02 Grade comparison

Zinc lactate trihydrate, anhydrous or milled: choosing a grade

Technical document 02 · Reviewed 2026-11-19 · Zinc Lactate

On this page
  1. Why the hydrate comes first
  2. The grade options side by side
  3. Solubility, taste and handling
  4. What the dosage form can carry
  5. How to write the specification

Zinc lactate is sold as the trihydrate, with 17.0–19.0% water and 21.0–23.0% zinc, and that is the catalogue grade. An anhydrous salt, a milled powder and a granulated powder are separate specifications: they change the zinc per gram, the flow, the dust and the fill weight. The grade decision starts with the dosage form and the label, not with the assay.

In one line

The hydrate and the mesh are specification decisions: the trihydrate, the anhydrous salt and a milled or granulated powder carry different zinc per gram and behave differently in the line.

Why the hydrate comes first

Zinc lactate trihydrate has the formula C6H10O6Zn·3H2O and a formula weight of about 297.6. Three water molecules are 18.16% of that mass, and the zinc is 21.97%. The anhydrous salt has a formula weight of about 243.5 and carries 26.85% zinc, so a gram of the anhydrous material supplies about 22% more zinc than a gram of the trihydrate. That difference moves the fill weight and the label arithmetic before any other property is considered.

The trihydrate is the catalogue form because the specification describes a stable, free-flowing solid. The anhydrous salt is a separate material: its own water limit, its own flow behaviour, and a stronger pull toward atmospheric moisture. It is not a drop-in, and a formula qualified on the trihydrate cannot move to it at the same mass without recalculating zinc and rechecking the blend.

The grade options side by side

Zinc lactate forms and particle profiles · what changes in the pack
FormZinc figureWaterBehaviourFits
Trihydrate, 40 mesh (catalogue)21.0–23.0%17.0–19.0%Soluble; free-flowing crystalline powderCapsules, tablets, sticks, blends
Trihydrate, milled to 80 or 100 meshUnchanged from 40 meshUnchanged from 40 meshFiner, more dust, faster dissolutionCapsules, suspensions, gummies
Trihydrate, granulatedUnchanged from 40 meshUnchanged from 40 meshCoarser, better flow, less dustTablets, sachets, high-speed lines
AnhydrousAbout 26.9% theoreticalOwn limit; lower than the trihydrateDifferent solid; picks up waterDry systems where the water is unwanted

Rows one to three are the same salt at three particle profiles. Milling or granulation shifts the distribution, the flow and the dust; neither touches the zinc or the water. A mesh change cannot explain a zinc result on a certificate. The anhydrous row is a different chemical specification, with its own label name and water limit.

Solubility, taste and handling

Zinc lactate dissolves in water and gives a slightly acidic solution. That places it between zinc citrate, which is only slightly soluble and forms a suspension, and zinc gluconate, which dissolves freely and gives a solution close to neutral. The difference matters in a clear drink or a stick pack: the lactate can disappear at a useful zinc concentration where the citrate would leave a dispersion, while the gluconate has the widest solubility margin. The zinc citrate and zinc gluconate pages carry those comparisons.

The taste belongs to the zinc, not the lactate: a metallic or astringent note grows with concentration, and the acidic anion can read as faintly tart in a low-sugar recipe. The 40 mesh powder is white, crystalline and free-flowing. A finer mill dissolves more quickly but throws more dust; a granulated grade flows more evenly but may bring a binder that must appear on the label. Trial the grade at the real zinc concentration, in the real matrix, before the artwork is fixed.

What the dosage form can carry

Fill weight comes from dividing the declared elemental zinc by the salt's zinc fraction. At 22.0% zinc, 10 mg of zinc takes about 45 mg of trihydrate; 15 mg takes about 68 mg, 25 mg about 114 mg, and 50 mg about 227 mg. These are planning figures. The lot certificate supplies the assay and zinc result for the final calculation.

Trihydrate mass for a zinc label claim · planning figures at 22.0% zinc
Elemental zincZinc lactate trihydrateWhat it means in the line
10 mgAbout 45 mgSmall capsule or a low-dose stick
15 mgAbout 68 mgTypical capsule fill with room for excipients
25 mgAbout 114 mgTablet or a larger capsule
50 mgAbout 227 mgA large capsule or a divided stick pack

A capsule or tablet takes the mass easily, so the citrate's extra zinc per gram is not needed to make the dose fit. A stick pack or drink mix is where solubility earns the lactate its place, with the taste trial deciding whether the acid note suits the flavour. In a gummy, water activity and pH outweigh the mesh, and the lactate's acidity has to be balanced in the recipe.

How to write the specification

  • “Zinc lactate trihydrate, CAS 16039-53-5, C6H10O6Zn·3H2O.”
  • “Assay 98.0–102.0% by complexometric titration; basis named on the certificate.”
  • “Zinc 21.0–23.0%; water 17.0–19.0% by Karl Fischer.”
  • “Identification by infrared and titration; lactate identity by HPLC where the anion is disputed.”
  • “Sieve: ≥95% through 40 mesh; contaminants and microbiology per the panel.”
  • “Hydrate, mesh and any granulation named before the order.”

A custom mesh or a granulated grade is a different specification and may add lead time. The hydrate line is not optional: “zinc lactate” alone describes a family, and the trihydrate and the anhydrous salt are different powders with different labels. The product hub carries the catalogue line; the COA page shows how the zinc and water are reported; the stability page covers the pack; the methods library describes the titration; the quality page explains the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation