Minerals & Electrolytes · Core range
Zinc Acetate
C₄H₆O₄Zn·2H₂O · CAS 5970-45-6 · Zinc acetate dihydrate, powder
Zinc acetate dihydrate specified at 99.0–101.0% by titration with 29.0–32.0% zinc; the acetate salt and zinc sulfate are different products with different pH and counter-ion.
- Assay (titration)
- 99.0–101.0%
- Minimum order
- 1 kg
- Indicative lead time
- 1–7 days
- Standard packing
- 1 kg foil pouch25 kg fiber drum
Specification
What the certificate will report
| Assay (titration) | 99.0–101.0% |
|---|---|
| Zinc | 29.0–32.0% |
| Appearance | White to off-white powder |
| Identification | Zinc and acetate conform |
| Water (Karl Fischer) | 10.0–14.0% |
| Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Particle size | ≥95% through 80 mesh |
| Chemical formula | C₄H₆O₄Zn·2H₂O |
| CAS | 5970-45-6 |
| Marker set | Zinc acetate 99.0–101.0%; Zn 29.0–32.0% |
| Appearance | White to off-white, free-flowing powder |
| Solubility | Freely soluble in water; the solution is slightly acidic. |
Primary method Complexometric zinc and acetate titration — the method behind each figure matters as much as the figure. How the COA is built →
Technical documentation
Six documents, one standard.
Quality, procurement and regulatory pages for Zinc Acetate. Each card opens the full document; a sample COA and the technical data sheet are available on request.






What to confirm before ordering
- Name the salt: zinc acetate and zinc sulfate are different products with different pH and counter-ion.
- Ask for the assay and the zinc figure; the two are not interchangeable.
- The material is hygroscopic; the pack and the storage condition belong in the specification.
- Do not use the page as a label or a claim: the finished product's status is a separate legal question.
Buyer questions
Practical answers
What is Zinc Acetate specified to?
Assay (titration): 99.0–101.0%. The full specification adds Zinc, Appearance, Identification, Water (Karl Fischer), Heavy metals and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which form of Zinc Acetate is this?
The catalog grade is Zinc acetate dihydrate, powder. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.
Which dosage forms does this grade fit?
Capsules and tablets, Powder blends. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the crystallisation system
- Specification comparison against the specification you sent
What this page does not claim
Zinc Acetate is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.
Next step
Send the spec. We will confirm the form.
A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.