04 MOQ & ordering

Zinc citrate: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-18 · Zinc Citrate

On this page
  1. Why the minimum is one kilogram
  2. Packaging
  3. Lead time
  4. What the quotation needs
  5. Samples
  6. Payment and terms

Zinc citrate can be ordered from a single kilogram: a foil pouch filled from a released lot, with that lot's certificate packed alongside. Production quantities move to the 25 kg fiber drum. Once the hydrate, quantity, pack and destination documents are fixed, dispatch is confirmed at one to seven days.

In one line

One kilogram qualifies the grade, the 25 kg drum runs production, and the quotation is built from the grade, quantity, destination and documents.

Why the minimum is one kilogram

One kilogram is a qualification quantity, not a stock position. It covers early formulation work, a short stability pilot and a small production batch, and it is drawn from a lot that has already been released. The point is to test a released lot of the production material, with a certificate that can be traced to the pouch.

The minimum is not a volume cut-off. It is the smallest pack that can be labelled and documented as a lot in its own right. If an order exceeds one kilogram, the packer keeps the same lot where the lot size allows; if it does not, a new lot is produced and a new certificate is issued.

State the hydrate in the first message. This catalogue line is zinc citrate dihydrate at 31.0–32.5% zinc on the dried basis. The anhydrous salt has a different zinc per gram and a different drying profile, and a trial on the wrong one will not qualify the label.

Packaging

Standard packs · zinc citrate dihydrate
PackUseNotes
1 kg foil pouchFirst trials and bench workFood-grade liner, heat-sealed; lot label on the pouch
25 kg fiber drumRoutine productionFood-grade liner, sealed; tamper-evident closure
PalletPalletised dispatchStretch-wrapped; lot labels visible

The liner belongs to the pack specification. A drum with an unsealed liner has been stored differently from the one that was studied, and the certificate does not record the difference. For a humid destination, ask for a desiccant and have the packing specification name it.

Each pouch and drum should show the product and hydrate, lot, certificate reference, net weight and storage condition. Without a lot number, the pack cannot be linked to a certificate, retained sample or stability file.

Lead time

Indicative dispatch is one to seven days after the specification and order are confirmed. The clock starts when grade, quantity, pack and documents are agreed; an enquiry against an open specification is not an order.

Four requests add time: a mill below the catalogue 40 mesh, a granulated grade, an outside test, and destination documents such as a certificate of origin or a translated label. Put any of them in the first message and the quotation can show the added days.

What the quotation needs

  1. The salt and hydrate, or the specification to be matched.
  2. A first quantity and an annual estimate.
  3. The dosage form: capsule, tablet, stick, gummy or drink.
  4. The destination country and the documents it requires.
  5. The mesh and bulk density the line can run.
  6. The date the shipment must arrive.

A competitor's certificate can start the conversation faster than a written specification, because it shows the methods and limits your quality team already uses. The reply can then be a counter-specification that states what can be matched and what cannot. Because packing, freight and documents follow the destination, commercial terms are set against the confirmed order.

Samples

A sample comes from a released lot and is accompanied by that lot's certificate; the quantity is agreed at enquiry. Without the certificate, the trial cannot be linked to a lot record or repeated. Ask for the grade that will ship: a 40 mesh dihydrate sample does not represent an 80 mesh milled powder, a granulated grade, or the anhydrous line.

If the sample is meant to qualify a process variant, request that variant. If it is meant to qualify a supplier, ask for the certificate and retained-sample reference at the same time. Sample freight and documents are confirmed with the request.

Payment and terms

Payment terms, Incoterm and the document list are set in the order confirmation. They depend on the destination, the order size and whether the account is new, so they belong in the quotation rather than in a published rule.

Any claim is assessed against the retained sample and the lot certificate. Tell us about a damaged pack or a mismatch as soon as it arrives, with photographs of the carton and lot label, before the material is used. The COA page lists the certificate fields; the grade page covers the salt and hydrate decision; the quality page explains the lot record and the retained sample. The product line is on the zinc citrate hub.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation