04 MOQ & ordering

Zinc gluconate: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-18 · Zinc Gluconate

On this page
  1. Why the minimum is one kilogram
  2. Packaging
  3. Lead time
  4. What the quotation needs
  5. Samples
  6. Payment and terms

Zinc gluconate can be ordered from one kilogram: a foil pouch filled from a released lot, with that lot's certificate and a retained sample behind it. Production moves to the 25 kg fiber drum, and dispatch is confirmed at one to seven days once the grade, pack, quantity and destination documents are agreed. The minimum is a qualification quantity, not a retail pack.

In one line

One kilogram is a lot-linked trial pack, the 25 kg drum is the production unit, and the quotation follows the grade, the quantity and the destination.

Why the minimum is one kilogram

One kilogram lets a formulator work with the production material without committing to a drum. At 13.5% zinc it carries about 135 g of elemental zinc, which is roughly 13,000 capsules at a 10 mg claim before process loss, or about 2,700 at a 50 mg claim. That is enough for bench work, a short stability pilot and a small batch, and it is drawn from a lot that has already been released rather than from a sample bench.

The pack is the smallest unit that can be labelled and documented as a lot in its own right. If an order exceeds one kilogram, the packer keeps the same lot where the lot size allows; if it does not, a new lot is made and a new certificate is issued. The lot code on the pouch is the thread that connects the material to its certificate, retained sample and stability file.

Name the salt and the form in the first message. This catalogue line is the anhydrous gluconate, C12H22O14Zn, CAS 4468-02-4, at 97.0–102.0% assay on the anhydrous basis and 12.5–14.0% zinc, with loss on drying ≤1.0%. A hydrate or a different mesh is a different trial, and a sample of the wrong one will not qualify the label.

Packaging

Standard packs · zinc gluconate
PackUseNotes
1 kg foil pouchBench trials, stability pilots, small batchesFood-grade liner, heat-sealed; lot label on the pouch
25 kg fiber drumRoutine productionFood-grade liner, sealed; tamper-evident closure
PalletPalletised dispatchStretch-wrapped; lot labels visible on every drum

The liner belongs to the pack specification. A drum with an unsealed liner has been stored differently from the one that was studied, and the certificate does not record the difference. For a humid destination, ask for a desiccant and have the packing specification name it.

Every pouch and drum should show the product and form, the lot, the certificate reference, the net weight and the storage condition. Without a lot number the pack cannot be linked to a certificate, a retained sample or a stability file, and the material becomes unclaimable.

Lead time

Indicative dispatch is one to seven days after the specification and the order are confirmed. The clock starts when the grade, quantity, pack and documents are agreed; an enquiry against an open specification is not an order.

Four requests add time: a mill below the catalogue 80 mesh, a granulated grade, an outside test, and destination documents such as a certificate of origin or a translated label. Put any of them in the first message and the quotation can show the added days rather than discovering them at dispatch.

What the quotation needs

  1. The salt and form to be matched, or the specification you want to write.
  2. A first quantity and an annual estimate.
  3. The dosage form: capsule, tablet, stick, gummy or drink.
  4. The destination country and the documents it requires.
  5. The mesh and flow the line can run.
  6. The date the material has to be in production.

A competitor's certificate can start the conversation faster than a written specification, because it shows the methods and limits your quality team already uses. The reply can then be a counter-specification that states what can be matched and what cannot. Packing, freight and documents follow the destination, so commercial terms are set against the confirmed order rather than published as a list.

Samples

A sample comes from a released lot and travels with that lot's certificate; the quantity is agreed at enquiry. Without the certificate the trial cannot be linked to a lot record or repeated. Ask for the grade that will ship: an 80 mesh anhydrous powder does not represent a 100 mesh milled grade or a granulated one, and a taste trial on the wrong mesh is still a taste trial on the wrong powder.

If the sample is meant to qualify a process variant, request that variant. If it is meant to qualify a supplier, ask for the certificate and the retained-sample reference at the same time. Sample freight and documents are confirmed with the request, and a sample without its paperwork is a free powder rather than a qualification lot.

Payment and terms

Payment terms, Incoterm and the document list are set in the order confirmation. They depend on the destination, the order size and whether the account is new, so they belong in the quotation rather than in a published rule.

Any claim is assessed against the retained sample and the lot certificate. Report a damaged pack or a mismatch as soon as it arrives, with photographs of the carton and the lot label, before the material is used. Once the liner has been opened and the powder has been through a process, the retained sample is the only reference that still speaks for the lot.

The COA page lists the certificate fields, the stability page covers storage and the pack, and the retained-sample entry explains why the reference matters. Dispatch and documentation are described on the logistics page, and the product line is on the zinc gluconate hub.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation