The regulatory file for sodium molybdate
Sodium molybdate reaches the market as a source of molybdenum, usually in supplements but sometimes in food. A usable file has to match the hydrate, the destination and the daily dose, and the importer's regulatory team owns the route decision. This page names the framework, the limits and the documents that belong in that file.
The specification describes the salt; the regulatory file establishes the route, the molybdenum limit and the label for the destination.
What the file contains
A usable file answers four things: the exact material and specification revision; the lot and its certificate; the limits and label rules for the finished product; and the change-control route for source, process or pack. The technical data sheet covers the first, the COA the second, the regulatory route the third, and only a written change procedure covers the fourth.
Sodium molybdate can be approached as a supplement ingredient or as a substance added to food, and the two routes carry different documents and limits. The importer's team decides which one applies. This page does not assert that the material is authorised, notified or permitted in any market; it lists the framework and the evidence the file should hold.
European Union
The EU file starts from general food law and the food-supplement framework. The permitted forms of vitamins and minerals are listed for food supplements, and the salt name has to appear on the current list for the destination; the buyer's team checks the consolidated text rather than a summary. Labelling follows the EU rules, where molybdenum has a nutrient reference value of 50 µg, and the contaminant limits for food supplements are set in the contaminants regulation.
Molybdenum itself is not covered by one harmonised maximum across every member state, so national limits and the upper level are checked for the destination. The Scientific Committee on Food set a tolerable upper intake level of 600 µg a day for adults, a figure that EFSA has carried forward; the file converts the product dose to elemental molybdenum before comparing it. The current texts are the reference, as of this review.
United States
The US file is built around the dietary-supplement route, the finished product and its label. Current good manufacturing practice, the Supplement Facts panel and the claim rules each apply on their own terms, and the supplier should be able to name the basis it relies on for the ingredient. If the intended use is a conventional food rather than a supplement, the additive route is a separate question and the buyer's team confirms it.
The Daily Value for molybdenum used on US labels is 45 µg for adults and children four years and older, following the 2016 revision. The upper level for adults is 2,000 µg a day, from the Institute of Medicine. Those two numbers set the label percentage and the safety comparison; neither is a target dose, and the file should show the arithmetic from the salt figure to the elemental figure.
Contaminants and the molybdenum figure
The contaminant panel is a finished-product calculation, not only a drum result. The table is the usual starting point for a supplement file; the current destination text and the daily dose decide the final limit.
| Parameter | Reference point | What the file shows |
|---|---|---|
| Molybdenum | EU upper level 600 µg/day; US upper level 2,000 µg/day | Elemental µg per serving and the total daily intake |
| Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method and finished-product calculation |
| Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception |
| Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method |
| Arsenic (As) | Market or customer limit | The agreed limit and the method |
The conversion is simple and often skipped: 1 mg of the anhydrous salt carries about 0.466 mg of molybdenum, so a 500 µg molybdenum dose is about 1.07 mg of salt. The file should carry the elemental figure, because that is the number the upper level and the label percentage refer to. A specification written only as salt weight cannot be compared with either.
Label and claims
The label names the ingredient in the form the destination requires, and the claim review is separate. In the EU, permitted health claims are listed with fixed wording and conditions, and the brand's reviewer confirms that the wording and the condition are met for the product. In the US, structure-function wording and the required disclaimer are reviewed on their own route. The certificate does not approve a claim, and a claim does not change the specification.
The ingredient line has to match the material. Sodium molybdate, molybdenum glycinate and a diluted blend are different names on a label, and a switch between them is a label change even when the elemental molybdenum figure is adjusted to match. This page makes no disease-related claim for the ingredient or the finished product.
Documents the file should hold
For each lot: the certificate of analysis, the specification version it was released against, and the heavy-metal and microbiology results. For the material: the technical data sheet, the safety data sheet, the hydrate statement, the particle-size result and the molybdenum figure. For the market: the allergen, GMO, origin and residual-solvent statements, plus any customer-specific declaration. For change control: the source, the process and the pack, with a route for notifying a change.
A document list with version numbers is more useful than a folder of undated files. Where a statement is not available for the lot, name the gap before the order rather than discovering it at the port. The certificate, the specification and the quotation should refer to the same version of the material.
Checklist before the first order
- Specification version, hydrate state and CAS number are named.
- COA, TDS, SDS and the allergen, GMO, origin and residual-solvent statements are on file.
- The molybdenum dose is converted to elemental µg and compared with the upper level.
- The contaminant results are converted to the finished-product dose.
- The label and the claim have been reviewed for the destination.
- The source, process and pack are under change control.
- The quotation, the specification and the certificate refer to the same version.
The product hub carries the catalog specification; the identity page covers the analytical evidence; the COA page explains the lot certificate. The quality page describes the release file, and the EU regulatory notes and the US regulatory notes give the framework references.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation