Sodium molybdate: MOQ, packaging and ordering
The smallest order for sodium molybdate is 1 kg in a foil pouch; the production pack is a 25 kg fiber drum, and the standard lead time is 1–7 days. To turn that into a quotation, send the hydrate and CAS number, the molybdenum figure, the pack, the destination and Incoterm, the documents you need and the intended use.
One kilogram is the minimum because it is the smallest pack that carries a lot code, a retention sample and a certificate of its own.
A kilogram is a lot, not a dose count
At 46.6% molybdenum, 1 kg of the anhydrous salt holds about 466 g of the element, or 4.66 million doses at 100 µg. The minimum is not sized to a project's dose count; it is the smallest unit that can be sampled, released and traced without splitting a larger batch.
Anything below that is normally a repack from a bulk lot. A repack adds a handling step and breaks the chain between the pouch, the certificate and the retained sample. The 25 kg drum goes the other way: less handling per kilogram, but it commits inventory and starts a retest clock. A microgram-dose project may not consume a drum before that clock runs out, so the pack should follow the project, not the unit size.
Packs and formats
| Pack | Net weight | Typical use | Notes |
|---|---|---|---|
| Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; close it after opening |
| Fiber drum | 25 kg | Production | Inner liner; one lot code on drum and liner |
| Granulated powder | On request | Flow and dust control | Mesh to be agreed |
The catalog powder is 40 mesh. A granulated version changes the particle profile, so it is quoted as a specification change rather than a packing preference. A diluted blend is not a catalog pack: it is a separate development item with its own carrier, assay per gram and label.
Lead time and dispatch
Standard packs leave within 1–7 days of order confirmation. That clock covers picking, paperwork and handover to the carrier; transit, customs and the customer's own release sit outside it. A granulated or custom pack needs its own date, and the quotation should show it separately.
The dispatch date is the useful commitment, not the lead-time range. A pouch and a drum do not travel the same way, and the Incoterm decides who books the parcel or the pallet and who clears the entry. The documents should be in the same consignment as the lot.
What a quotation needs
Six details make an offer firm enough to compare:
- The material. Sodium molybdate, with the hydrate and CAS number: 10141-05-6 anhydrous, 10102-40-6 dihydrate.
- The release specification. Assay, molybdenum, moisture, mesh and the contaminant limits.
- The pack and quantity. 1 kg pouch, 25 kg drum or an agreed granulation.
- The destination and trade term. Country, delivery point and Incoterm.
- The document set. COA, specification, SDS and any statement the importer needs.
- The use and market. Supplement, food or another use, and where the finished product will be sold.
Without the hydrate and the molybdenum figure an offer cannot be compared with another. Both belong in the quotation, because both feed the label arithmetic.
The sample is a lot, not a demonstration
The 1 kg pouch doubles as the qualification sample: identity, assay, molybdenum, moisture and microbiology can all be run from it, and a retention sample can be held from the same lot. The lot code should repeat on the pouch, the COA and the quotation.
A bench trial may need less than a kilogram. Ask before ordering: a split from a production lot is a repack with its own record, and it should not be presented as the catalog pack. The production drum and the bench sample are not guaranteed to be the same lot.
Terms to settle before the first order
The quotation covers commercial terms, the Incoterm, the pack, the lead time and the documents. The quality side belongs in a quality agreement: the specification revision, the COA per lot, the retention sample, the retest period and the change-notification route.
Put the molybdenum figure and the hydrate in that agreement. They are the two lines that become the label, and a change in either is a change to the product. If a lot is rejected, the retained sample and a joint re-test decide the outcome, not a photograph of the powder. Agree in advance who pays for the referee laboratory and which one is acceptable to both sides.
The catalog specification is on the product page; the release tests are on the COA page; the market files are on the compliance page; shipping and documents are covered by the logistics page; release and retention are described on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation