01 COA & batch testing

What the COA for zinc citrate actually contains

Technical document 01 · Reviewed 2026-11-18 · Zinc Citrate

On this page
  1. The certificate as a list of tests
  2. What the zinc figure measures, and on what basis
  3. Release limit versus the result for the lot
  4. What moves between batches
  5. When to order an outside test
  6. What to compare between suppliers

For a zinc citrate lot, the certificate reports appearance, citrate identification, zinc by complexometric EDTA, loss on drying, pH, particle size, bulk density, heavy metals and microbiology. Every line should carry a method, a release limit and a result for that lot; the ranges below are the catalogue specification, not a batch result. The hydrate and the assay basis belong on the certificate beside the zinc figure, because zinc citrate dihydrate and the anhydrous salt are different powders.

In one line

A zinc percentage is a quantity, not an identity: the COA has to show the citrate test, the EDTA method, the drying basis and the limit the lot was released against.

The certificate as a list of tests

The document is easier to audit as a series of questions: what was measured, by which method, against which limit, and what did this lot return? The tables separate the chemistry and physical tests from the contaminant and microbiological panel.

Identity, assay and physical tests · zinc citrate dihydrate
ParameterMethodRelease limit
AppearanceVisualWhite to off-white powder
IdentificationCitrate reaction and infrared spectrumConforms to reference
Zinc (Zn)Complexometric EDTA titration31.0–32.5% on the dried basis
Loss on dryingGravimetric, 105 °C≤6.0%
pH (5% suspension)Potentiometry5.0–7.0
Particle sizeSieve analysis≥95% through 40 mesh
Bulk densityTapped cylinder0.50–0.85 g/mL
Contaminant and microbiological limits · zinc citrate dihydrate
ParameterMethodRelease limit
Lead, arsenic, cadmium, mercuryICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
Aerobic plate countPlate count≤1,000 cfu/g
Yeast and mouldPlate count≤100 cfu/g
E. coli and SalmonellaAbsence testsAbsent

What the zinc figure measures, and on what basis

The zinc line comes from a titration. Disodium edetate binds zinc in a 1:1 complex, the sample is buffered to about pH 10, and an indicator such as Eriochrome Black T turns at the endpoint. The volume of titrant gives the total zinc in the portion that dissolved. EDTA is the laboratory reagent here, not an ingredient, and it does not distinguish zinc that came from the citrate from zinc supplied by an oxide or another salt.

That is why the method and the basis have to sit next to the number. The catalogue range is 31.0–32.5% on the dried basis. A dried-basis result is corrected for the moisture measured by loss on drying; an as-is result includes that moisture. The dihydrate carries two water molecules in its lattice, about 5.9% of the formula, so most of the ≤6.0% drying limit is crystal water rather than free moisture. A lot near the top of the drying limit has little room left for water picked up in handling, and its as-is zinc figure will sit below its dried-basis figure.

Citrate identity is a separate block. The reaction step establishes that the anion behaves as citrate, and the infrared spectrum is compared with a reference for the carboxylate and hydroxyl bands. Both are identification tests, not assays: a blend that contains citrate can pass the reaction while carrying a second zinc source. Read the identity result together with the zinc figure, the drying result and the pH, not as a substitute for them.

The hydrate name belongs in the same block. Zinc citrate dihydrate is specified under CAS 5990-32-9; the anhydrous salt is a different solid with a different formula weight and more zinc per gram. A certificate that says only “zinc citrate” has left the reader to guess which one was released.

Release limit versus the result for the lot

The release limit is the acceptance boundary; the batch result is what the laboratory measured. Both belong on the certificate in separate columns, with the method named. A column that repeats the release range has not reported a measurement, and a certificate that reports only “conforms” for zinc cannot be trended against the next lot. This page does not reproduce a batch result: the batch COA confirms the numbers for a named drum.

Some lines are attributes rather than ranges. Identification is pass or fail against a reference, and the microbiological absence tests are pass or fail against the method. The heavy-metal panel is different again: each element has its own limit, and the useful result includes the laboratory's limit of quantification. A “less than” figure without that limit says more about the report than about the powder.

What moves between batches

Zinc and loss on drying move with the reaction, the crystallisation and the drying step. A low as-is zinc result with a high drying result can describe a wetter lot of the same salt; a high zinc result with a weak citrate identification points the other way, toward a second zinc source. pH moves with residual acidity and with the balance of citrate species, and particle size and bulk density move with milling and sieving rather than with the chemistry.

Colour and flow are qualitative and often more revealing than a single number. A grey or tan tint is a reason to check the drying record and the metal panel, because the assay can still pass. A trend across several lots, such as zinc drifting low or bulk density climbing, is more useful than one result near a limit. Ask for the batch record when the trend changes, not only for a fresh certificate.

When to order an outside test

An independent laboratory is worth using for a new source, a first shipment into a regulated market, a form claim that the supplier's certificate does not prove, or a disputed result. The panel should answer the open question rather than repeat the whole certificate: zinc by EDTA, citrate identity by reaction and infrared, water by loss on drying or Karl Fischer, the heavy-metal panel by ICP-MS, and X-ray diffraction where crystalline zinc oxide is the concern.

Ask the laboratory to report its detection or quantification limit for every trace and phase test. A “not detected” line without a limit is evidence about the method, not about the sample. Chain of custody matters as well: the sample tested should be the retained sample, and its lot code should match the certificate and the drum.

What to compare between suppliers

Six lines make a fair comparison: the hydrate and CAS number; the zinc result and its basis; the citrate identity method and reference; loss on drying; particle size and bulk density; and the contaminant and microbiological panel. Two quotations that agree on zinc but differ on the other five are not describing the same powder.

Traceability is the second layer. The lot code should be identical on the certificate, the pack label and the retained sample, and the certificate should name the manufacturing site, the date of release and the person who signed it. A certificate can be genuine and still describe a drum other than the one delivered. The zinc citrate product page carries the catalogue specification; the grade page explains the salt and hydrate choice; the identity page sets out the tests behind the citrate claim; the quality page describes the release record. The titration itself is described in the complexometric method note.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation