02.1 Iodide vs kelp

Potassium iodide vs kelp: the iodine figure and the label

Technical document 02.1 · Reviewed 2026-11-19 · Potassium Iodide

On this page
  1. The iodine figure in potassium iodide
  2. What kelp actually contains
  3. The label arithmetic
  4. What the label has to say
  5. Claims, limits and the source
  6. What to write into the specification

Potassium iodide carries 76.45% iodine by mass, and the catalog range is 75.0–78.0%, so a label dose converts by arithmetic: 150 µg of iodine needs about 196 µg of KI. Kelp is dried seaweed whose iodine content varies with species, harvest and processing, so the label has to name the source and declare a tested iodine figure. Switching between the two changes the ingredient name, the mass per dose and the evidence the file needs.

In one line

Potassium iodide has a fixed iodine figure; kelp has a variable one, so the label has to name the source and declare the amount that was tested.

The iodine figure in potassium iodide

Potassium iodide is a defined salt, so its iodine figure follows from the formula. Iodine is 126.90 of the 166.00 g/mol, or 76.45% by mass; potassium is the remaining 23.55%. The catalog assay window of 99.0–101.5% and the iodide window of 75.0–78.0% are the same statement seen from two directions. A 100% lot carries 76.45% iodine; the bottom of the assay window still carries 75.69%.

That fixed figure is what makes the label arithmetic possible. A 150 µg iodine dose needs 150 ÷ 0.7645 = 196 µg of KI, and a 1 mg iodine dose needs 1.31 mg. If the lot assay is 99.0%, divide by the assay as well. The figure is a property of the salt, not of the supplier or the batch.

What kelp actually contains

Kelp is not one material. The word covers several brown seaweeds, including Laminaria and Ascophyllum species, and the iodine content differs by species, harvest site, season and processing. Reported values for dried brown algae commonly sit between about 0.1% and 1% of dry weight, with some species higher; kelp is one of the strongest iodine accumulators in the sea. A label that says “kelp” has named a botanical, not a concentration.

The species belongs in the specification, and the label should name it so the source is unambiguous. So does the iodine figure for the lot, measured rather than assumed. Seaweed can also carry inorganic arsenic and heavy metals, so the contaminant panel is part of the source decision, not an afterthought. A kelp certificate that reports only “kelp powder” has not given the formulator a dose.

The label arithmetic

The difference in concentration is the practical point. At 0.1% iodine, 100 mg of dried kelp carries 100 µg of iodine; at 1%, the same 100 mg carries 1,000 µg. A 500 mg kelp serving therefore spans roughly 500 to 5,000 µg of iodine across that range, which is why a kelp label cannot be built on the botanical weight alone. Potassium iodide is about 765 times as concentrated as kelp at 0.1% iodine and about 76 times at 1%.

The label arithmetic runs in both directions. For KI, divide the iodine target by 0.7645 to get the salt mass. For kelp, divide the iodine target by the lot's measured iodine fraction; a certificate that gives iodine in mg/kg makes that division direct. The daily portion, the number of servings and the analysed figure are the three inputs, and the label declares the iodine that results.

What the label has to say

In the EU, the ingredient list names the source: “potassium iodide” or “kelp (species)”. The nutrition declaration gives iodine in µg and as a percentage of the 150 µg reference value. If a product contains both sources, both are named and the total iodine is declared. “Iodine from kelp” is a source statement, not a quantity; the quantity belongs in the nutrition declaration.

In the US, the Supplement Facts panel declares iodine in µg and as a percentage of the 150 µg Daily Value, and the ingredient list names the source. The species should be written out for a kelp ingredient. The label must match the source on the certificate: a kelp certificate does not support a potassium iodide claim, and the reverse is also true.

Claims, limits and the source

No disease-related claim is made for either source. In the EU, Regulation (EU) No 432/2012 lists iodine claims that may be used only with their conditions; they concern normal function, and the product must qualify as a source of iodine under the claim rules. The brand's reviewer confirms the wording and the market. In the US, a structure/function statement is written and substantiated by the brand and must carry the DSHEA disclaimer.

The label dose also has a ceiling to respect. EFSA sets a tolerable upper intake level of 600 µg per day for adults; the US Institute of Medicine sets 1,100 µg per day. These are intakes from all sources. Kelp's variable figure makes the ceiling easier to cross without intent, which is why the lot test and the serving size have to be read together.

What to write into the specification

Write the source into the specification before the label. For potassium iodide: the name, CAS 7681-11-0, assay 99.0–101.5% with the basis, iodide 75.0–78.0%, loss on drying ≤1.0%, free iodine or reducing agents, heavy metals, microbiology and particle size. For kelp: the species, the iodine figure and its method, the contaminant panel including inorganic arsenic, the particle size and the harvest or origin record.

Choose potassium iodide when the label needs a defined salt and a reproducible iodine figure. Choose kelp when the botanical is the ingredient the brand wants, but then test every lot and declare the iodine that was found. A switch in either direction is a change of source, specification, label and regulatory file, not a substitution at the weigh-up. The product hub carries the catalog specification; the grades page covers the physical forms; the compliance page covers the destination framework; the identity page covers the analytical checks; the methods notes describe the assay work; the quality page describes the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation