Potassium iodide: MOQ, packaging and ordering
The MOQ for potassium iodide is 1 kg, supplied as a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs the identity and CAS number, the assay basis, the iodide and free-iodine limits, quantity and pack, destination and Incoterm, the documents, and the intended use.
One kilogram is the smallest pack that can be sampled, tested and traced as a lot; it is a traceability unit, not a dose count.
Why the minimum is 1 kg
The 1 kg pouch is a commercial unit with a lot code, not a scoop from a drum. It is large enough to cover a bench trial, a retained sample and an independent identity test, and small enough to ship as a parcel. That combination is why it sets the minimum.
The dose count is not the reason. One kilogram of KI carries about 765 g of iodine, which is roughly 5.1 million doses at 150 µg. A small brand may never consume the pack; it still needs a traceable lot to qualify the material. Below 1 kg, the material is usually split from a larger lot and repacked, which adds handling and loses the original pack identity.
The 25 kg fiber drum is the bulk unit. It reduces handling per kilogram, but it commits inventory and a longer storage period for a hygroscopic, light-sensitive salt. The MOQ is a pack decision, not a volume incentive.
Packs and formats
| Pack | Net weight | Typical use | Notes |
|---|---|---|---|
| Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening |
| Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner |
| Dilution or premix | Agreed with the order | Low-dose blending | Carrier, assay and homogeneity are part of the specification |
Crystals are available on request in the same pack family, subject to the order. Granulation or dilution is a different specification, not a packing choice. If the dosage form needs a dilution, say so before the quotation, because the carrier, the assay and the homogeneity work move the lead time.
Lead time and dispatch
The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A dilution, a non-standard pack or an extra analytical line adds time, and the quotation should state it separately.
Potassium iodide is hygroscopic and light-sensitive, so the dispatch date matters as much as the lead time. Ask when the foil pouch (1 kg) or the drum (25 kg) will leave, and keep the COA, SDS and lot code with it. The pouch is parcel freight; the drum goes on a pallet. Freight booking and entry clearance follow the Incoterm. For crystals or a dilution, confirm the production date separately, because neither is the standard 40 mesh powder.
What a quotation needs
Six items make a quotation firm enough to compare:
- Product and form. Potassium iodide, CAS 7681-11-0, with the physical form named.
- Specification. Assay basis, iodide, loss on drying, free iodine or reducing agents, particle size, heavy metals and microbiology.
- Quantity and pack. 1 kg pouch, 25 kg drum, crystals or a dilution.
- Destination and Incoterm. The country, the port or address, and the trade term.
- Documents. COA, specification, SDS and any market-specific statement the importer needs.
- Intended use and market. Supplement, food or another use, and the market where it will be sold.
A quotation without the market and the physical form is incomplete. Commercial terms are on the quotation; this page does not carry them.
The sample is a lot, not a demonstration
The 1 kg pack is the qualification sample. Test identity, assay, iodide, loss on drying and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification.
The sample should be representative of the lot. Potassium iodide is a single salt, so segregation is not the main risk; moisture pickup and surface oxidation are. Keep the sample sealed and dark, and open it only for the sub-sample. If a smaller bench quantity is needed, discuss it before ordering: a split from a bulk lot is a repack with its own traceability, not the catalog pack.
Terms to settle before the first order
Quote potassium iodide by form and assay basis, not by name alone. The offer should name the crystals or 40 mesh powder, the 25 kg drum or the 1 kg foil pouch, the trade term and the shipping window, then add which specification version applies, the COA release lines, a retained portion, the date each lot is due for retest and the change-control route when a dilution is introduced. The iodide and free-iodine limits belong on the same sheet. Settle the quality agreement while the order is still a draft.
A potassium iodide return should start from the retained sample, not a photograph. Re-test assay on the stated basis, iodide, loss on drying and free iodine, and check the powder for caking or a yellow tint that suggests oxidation. The pouch is light- and moisture-sensitive, so record how it was stored after opening. The quotation and quality agreement should name the laboratory and who covers the referee analysis.
The product hub carries the catalog specification; the COA page lists the release tests; the stability page covers the storage risk; the potassium gluconate page shows a different potassium salt with a much lower potassium figure per gram; the quality page describes the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation