05 Compliance

Where zinc gluconate is permitted, and what the file must show

Technical document 05 · Reviewed 2026-11-18 · Zinc Gluconate

On this page
  1. Four checks, not one
  2. European Union
  3. United States
  4. The contaminant table
  5. The claims boundary
  6. The document pack
  7. Before the first order

Zinc gluconate is a permitted zinc form for food supplements in the EU and the UK, and a dietary ingredient in the US. Permission is the entry ticket: the finished product still has to meet contaminant limits, carry the particulars and use permitted wording. The raw-material file has to show the form, the assay basis, the contaminants and the label arithmetic.

In one line

The form is permitted in all three markets; the file still has to prove the form, the contaminants at the finished dose, the label arithmetic and the claim wording.

Four checks, not one

Compliance separates into four questions that are often answered as one. Is the form permitted? Is the contaminant load acceptable at the real dose? Does the label carry the required particulars? Is every claim authorised? A permitted form answers only the first, and a certificate that passes the catalog answers none of them.

This page covers the raw material; the finished product, its dose and label copy belong to the brand.

The UK kept a parallel list: the permitted forms sit in the retained Annex II, and the Food Supplements (England) Regulations 2003 provide the domestic instrument. GB contaminant limits are retained; Northern Ireland follows the EU list.

European Union

Directive 2002/46/EC lists the vitamin and mineral forms that food supplements may use, and zinc gluconate appears in Part B of Annex II among the permitted zinc forms, as amended. The entry is permission, not a purity standard; it sets no dose and does not touch the contaminant, labelling or claim rules.

Contaminants fall under Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006. For food supplements it sets lead at 3.0 mg/kg, cadmium at 1.0 mg/kg and mercury at 0.10 mg/kg on the product as sold. There is no harmonised EU maximum for arsenic in supplements, so the ≤2 mg/kg figure in this catalog is a buyer limit.

Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars in Directive 2002/46/EC: the words “food supplement”, the nutrient name and amount per portion, the percentage of the reference value, the daily-dose warning, the keep-out-of-reach warning and the varied-diet statement. Zinc's reference value is 10 mg. Claims are authorised under Regulation (EC) No 1924/2006 and the Union Register; a “source of zinc” claim needs 15% of that value, or 1.5 mg, in the daily portion. National maximum levels and notification rules differ, so check the current text.

United States

Zinc gluconate is marketed in the United States as a dietary ingredient under DSHEA. There is no pre-market approval, but the seller has to show the basis: pre-15 October 1994 marketing, a GRAS conclusion, or a new dietary ingredient notification. The file should name the basis and hold the evidence.

The Supplement Facts panel is set by 21 CFR 101.36: elemental zinc per serving and the percentage of the Daily Value, 11 mg for adults and children four years and older. The ingredient list names the salt, so “zinc gluconate” and “zinc citrate” are not interchangeable even at the same zinc figure.

A structure/function statement must be truthful, substantiated and clear, with the DSHEA disclaimer required by 21 CFR 101.93, and the marketer must notify the FDA within 30 days of first marketing it. A disease-related claim is not permitted. The cGMPs in 21 CFR 111 require identity testing of the incoming ingredient.

There is no federal maximum for lead, arsenic, cadmium or mercury in supplements. California's Proposition 65 sets a 0.5 µg/day maximum allowable dose level for lead and a 15 µg/day no-significant-risk level; state rules, customer specifications and USP <2232> fill the gap.

The contaminant table

Contaminant ceilings for supplements · EU, US, UK and this catalog at this review
ElementEUUSUKCatalog
Lead3.0 mg/kg in the supplement as soldNo federal supplement limit; state rules apply3.0 mg/kg retained limit≤3 mg/kg
Cadmium1.0 mg/kgNo federal supplement limit1.0 mg/kg retained limit≤1 mg/kg
Mercury0.10 mg/kgNo federal supplement limit0.10 mg/kg retained limit≤0.1 mg/kg
ArsenicNo harmonised EU limitNo federal supplement limitNo harmonised GB limit≤2 mg/kg

The catalog limits for lead, cadmium and mercury are the EU finished-product ceilings, which leaves no headroom. The ceiling applies to the product as sold, so a supplement built mostly from this powder has nowhere to put a second contributor; a multi-mineral formula needs a tighter limit.

The finished dose changes the arithmetic. A 50 mg zinc claim needs about 360 mg of gluconate at 13.9% zinc, so a raw material at the 3 mg/kg lead ceiling delivers about 1.1 µg per serving if the salt is the only source — above California's 0.5 µg/day maximum allowable dose level. A high-dose product needs a tighter limit. At 10 mg zinc the powder mass is about 72 mg, and the same 3 mg/kg delivers about 0.22 µg. Microbiology is a buyer requirement in all three markets; the catalog applies APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and absence of E. coli and Salmonella.

The claims boundary

The EU and GB registers carry authorised zinc claims, which attach to the nutrient in the finished product, in the authorised wording and conditions. They do not attach to the raw material. In the US a structure/function statement belongs to the brand, with the DSHEA disclaimer. No market allows a disease-related claim.

This page does not reproduce claim wording, and nothing here is a health claim for zinc gluconate. A formulation statement such as “zinc gluconate is used in capsules” describes the material; the brand that prints a claim owns the wording.

The document pack

Documents that travel with a zinc gluconate lot
DocumentWhat it must showScope
Certificate of analysisLot, tests, methods, limits, results and basisEvery lot
SpecificationIdentity, assay basis, physical and contaminant limitsPer product
Technical data sheetForm, typical values, solubility, packing and storagePer product
Safety data sheetHazard, handling and transport informationPer product
Allergen and GMO statementsDeclarable allergens and GM statusPer product
Manufacturing flow and originSite, route and country of originPer supplier
CertificationQuality or food-safety certificate, if heldPer site

A certificate alone is not a file: the specification is what it is written against, and the statements are what the customer will ask for.

Before the first order

  • Form and CAS number named on the certificate and the label, with the anhydrous state declared.
  • Assay on the anhydrous basis, with the EDTA method and the loss-on-drying result beside it.
  • Zinc range stated, and the label arithmetic checked against the salt figure.
  • Contaminants and microbiology compared with the destination's limits at the real finished dose.
  • Label particulars complete: nutrient per portion, reference percentage and warnings.
  • Claims limited to authorised wording; no disease claim anywhere in the file.
  • Documents complete for the lot; retained sample under the same lot code.

The COA page shows where each figure sits, the identity page covers the tests behind the form, and the market summaries are in the EU, US and UK notes. The quality page describes the release file, and the catalogue line is on the zinc gluconate product page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation