Minerals & Electrolytes · Core range

Zinc Gluconate

C₁₂H₂₂O₁₄Zn · CAS 4468-02-4 · Zinc gluconate, crystalline

Zinc gluconate specified at 97.0–102.0% on the anhydrous basis and 12.5–14.0% elemental zinc, for capsules and tablets where the gluconate salt and the taste profile matter.

Assay (anhydrous basis)
97.0–102.0%
Minimum order
1 kg
Indicative lead time
1–7 days
Standard packing
1 kg foil pouch25 kg fiber drum

Specification

What the certificate will report

Assay (anhydrous basis)97.0–102.0% (complexometric EDTA)
Zinc (Zn)12.5–14.0% (complexometric EDTA)
AppearanceWhite to off-white crystalline powder
IdentificationZinc and gluconate reactions conform
pH (10% solution)6.0–7.5
Loss on drying≤1.0%
Particle size≥95% through 80 mesh
Heavy metalsPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₁₂H₂₂O₁₄Zn
CAS4468-02-4
Marker setZinc (12.5–14.0%); assay 97.0–102.0% anhydrous
AppearanceWhite to off-white crystalline powder
SolubilityFreely soluble in water; the 10% solution is close to neutral (pH 6.0–7.5).

Primary method Complexometric EDTA titration — the method behind each figure matters as much as the figure. How the COA is built →

What to confirm before ordering

  • Name the salt: zinc gluconate, zinc citrate and zinc bisglycinate are different label ingredients.
  • Ask for the assay basis and the elemental zinc figure; the two are not interchangeable.
  • Zinc gluconate has a different taste and solubility profile from the citrate; trial the matrix.
  • Confirm the water content and the flow for the capsule or stick pack you will run.

Buyer questions

Practical answers

What is Zinc Gluconate specified to?

Assay (anhydrous basis): 97.0–102.0% (complexometric EDTA). The full specification adds Zinc (Zn), Appearance, Identification, pH (10% solution), Loss on drying and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which form of Zinc Gluconate is this?

The catalog grade is Zinc gluconate, crystalline. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.

Which dosage forms does this grade fit?

Capsules and tablets, Powder sticks and drink mixes, Gummies and chews. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the crystallisation system
  • Specification comparison against the specification you sent

What this page does not claim

Zinc Gluconate is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.

Next step

Send the spec. We will confirm the form.

A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.