Building the zinc sulfate regulatory file
Zinc sulfate is a source of elemental zinc, so the regulatory file is built around the zinc dose and the route the destination allows, not around the salt name alone. The buyer's regulatory team confirms the route for the finished product in its market. This page names the instruments to check, the contaminant and label figures that belong in the file, and the documents that should travel with the lot.
A zinc sulfate file is a route question first: which zinc source the destination allows, at what dose, and how the label declares the elemental zinc.
What the file has to answer
A complete file should settle four points. What exactly is being bought, and which specification revision applies? Which lot does the certificate cover, and what did it measure? Which route, limits and label rules govern the finished product where it will be sold? What is the change-control route if the source, process or pack changes? The COA covers the lot, the TDS the specification and the SDS the handling; none establishes the route by itself.
For a mineral salt the route question has two layers. The first is the substance: whether the destination list includes zinc sulphate as a source of zinc for the intended category. The second is the finished product: the dose, the label, the claims and the contaminant calculation. The file should carry version numbers, because an undated certificate and an undated specification cannot be compared.
European Union
In the EU, zinc sulphate appears in Annex II to Directive 2002/46/EC, the list of vitamin and mineral substances permitted in food supplements, as of this review. The buyer's regulatory team confirms that the entry and its conditions cover the finished product. General food law (Regulation (EC) No 178/2002), labelling (Regulation (EU) No 1169/2011) and the contaminant regulation (Regulation (EU) 2023/915) apply alongside the supplement directive.
The labelling file uses the nutrient reference value for zinc, which is 10 mg per day in Annex XIII to Regulation (EU) No 1169/2011. The nutrition declaration gives the zinc mass per portion and the percentage of that reference value. The ingredient list names the source; “zinc sulphate” is the name the buyer's reviewer checks against the destination language version.
The contaminant file is a finished-product calculation. The maximum levels for lead, cadmium and mercury apply to the supplement as sold, and the calculation has to show that the daily dose stays inside them. The current text and any category exception are checked at the time of the order.
United States
In the United States, 21 CFR 182.8997 lists zinc sulfate as generally recognized as safe when used in accordance with good manufacturing practice, and it is used as a nutrient supplement, as of this review. The finished product is marketed under the dietary-supplement route, with its own labelling and GMP requirements. The buyer confirms that the ingredient, the dose and the label fit that route.
The Supplement Facts panel declares “Zinc (as zinc sulfate)” in elemental zinc, with the percentage of the daily value. The daily value used on the panel is 11 mg for adults and children four years and older, as of this review. The panel is built on the elemental figure, so the hydrate belongs in the specification and the certificate, not in the supplement facts.
Structure/function statements are reviewed by the brand and carry the required disclaimer; disease claims are not made. The label review is separate from the certificate, and a certificate does not approve a claim.
Contaminants and the zinc dose
Contaminant limits apply to the finished product, so a drum result is only the input. Use the table as a checklist, then apply the current text and the daily dose.
| Parameter | Typical supplement reference | What the file should show |
|---|---|---|
| Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation |
| Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies |
| Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method |
| Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate |
| Zinc dose | Destination upper limit for the age group | The elemental zinc per daily portion and the check against that limit |
Zinc has a tolerable upper intake level in the markets that set one. In the United States the adult level is 40 mg per day from all sources, as of this review; the European Food Safety Authority set 25 mg per day for adults in its re-evaluation, with lower values for younger age groups. The figure is checked in its current form and against the age group on the label. The salt weight is not the dose; the elemental zinc is.
Label wording and claims
The label names the material, the elemental zinc mass and the source in the form the destination requires. A nutrient content claim such as “source of zinc” needs 15% of the nutrient reference value in the portion, which for a supplement is the daily dose; “high” needs 30%. At the EU reference value of 10 mg, those thresholds are 1.5 mg and 3.0 mg of zinc. The brand's reviewer checks the current annex and the conditions before the wording is used.
Health claims are a separate file. The EU register of authorised claims sets the permitted wording and the conditions for zinc; the brand selects a wording that is on the register and keeps the evidence with the label. In the United States, a structure/function statement needs the disclaimer and must not be a disease claim.
Documents that belong in the file
- Specification with the hydrate, CAS number, assay basis, zinc range and water range.
- COA for the lot, with individual heavy-metal results and the microbiology panel.
- Technical data sheet and safety data sheet.
- Allergen and GMO statements, origin record and a packaging declaration.
- Contaminant calculation for the finished product and the daily dose.
- Label artwork and claim review, with the destination and the date of the review.
- A change-control record covering source, process and pack.
Any missing statement should be named before the order rather than discovered at the port. Version numbers on the list are worth more than a folder of undated files. Catalog data is on the product hub; the COA page explains the lot certificate; the identity page covers the analytical evidence; the quality page describes the release file; the analytical methods library covers the test methods.
Pre-order checklist
- The specification revision, hydrate and CAS number are stated.
- The destination route and the finished-product category are confirmed by the buyer.
- The elemental zinc per daily portion is checked against the destination's upper limit.
- Contaminant figures are recalculated for the daily dose of the finished product.
- Label, nutrient declaration and claim wording have had a destination review.
- Source, process and pack sit under change control, and every document carries a version.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation