The regulatory file for zinc acetate
Zinc acetate is a zinc source, so the regulatory file is built around the permitted-source listing, the elemental zinc dose and the label. In the EU, zinc acetate appears in Annex II to Directive 2002/46/EC as a permitted zinc source for food supplements, as of this review; in the United States, the finished product sits under the dietary-supplement framework and the Supplement Facts panel declares the elemental zinc. The buyer's regulatory team confirms the route.
The specification describes the salt; the regulatory file shows the permitted source, the zinc dose and the label for the destination.
What the file has to answer
A complete file settles four points. What exactly is being bought, and which specification revision applies? Which lot does the certificate cover, and what did it measure? Which route, limits and label rules govern the finished product where it will be sold? What is the change-control route if the source, process or pack changes? The COA covers the lot, the TDS the specification and the SDS the handling; none establishes the route by itself.
For a mineral salt the route question has two layers. The first is the substance: whether the destination list includes zinc acetate as a source of zinc for the intended category. The second is the finished product: the dose, the label, the claims and the contaminant calculation. Both layers belong in the file with version numbers, because an undated certificate and an undated specification cannot be compared.
European Union
In the EU, zinc acetate is listed in Annex II to Directive 2002/46/EC, the list of vitamin and mineral substances permitted in food supplements, as of this review. The buyer's regulatory team confirms that the entry and its conditions cover the finished product. General food law (Regulation (EC) No 178/2002), labelling (Regulation (EU) No 1169/2011) and the contaminant regulation (Regulation (EU) 2023/915) apply alongside the supplement directive.
The nutrition declaration gives the zinc mass per portion and the percentage of the nutrient reference value, which is 10 mg per day for zinc in Annex XIII to Regulation (EU) No 1169/2011. The ingredient list names “zinc acetate” in the destination language. The contaminant file is a finished-product calculation: the maximum levels for lead, cadmium and mercury apply to the supplement as sold, and the daily dose has to stay inside them. The current text and any category exception are checked at the time of the order.
Great Britain uses the GB register and GB labelling, while Northern Ireland follows the EU framework. The delivery address decides which applies, and the buyer records the decision with the order.
United States
In the United States, the finished product sits under the dietary-supplement framework, with its own labelling and GMP requirements. The Supplement Facts panel declares “Zinc (as zinc acetate)” in elemental zinc, with the percentage of the daily value; the daily value used on the panel is 11 mg for adults and children four years and older, as of this review. The brand confirms the ingredient's status and any notification for the intended use, because a certificate does not determine the route.
Structure/function statements are reviewed by the brand and carry the required disclaimer; disease claims are not made. The label review is separate from the certificate, and a certificate does not approve a claim. The salt name on the panel is part of the ingredient declaration, so a panel written for zinc sulfate is not a label for the acetate.
Contaminants and the zinc dose
Contaminant limits apply to the finished product, so a drum result is only the input. Use the table as a checklist, then apply the current text and the daily dose.
| Parameter | Typical supplement reference | What the file should show |
|---|---|---|
| Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation |
| Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies |
| Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method |
| Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate |
| Zinc dose | Destination upper limit for the age group | The elemental zinc per daily portion and the check against that limit |
Zinc has a tolerable upper intake level in some markets. In the United States the adult level is 40 mg per day from all sources, as of this review; the European Food Safety Authority set 25 mg per day for adults in its re-evaluation, with lower values for younger age groups. The figure is checked against the age group on the label; the salt weight is not the dose.
Label wording and claims
The label names the material, the elemental zinc mass and the source. In the EU, the ingredient list uses “zinc acetate”, and the nutrition declaration gives the zinc mass and the percentage of the 10 mg reference value. A nutrient claim such as “source of zinc” needs 15% of the reference value in the portion, which for a supplement is the daily dose; “high” needs 30%. At 10 mg, those thresholds are 1.5 mg and 3.0 mg of zinc. The brand's reviewer checks the current annex before the wording is used.
Health claims are a separate file. The EU register of authorised claims sets the permitted wording and the conditions for zinc; the brand selects a wording that is on the register and keeps the evidence with the label. In the United States, a structure/function statement needs the disclaimer and must not be a disease claim. The acetate is part of the salt and is declared through the ingredient name, not as a separate additive. This site publishes the specification and makes no health claim.
Documents that belong in the file
- Specification with the dihydrate, CAS number, assay basis, zinc range and water range.
- COA for the lot, with individual heavy-metal results and the microbiology panel.
- Technical data sheet and safety data sheet.
- Allergen and GMO statements, origin record and a packaging declaration.
- Contaminant calculation for the finished product and the daily zinc dose.
- Label artwork and claim review, with the destination and the date of the review.
- A change-control record covering source, process and pack.
Any missing statement should be named before the order rather than discovered at the port. Version numbers on the list are worth more than a folder of undated files. Catalog data is on the product hub; the COA page explains the lot certificate; the identity page covers the analytical evidence; the quality page describes the release file; the analytical methods library covers the test methods.
Pre-order checklist
- The specification revision, dihydrate and CAS number are stated.
- The destination route and the finished-product category are confirmed by the buyer.
- The elemental zinc per daily portion is checked against the destination's upper limit.
- Contaminant figures are recalculated for the daily dose of the finished product.
- Label, nutrition declaration and claim wording have had a destination review.
- Source, process and pack sit under change control, and every document carries a version.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation