIR and titrationConforms to the reference
Assay (as heptahydrate)Complexometric titration (EDTA)99.0–101.0%
ZincComplexometric titration22.0–23.0%
WaterKarl Fischer43.0–46.0%
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent
Particle sizeSieve analysis≥95% through 40 mesh

The appearance line is the weakest check: a white powder can be the heptahydrate, the monohydrate, the anhydrous salt or a dilution. Colour is useful when it is wrong — a yellow or brown tint points to iron — while the assay may still pass.

The basis: as-is, dried, or as the heptahydrate

The molecular weight of ZnSO4·7H2O is 287.55, of which 65.38 is zinc, 96.06 is sulfate and 126.11 is water. That gives 22.74% zinc, 33.41% sulfate and 43.86% water, and a conversion factor of 287.55 ÷ 65.38 = 4.398 between the zinc figure and the assay expressed as heptahydrate. A 22.5% zinc result is 98.9% heptahydrate; a 100.5% assay contains 22.85% zinc. The two lines are the same measurement on two scales.

The basis has to be printed in the assay row. “99.0–101.0%” on a hydrate is normally as-is: the crystal water is part of the molecule. On the dried basis the water is divided out, and a lot can read 100% while its zinc per gram is low. The certificate should state the basis and report the water result beside it.

Water has a legitimate range. 43.0% means some crystal water has been lost and the zinc per gram rises; 46.0% means surface moisture has been picked up and it falls. The water line is a specification line and a storage indicator at once.

The limit and the measured result

The limit is the boundary against which the lot was accepted; the measured figure is what the laboratory found. A result column that repeats the specification range has not reported a result. The table maps each parameter to what its result column should show.

What the result column should contain
ParameterRelease limitResult column
Assay99.0–101.0% as heptahydrateA measured percentage, with the basis and the method
Zinc22.0–23.0%A measured percentage by titration
Water43.0–46.0%A measured percentage by Karl Fischer
Heavy metalsPer elementA measured figure in mg/kg for each element
MicrobiologyCounts and absenceThe count and the absence statement for the lot
Particle size≥95% through 40 meshThe measured percentage through the sieve

Two checks catch most certificate errors before a sample is opened. First, convert the zinc result to the heptahydrate scale and compare it with the assay: a gap beyond the method uncertainty means a basis or method problem. Second, add zinc, sulfate and water: on a pure heptahydrate they approach 100%, and a gap of several points suggests a different hydrate, a dilution or an unlisted impurity.

Batch-to-batch variation

Crystallisation and drying move the water first. A drier product has more zinc per gram and a higher assay on the as-is basis; a product that has taken up moisture has less. Crystal size and milling then move the particle-size result, and the 40 mesh figure can change when the mill or the sieve changes without any change in the chemistry.

Iron is the impurity that shows on the appearance line. A change of zinc feed or purification can leave a yellow or brown cast that the assay does not report; the heavy-metal panel is the quantitative check, and the colour is the early signal.

Moisture also moves the flow: a caked lot usually fails the sieve test as well, so read the water and particle-size results together. The certificate's lot code should tie back to the pouch or drum and to the retained sample.

When an outside test is worth ordering

An independent test is worth ordering for a new source, a first regulated-market shipment, an unproven hydrate claim or a contested result. The panel is not a full repeat: EDTA titration for zinc, Karl Fischer for water, ion chromatography or gravimetric sulfate, ICP-MS for the heavy metals, microbiology, and IR or XRD when the hydrate is in question.

Require a detection limit beside every screen; “not detected” with no limit says something about the assay, not the lot. The sample tested should be the one kept for retention; the report should name the lot; a contested result should go to a joint re-test. A single summed heavy-metal figure hides the element that matters, so ask for the individual results.

Comparing certificates between suppliers

Line up six items: hydrate and CAS number, zinc and water results, assay with its basis, heavy metals and microbiology, particle size, and pack with lot code. Two quotations can agree on zinc and still describe different powders if the hydrate differs: the same 22.5% zinc means one thing as a heptahydrate and another as a blend.

Traceability is the next question. The certificate should identify the manufacturer, the zinc feed and purification route, and the drying and milling steps. The zinc sulfate product page carries the catalog specification. The tests that separate the hydrates are on the identity page; the grade comparison is on the grades page; the titration and water methods are described in the analytical methods library; the release workflow is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation